Superseded by IEEE Std 208-1995 The methods for measuring the resolution of camera systems are described. The primary application is for users and manufacturers to quantify the limit where fine detail contained in the original image is no longer reproduced by the camera system. The techniques described may also be used for laboratory measurements and for proof-of-performance specifications for a camera.
- Standard Committee
- BTS/AVTech - Audio and Visual Techniques
- Status
- Inactive-Withdrawn Standard
- Superseded by
- 208-1995
- Board Approval
- 1960-09-08
- History
-
- Withdrawn:
- 1993-06-17
- ANSI Withdrawn Date:
- 1990-04-09
- Published:
- 1960-11-30
- Reaffirmed:
- 1978-01-01
Working Group Details
- Society
- IEEE Broadcast Technology Society
- Standard Committee
- BTS/AVTech - Audio and Visual Techniques
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
205-2001
IEEE Standard on Television: Measurement of Luminance Signal Levels
A method of measuring the amplitude levels of an SMPTE 170M-1994; NTSC color or monochrome television video signal is described. It is concerned with luminance measurements at various points in transmission systems where the signals are at video frequencies. The methods described are limited to the use of waveform monitors, software video processing for amplitude assessment, or suitable oscilloscopes, and are primarily directed to specifying means of measuring television signal levels for operating purposes.
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
1521-2003
IEEE Standard for Measurement of Video Jitter and Wander
Reaffirmed March 2010. A set of metrics and methods to enable consistent measurement of the components of timing interval error in video synchronization signals is provided. By partitioning the spectra into regions of jitter and lower frequency wander (characterized as frequency offset and drift rate), timing performance can be better quantified for consistent control over nontraditional networks.
208-1995
IEEE Standard on Video Techniques: Measurement of Resolution of Camera Systems, 1993 Techniques
The methods for measuring the resolution of camera systems are described. The primary application is for users and manufacturers to quantify the limit where fine detail contained in the original image is no longer reproduced by the camera system. The techniques described may also be used for laboratory measurements and for proof-of-performance specifications for a camera.