The application layer with TCP/IP providing functions in the transport and Internet layers to enable utility management of the end user energy environment, including demand response, load control, time of day pricing, management of distributed generation, electric vehicles, etc., is defined in this standard. Depending on the physical layer in use (e.g., IEEE 802.15.4™, IEEE 802.11™, IEEE 1901™, IEEE 1901.2™), a variety of lower layer protocols may be involved in providing a complete solution. Generally, lower layer protocols are not discussed in this standard except where there is direct interaction with the application protocol. The mechanisms for exchanging application messages, the exact messages exchanged, including error messages, and the security features used to protect the application messages are defined in this standard. With respect to the Open Systems Interconnection (OSI) network model, this standard is built using the four-layer Internet stack model. Elements from many existing standards, including IEC 61968 and IEC 61850, are sourced and a RESTful architecture (Fielding [B2]) using IETF protocols such as HTTP is followed by the defined application profile. Additional files available on downloads page: https://standards.ieee.org/wp-content/uploads/2024/12/2030.5-2023_downloads.zip
- Standard Committee
- COM/PLC - Power Line Communications
- Joint Sponsors
-
BOG/SC21
- Status
- Active Standard
- PAR Approval
- 2023-03-30
- Superseding
- 2030.5-2018
- Corrigendum
-
2030.5-2023/Cor 1-2024
- Board Approval
- 2023-12-06
- History
-
- Published:
- 2024-12-11
Additional Resources
- Downloads
- 2030.5-2023_downloads.zip
Working Group Details
- Society
- IEEE Communications Society
- Standard Committee
- COM/PLC - Power Line Communications
- Working Group
-
SEP2 - Smart Energy Profile 2.0
- IEEE Program Manager
- Dalisa Gonzalez
Contact Dalisa Gonzalez
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
2030.5-2013
IEEE Adoption of Smart Energy Profile 2.0 Application Protocol Standard
The 'APPLICATION' layer with TCP/IP providing functions in the 'TRANSPORT' and 'INTERNET' layers is defined in this standard. Depending on the physical layer in use (e.g., IEEE 802.15.4(TM), IEEE 802.11(TM), IEEE 1901(TM)), a variety of lower layer protocols may be involved in providing a complete solution. Generally, lower layer protocols are not discussed in this standard except where there is a direct interaction with the application protocol. This standard defines the mechanisms for exchanging application messages, the exact messages exchanged including error messages, and the security features used to protect the application messages. With respect to the OSI network model, this standard is built using the four-layer Internet stack model. The defined application protocol is an IEC 61968 common information model [61968] profile, mapping directly where possible, and using subsets and extensions where needed, and follows an IETF RESTful architecture [REST]. (NOTE: additional files for this standard is available at http://standards.ieee.org/downloads/2030.5/)
2030.5-2018
IEEE Standard for Smart Energy Profile Application Protocol
The application layer with TCP/IP providing functions in the transport and Internet layers to enable utility management of the end user energy environment, including demand response, load control, time of day pricing, management of distributed generation, electric vehicles, etc. is defined in this standard. Depending on the physical layer in use (e.g., IEEE 802.15.4, IEEE 802.11, IEEE 1901, IEEE 1901.2), a variety of lower layer protocols may be involved in providing a complete solution. Generally, lower layer protocols are not discussed in this standard except where there is direct interaction with the application protocol. The mechanisms for exchanging application messages, the exact messages exchanged including error messages, and the security features used to protect the application messages are defined in this standard. With respect to the Open Systems Interconnection (OSI) network model, this standard is built using the four layer Internet stack model. The defined application profile sources elements from many existing standards, including IEC 61968 and IEC 61850, and follows a RESTful architecture (Fielding [B3]) using IETF protocols such as HTTP. (Additional files for downloads can be found at https://standards.ieee.org/content/dam/ieee-standards/standards/web/download/2030.5-2018_downloads.zip)
2030.5-2023/Cor 1-2024
IEEE Approved Draft Standard for Smart Energy Profile Application Protocol - Corrigendum 1
This Corrigendum was rolled into the base Standard - IEEE 2030.5-2023.
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards