Active Standard

IEEE 1819-2016

IEEE Standard for Risk-Informed Categorization and Treatment of Electrical and Electronic Equipment at Nuclear Power Generating Stations and Other Nuclear Facilities

This standard addresses the following: Risk-informed methods have been established to appropriately categorize components as either safety significant or low safety significant. Application of these methods has been shown to be safety-beneficial for existing nuclear power generating stations and nuclear facilities. No standardized approach currently exists for the detailed application of these methods to electrical and electronic components. The results of the categorization process are not easily integrated with traditional Class 1E/non-Class 1E classifications or the resulting treatment for these components. This standard provides methods to categorize electrical and electronic components using a risk-informed process and identifies how the categorization results relate to Class 1E/non-Class 1E classifications. This standard also provides a standardized and accepted method for alternate treatment of categorized components commensurate with their safety significance.

Sponsor Committee
PE/NPEC - Nuclear Power Engineering Committee
Learn More About PE/NPEC - Nuclear Power Engineering Committee
Status
Active Standard
PAR Approval
2010-03-25
Board Approval
2016-09-22
History
ANSI Approved:
2018-03-23
Published:
2017-05-12

Working Group Details

Society
IEEE Power and Energy Society
Learn More About IEEE Power and Energy Society
Sponsor Committee
PE/NPEC - Nuclear Power Engineering Committee
Learn More About PE/NPEC - Nuclear Power Engineering Committee
Working Group
WG_3.1 - Testing Working Group
IEEE Program Manager
Christian Orlando
Contact Christian Orlando
Working Group Chair
Yvonne Williams

Other Activities From This Working Group

Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.


P1819
Standard for Risk-Informed Categorization and Treatment of Electrical and Electronic Systems and Components at Nuclear Power Generating Stations and Other Nuclear Facilities

This standard identifies and discusses criteria for risk-informed categorization and treatment of electrical and electronic systems and components that are designated by the user to be placed into safety significant categories at nuclear power generating stations and other nuclear facilities.

Learn More About P1819

Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.


336-2020
IEEE Recommended Practice for Installation, Inspection, and Testing for Class 1E Power, Instrumentation, and Control Equipment at Nuclear Facilities

Considerations for the pre-installation, installation, inspection, and testing of Class 1E power, instrumentation, and control equipment and systems of a nuclear facility while in the process of installing, inspecting, and testing during new construction, modification, or maintenance are provided in this recommended practice. This recommended practice does not apply to periodic surveillance testing. For purposes of this recommended practice, in addition to a nuclear power plant, a nuclear facility is defined as a facility related to the nuclear fuel cycle from fuel processing to reprocessing and waste management.

Learn More About 336-2020

338-2022
IEEE Standard for Criteria for the Periodic Surveillance Testing of Nuclear Power Generating Station Safety Systems

Criteria for the performance of periodic surveillance testing of nuclear power generating station safety systems are provided in this standard. The scope of periodic surveillance testing consists of functional tests and checks, calibration verification, and time response measurements, as required, to verify that the safety system performs its defined safety function. Post-maintenance and post-modification testing are not covered by this document. The periodic surveillance testing requirements of IEEE NPEC nuclear standards are amplified in this standard. Some design requirements are also identified in this standard.

Learn More About 338-2022

These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.


336-1985
IEEE Standard Installation, Inspection and Testing Requirements for Power, Instrumentation, and Control Equipment at Nuclear Facilities

Requirements for installation, inspection, and testing of power, instrumentation, and control equipment and systems during the construction phase of a nuclear facility are set forth. These requirements also cover modifications and those operating phase activities that are comparable in nature and extent to related initial construction activities of the facility. The intent is to establish requirements for safety systems equipment. However, this standard may also be applied to nonsafety systems equipment.

Learn More About 336-1985

336-2005
IEEE Guide for Installation, Inspection, and Testing for Class 1E Power, Instrumentation, and Control Equipment at Nuclear Facilities

This guide provides considerations for the pre-installation, installation, inspection, and testing of Class 1E power, instrumentation, and control equipment and systems of a nuclear facility. This guidance is applicable to initial construction, modification (backfit), and maintenance activities. This guide does not apply to periodic testing.

Learn More About 336-2005

336-2010
IEEE Recommended Practice for Installation, Inspection, and Testing for Class 1E Power, Instrumentation, and Control Equipment at Nuclear Facilities

Considerations for the pre-installation, installation, inspection, and testing of Class 1E power, instrumentation, and control equipment and systems of a nuclear facility while in the process of installing, inspecting, and testing during new construction, modification, or maintenance are provided. This recommended practice does not apply to periodic testing. For purposes of this standard, in addition to a nuclear power plant, a nuclear facility is defined as a facility related to the nuclear fuel cycle from fuel processing to reprocessing and waste facilities.

Learn More About 336-2010

338-1987
IEEE Standard Criteria for the Periodic Surveillance Testing of Nuclear Power Generating Station Safety Systems

Design and operational criteria are provided for the performance of periodic testing as part of the surveillance program of nuclear power generating station safety systems. Such testing consists of functional tests and checks, calibration verification, and time-response measurements, as required, to verify that the safety system performs to meet its defined safety function. The system status, associated system documentation, test intervals, and test procedures during operation are also addressed.

Learn More About 338-1987

338-2006
IEEE Standard Criteria for the Periodic Surveillance Testing of Nuclear Power Generating Station Safety Systems

The standard provides criteria for the performance of periodic testing of nuclear power generating station safety systems. The scope of periodic testing consists of functional tests and checks, calibration verification, and time response measurements, as required, to verify that the safety system performs its defined safety function. Post-maintenance and post-modification testing are not covered by this document. This standard amplifies the periodic testing requirements of other nuclear safety-related IEEE standards. Remarks: Revision of IEEE Std 338-1987

Learn More About 338-2006

338-2012
IEEE Standard for Criteria for the Periodic Surveillance Testing of Nuclear Power Generating Station Safety

The standard provides criteria for the performance of periodic surveillance testing of nuclear power generating station safety systems. The scope of periodic surveillance testing consists of functional tests and checks, calibration verification, and time response measurements, as required, to verify that the safety system performs its defined safety function. Post-maintenance and post-modification testing are not covered by this document. This standard amplifies the periodic surveillance testing requirements of other nuclear safety-related IEEE standards.

Learn More About 338-2012

These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.


No Inactive-Withdrawn Standards

These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.


No Inactive-Reserved Standards
Subscribe to our Newsletter

Sign up for our monthly newsletter to learn about new developments, including resources, insights and more.