The application of computerized operating procedure systems (COPS), their design (i.e., form and function), and use is presented in this guide.
- Standard Committee
- PE/NPEC - Nuclear Power Engineering Committee
- Status
- Superseded Standard
- PAR Approval
- 2008-06-12
- Superseded by
- 1786-2022
- Board Approval
- 2011-06-16
- History
-
- ANSI Approved:
- 2012-07-18
- Published:
- 2011-09-22
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/NPEC - Nuclear Power Engineering Committee
- Working Group
-
WG_5.2 - Interface Design
- IEEE Program Manager
- Christian Orlando
Contact Christian Orlando - Working Group Chair
- Stephen Fleger
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
P1289
Guide for the Application of Human Factors Engineering in the Design of Computer-Based Monitoring and Control Displays for Nuclear Power Generating Stations and other Nuclear Facilities
This guide provides system design considerations, identifies information display and control techniques for use with computer-based displays, and provides human factors engineering guidance for the use of these techniques in nuclear power generating stations and other nuclear facilities.
P1786
Recommended Practice for Human Factors Applications of Computerized Operating Procedure Systems at Nuclear Power Generating Stations and Other Nuclear Facilities
This document provides recommendations for the application of computerized operating procedure systems (COPS). These recommendations concern the design (i.e., form and function) and use of COPS. In general, this recommended practice does not provide recommendations for the technical content of the operating procedures being presented except as needed to address unique aspects of procedure implementation on COPS. Considerations for step-by-step instructions to be used at local control stations, or on mobile devices, such as field operating procedures, as well as procedures for maintenance and testing, are provided in an informative annex.
P2421
Guide for Designing and Developing Computer-Based Displays for Monitoring and Control of Nuclear Facilities
This document provides design process guidance for developing computer-based graphical user interface (GUI) displays, including their form and function. This guidance applies to GUI display systems provided with new nuclear power generating stations and other nuclear facilities, or as digital upgrades to existing facilities, including monitoring and controls systems. The scope ranges from small modular panel inserts limited to single systems through multiple workstations intended to monitor and/or control the entire nuclear facility. The guidance applies for displays used within or outside of the main control room (MCR). This guidance does not cover the technical details found in IEEE Std 1289.
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
1786-2022
IEEE Guide for Human Factors Applications of Computerized Operating Procedure Systems (COPS) at Nuclear Power Generating Stations and Other Nuclear Facilities
The application of computerized operating procedure systems (COPS), their design (i.e., form and function), and use is presented in this guide.
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
1289-1998
IEEE Guide for the Application of Human Factors Engineering in the Design of Computer-Based Monitoring and Control Displays for Nuclear Power Generating Stations
System design considerations, information display and control techniques for use with computer-based displays, and human factors engineering guidance for the use of these tech-niques in nuclear power generating stations are provided.