Information on the differences between stationary standby and stationary cycling applications and appropriate battery management strategies in cycling operations is covered in this guide. While the primary emphasis is on lead-acid batteries, information is also provided on alternative and emerging storage technologies. The management of battery systems in stationary standby service is covered in other IEEE documents and is beyond the scope of this guide.
- Standard Committee
- PE/ESSB - Energy Storage & Stationary Battery Committee
- Status
- Active Standard
- PAR Approval
- 2016-09-22
- Superseding
- 1660-2008
- Board Approval
- 2018-09-27
- History
-
- Published:
- 2019-01-24
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/ESSB - Energy Storage & Stationary Battery Committee
- Working Group
-
WG_1660 - Application and Management Battery Cycling Working Group
- IEEE Program Manager
- Michael Kipness
Contact Michael Kipness - Working Group Chair
- Christopher Searles
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
1660-2008
IEEE Guide for Application and Management of Stationary Batteries Used in Cycling Service
This guide provides information on the differences between stationary standby and stationary cycling applications and appropriate battery management strategies in cycling operations. While the primary emphasis is on lead-acid batteries, information is also provided on alternative and emerging storage technologies. The management of battery systems in stationary standby service is covered in other IEEE documents and is beyond the scope of this guide.
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards