This standard provides an outline for the software documentation that shall be developed and delivered for rail equipment and systems.
- Standard Committee
- VT/RTSC - Rail Transportation Standards Committee
- Status
- Inactive-Reserved Standard
- PAR Approval
- 2000-01-30
- Board Approval
- 2004-09-23
- History
-
- ANSI Approved:
- 2005-02-02
- Published:
- 2005-03-23
- Inactivated Date:
- 2019-11-07
Working Group Details
- Society
- IEEE Vehicular Technology Society
- Standard Committee
- VT/RTSC - Rail Transportation Standards Committee
- Working Group
-
ADMIN - Project Administration
- IEEE Program Manager
- Soo Kim
Contact Soo Kim
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
16-2004
IEEE Standard for Electrical and Electronic Control Apparatus on Rail Vehicles
Revision of IEEE Std 16-1955. This standard is intended to provide a set of uniform design, application, and test requirements for electrical and electronic control apparatus on rail vehicles.
1653.3-2012
IEEE Guide for Rail Transit Traction Power Systems Modeling
A description of the data, techniques, and procedures typically used in modeling and analysis of traction power systems is provided in this guide.
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
1536-2002
IEEE Standard for Rail Transit Vehicle Battery Physical Interface
This standard prescribes the maximum dimensional requirements of each battery tray for a specific number of cells and battery capacity rating. The battery hardware requirement and battery compartment are also prescribed.
1568-2003
IEEE Recommended Practice for Electrical Sizing of Nickel-Cadmium Batteries for Rail Passenger Vehicles
Method for defining the electrical load supplied by a nickel-cadmium battery and for sizing the battery to supply that load is described in this recommended practice.