A concise overview of shielding options for various types of interference is discussed in this guide. Recommendations on shielding practices for low voltage cables are given. Suggestions on terminating and grounding methods are provided.
- Standard Committee
- PE/IC - Insulated Conductors
- Status
- Inactive-Reserved Standard
- PAR Approval
- 2006-03-16
- Superseding
- 1143-1994
- Board Approval
- 2012-12-05
- History
-
- ANSI Approved:
- 2014-10-27
- Published:
- 2013-03-04
- Inactivated Date:
- 2023-03-30
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/IC - Insulated Conductors
- Working Group
-
D11W/P1143_WG - Working Group for Shielding Practice for Low Voltage Cables (D11W)
- IEEE Program Manager
- Dalisa Gonzalez
Contact Dalisa Gonzalez - Working Group Chair
- Kenneth Bow
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
P1143
Guide on Shielding Practice for Low Voltage Cables
This guide addresses the shielding practice, systems, and test methods of low voltage cables. The guide includes: - a review of shielding techniques to control electrostatic and electromagnetic interference for varying types of low voltage cable used for power, control and instrumentation services, including signal and communications cable; - an overview of the functional characteristics of various types of shielding; - recommendations on shielding practices, including suggestions on terminating and grounding methods; - suggested tests or techniques for measuring shielding effectiveness. An overview of typical tests of cable shielding is provided for information.
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards