This standard is intended to be a basic or primary document that can be utilized and referenced by owners of ac motors and generators (machines) that need refurbishment, repair, and/or rewinding, as well as service or repair facilities. It has been developed for the petroleum, chemical, and process industries, and it may be adapted to other areas of interest. The use of this standard is expected to result in higher quality and more cost-effective, timely repairs. A means of evaluating work performed and repair or service facilities is also provided.
- Standard Committee
- IAS/PCI - Petroleum and Chemical Industry
- Status
- Active Standard
- PAR Approval
- 2014-03-27
- Superseding
- 1068-2009
- Board Approval
- 2015-12-05
- History
-
- ANSI Approved:
- 2017-05-22
- Published:
- 2016-01-15
Working Group Details
- Society
- IEEE Industry Applications Society
- Standard Committee
- IAS/PCI - Petroleum and Chemical Industry
- Working Group
-
1068_WG - Repair and Rewinding of Electric Motors
- IEEE Program Manager
- Michael Kipness
Contact Michael Kipness - Working Group Chair
- Charles Yung
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
P1068
Standard for the Repair and Rewinding of AC Electric Motors in the Petroleum, Chemical, and Process Industries
This document covers general recommendations for the repair of alternating current (ac) electric motors and includes guidelines for both the user and the repair facility. It does not replace specific instructions contained in the manufacturer's instruction book or in any contractual agreement between a manufacturer and a purchaser of a given machine. For this document, the term motor is used in lieu of and shall equate to the terms wound rotor, generator, and machine. This standard covers reconditioning, repairing, and rewinding of horizontal and vertical induction motors and of synchronous motors. It applies to all voltages 15 kV and less, and power ratings above 0.75 kW (1 hp). This standard applies only to the repair of motors, and in cases involving modifications to the basic design, care must be taken so as not to negatively affect the safety and reliability of the motor. Excluded from the scope of this standard are the following: specific requirements, certifications and inspections required for explosion proof, dust-ignition proof, flameproof, and like motors that have a listing issued by a Nationally Recognized Testing Laboratory (NRTL) such as American Bureau of Shipping (ABS), Underwriters Laboratories, Inc. (UL), Factory Mutual (FM), and Canadian Standards Association (CSA). For motors listed by a NRTL, the user shall specify if the repair facility shall be certified by such an agency for any specific or additional requirements for hermetic motors, hydrogen-cooled generators, submersible motors, Class 1E nuclear service motors, or direct current (dc) motors.
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
1068-2009
IEEE Standard for the Repair and Rewinding of AC Electric Motors in the Petroleum, Chemical, and Process Industries
This standard is intended to be a basic or primary document that can be utilized and referenced by owners of ac motors and generators (machines) that need refurbishment, repair, and/or rewinding, as well as service or repair facilities. It has been developed for the petroleum, chemical, and process industries, and it may be adapted to other areas of interest. The use of this standard is expected to result in higher quality and more cost effective, and timely repairs. A means of evaluating work performed and repair or service facilities is also provided.
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards