Direction is provided for the selection of monitoring and for diagnostic parameters to be used with high-voltage circuit breakers (i.e., above 1000 V). Guidance on appropriate parameters to be considered…
An optical interface for use between teleprotection and digital multiplexer equipment that can operate at a data rate of N times 64 kilobit per second where N = 1, 2…12…
Procedures for demonstrating the adequacy of new Class 1E transformers, located in a mild environment of a nuclear power generating station, to perform their required safety functions under postulated service…
This document is intended to serve as basic reference for the specification and design of field discharge circuits for synchronous machines. It is also intended to provide detailed information about…
This standard is intended for use as a basis for establishing the performance, interchangeability, and safety of the equipment covered and to assist in the proper selection of such equipment.
The development of specifications for the technical requirements for the design, fabrication, testing, installation, and in-service performance of a high-voltage gas-insulated substation (GIS) are covered in this guide.
Common requirements for associating time tags with data items recorded or transmitted by Intelligent Electronic Devices (IEDs) are established in this standard. Time tag attributes and requirements for describing time…
The design, installation, and monitoring of time synchronization systems in power utility substations is covered. This includes time sources such as Global Positioning Satellite (GPS) and time distribution systems such…
This corrigendum clarifies temperature control for aging experiments in 4.5.1 that was a result of the combination of the two previous test standards. This corrigendum selects the method from the…
