Goals for the design of electrical systems that include both linear and nonlinear loads are established in this recommended practice. The voltage and current waveforms that may exist throughout the…
Basic factors and general considerations in selecting the class and means of neutral grounding for electrical generating plant auxiliary power systems are given in this guide. Apparatus to be used…
Amendment to IEEE Std C57.18.10-1998. This standard practice provides rating data, construction requirements, testing, and calculation methods for dry-type or liquid-filled semiconductor power rectifier transformers. These transformers supply nonsinusoidal load…
This amendment revises IEEE Std C37.20.1-2002. Use of "dummy elements," previously allowed for short-circuit tests in 6.2.4 and 6.2.5.2, is eliminated. Errors made in converting areas in Table 10 to…
Revision of IEEE Std 592-1990. Design test for shield resistance and a simulated fault-current initiation for exposed semiconducting shields used on cable accessories, specifically joints and separable insulated connectors rated…
This standard covers bar code label requirements for specific types of distribution transformers and step-voltage regulators. Data content for temporary and permanent bar code labeling is described as well as…
Recommendations and guidance for distributed resources (DR) interconnected on the distribution secondary networks, including both spot networks and grid networks, are provided. This document gives an overview of distribution secondary…
Electronic devices that develop or utilize analog signals are not presently covered by standards. This Standard provides interface connectivity of modern power-system signal transducers based on electronics, such as magneto-optic…
Certain electrical, dimensional, and mechanical characteristics are set forth as well as certain safety features of three-phase, 60 Hz, mineral-oil-immersed, self-cooled, pad-mounted, compartmental-type distribution transformers. These transformers are rated 5…
