Two standard methods for field-strength measurement are described. The standard-antenna method consists of measuring the received power or open-circuit voltage developed in a standard receiving antenna by the field to be measured and computing the field strength from the measured voltage and the dimensions and form of the standard antenna. The standard-field method consists of comparing voltages produced in an antenna by the field to be measured and by a standard field, the magnitude of which is computed from the dimensions of the transmitting antenna, its current distribution, the distance of separation, and effect of the ground. The measurement procedures are outlined, including calibration of commercial field strength and extension of the methods to microwave frequencies. Methods for measuring power radiated from an antenna under several different conditions are briefly presented, and the important considerations for securing useful and accurate measurements are described.
- Standard Committee
- APS/P - Propagation
- Status
- Superseded Standard
- Superseded by
- 291-1991
- History
-
- Published:
- 1969-05-01
- Reaffirmed:
- 1981-05-21
Working Group Details
- Society
- IEEE Antennas and Propagation Society
- Standard Committee
- APS/P - Propagation
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards