This document defines a recommended practice for the design, testing, and operation of secure communications networks for monitoring and control within and between electric power substations and related facilities.
- Standard Committee
- PE/PSCC - Power System Communications and Cybersecurity
- Status
- Active PAR
- PAR Approval
- 2020-12-03
- Superseding
- 1615-2019
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/PSCC - Power System Communications and Cybersecurity
- Working Group
-
P0_1615WG - Network Communications in Substations_1615
- IEEE Program Manager
- Tom Thompson
Contact Tom Thompson - Working Group Chair
- James Bougie
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
1615-2019
IEEE Recommended Practice for Network Communication in Electric Power Substations
Recommended practices for communication and interoperation of devices connected on an electric power substation Internet Protocol (IP) network are provided. An introduction to the concepts that need to be mastered as well as specific recommendations to follow when deploying the technologies are provided for the power engineer new to IP networking. Direction and requirements to facilitate interoperable electric utility information networks are provided for equipment manufacturers and system integrators.
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
1615-2007
IEEE Recommended Practice for Network Communication in Electric Power Substations
Recommended practices for communication and interoperation of devices connected on an electric power substation Internet protocol (IP) network are provided. For the power engineer new to IP networking, this document provides an introduction to the concepts that need to be mastered as well as specific recommendations to follow when deploying the technologies. For equipment manufacturers and system integrators, it provides direction and requirements to facilitate interoperable electric utility information networks.
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards