This application guide provides information on what a basic faulted circuit indicator (FCI) is designed to do, and describes methods for selecting FCIs. The application of FCIs to single-phase, 200 A, underground residential distribution (URD) circuits is described.
- Standard Committee
- PE/IC - Insulated Conductors
- Status
- Inactive-Reserved Standard
- PAR Approval
- 1990-02-15
- Board Approval
- 2000-12-07
- History
-
- ANSI Approved:
- 2001-05-03
- Published:
- 2001-04-13
- Reaffirmed:
- 2006-09-15
- Inactivated Date:
- 2019-11-07
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/IC - Insulated Conductors
- Working Group
-
B17W/P1610_WG - Faulted Circuit Indicator Working Group B17W
- IEEE Program Manager
- Dalisa Gonzalez
Contact Dalisa Gonzalez - Working Group Chair
- Francis Angerer
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
1610-2016
IEEE Guide for the Application of Faulted Circuit Indicators on Distribution Circuits
Information on what a faulted circuit indicator (FCI) is designed to do, along with methods for selecting and applying FCIs for 200 / 600 A distribution circuits are described in this application guide.
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
1610-2007
IEEE Guide for the Application of Faulted Circuit Indicators for 200 / 600 A, Three-phase Underground Distribution
This document specifies an exchange format, using XML, for identifying all of the hardware, software, and documentation associated with a unit under test (UUT). This UUT may be tested and diagnosed using a test program set (TPS) on an automatic test system (ATS).
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards