Active Standard

IEEE 802-2014

IEEE Standard for Local and Metropolitan Area Networks: Overview and Architecture

This standard provides an overview to the family of IEEE 802® standards. It describes the reference models for the IEEE 802 standards and explains the relationship of these standards to the higher layer protocols; it provides a standard for the structure of IEEE 802 MAC addresses; it provides a standard for identification of public, private, prototype, and standard protocols; it specifies an object identifier hierarchy used within IEEE 802 for uniform allocation of object identifiers used in IEEE 802 standards; and it specifies a method for higher layer protocol identification. (The PDF of this standard is available at no charge compliments of the IEEE GET Program. Visit https://ieeexplore.ieee.org/browse/standards/get-program/page/series?id=68 for more details.)

Sponsor Committee
C/LAN/MAN - LAN/MAN Standards Committee
Learn More About C/LAN/MAN - LAN/MAN Standards Committee
Status
Active Standard
PAR Approval
2007-02-27
Superseding
802-2001
Amendments
802c-2017
802d-2017
802f-2023
Board Approval
2014-06-12
History
Published:
2014-06-30

Working Group Details

Society
IEEE Computer Society
Learn More About IEEE Computer Society
Sponsor Committee
C/LAN/MAN - LAN/MAN Standards Committee
Learn More About C/LAN/MAN - LAN/MAN Standards Committee
Working Group
802.1 WG - Higher Layer LAN Protocols Working Group
IEEE Program Manager
Jodi Haasz
Contact Jodi Haasz
Working Group Chair
Glenn Parsons

Other Activities From This Working Group

Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.


P60802
Time-Sensitive Networking Profile for Industrial Automation

This document defines time-sensitive networking profiles for industrial automation. The profiles select features, options, configurations, defaults, protocols, and procedures of bridges, end stations, and LANs to build industrial automation networks. This document specifies YANG modules defining read-only information available online and offline as a digital data sheet. This document also specifies YANG modules for remote procedure calls and actions to address requirements arising from industrial automation networks.

Learn More About P60802

P802
IEEE Draft Standard for Local and Metropolitan Area Networks: Overview and Architecture

This standard provides an overview to the family of IEEE 802® standards. It describes the reference models for the IEEE 802 standards and explains the relationship of these standards to the higher layer protocols; it provides a standard for the structure of IEEE 802 MAC addresses; it provides a standard for identification of public, private, prototype, and standard protocols; it specifies an object identifier hierarchy used within IEEE 802 for uniform allocation of object identifiers used in IEEE 802 standards; and it specifies a method for higher layer protocol identification.

Learn More About P802

P802.1ACea
IEEE Standard for Local and metropolitan area networks -- Media Access Control (MAC) Service Definition Amendment: Support for IEEE Std 802.15.6

This project adds support of the Internal Sublayer Service by the IEEE Std 802.15.6 MAC entity. This amendment also includes technical and editorial corrections in the description of existing IEEE Std 802.1AC functionality.

Learn More About P802.1ACea

P802.1AS
Standard for Local and Metropolitan Area Networks--Timing and Synchronization for Time-Sensitive Applications

This standard specifies protocols, procedures, and managed objects used to ensure that the synchronization requirements are met for time-sensitive applications, such as audio, video, and time-sensitive control, across networks, for example, IEEE 802 and similar media. This includes the maintenance of synchronized time during normal operation and following addition, removal, or failure of network components and network reconfiguration. It specifies the use of IEEE 1588(TM) specifications where applicable in the context of IEEE Std 802.1Q(TM). Synchronization to an externally provided timing signal [e.g., a recognized timing standard such as Coordinated Universal Time (UTC) or International Atomic Time (TAI)] is not part of this standard but is not precluded.

Learn More About P802.1AS

P802.1ASdm
IEEE Draft Standard for Local and Metropolitan Area Networks - Timing and Synchronization for Time-Sensitive Applications - Amendment: Hot Standby and Clock Drift Error Reduction

This amendment to IEEE Std 802.1AS™-2020 specifies hot standby and addresses errors and omissions in the description of existing functionality.

Learn More About P802.1ASdm

P802.1ASdn
IEEE Draft Standard for Local and Metropolitan Area Networks - Timing and Synchronization for Time-Sensitive Applications Amendment: YANG Data Model

A YANG data model that allows configuration and state reporting for all managed objects of the base standard is specified in this amendment.

Learn More About P802.1ASdn

P802.1ASds
Standard for Local and Metropolitan Area Networks--Timing and Synchronization for Time-Sensitive Applications Amendment: Support for the IEEE Std 802.3 Clause 4 Media Access Control (MAC) operating in half-duplex

This amendment specifies protocols, procedures, and managed objects that support IEEE Std 802.3 Clause 4 Media Access Control (MAC) operating in half-duplex while retaining existing functionality and backward compatibility, and remaining a profile of IEEE Std 1588-2019. This amendment addresses errors and omissions in the description of existing functionality.

Learn More About P802.1ASds

P802.1ASeb
IEEE Standard for Local and Metropolitan Area Networks--Timing and Synchronization for Time-Sensitive Applications Amendment: Optional Use of Announce

This amendment provides additions and modifications to enable the Announce message functionality to be optional on new implementations, while maintaining the ability for implementations to support backward compatibility, interoperability, and full conformance with IEEE Std 1588™-2019. Protocols, procedures, and managed objects are updated if and as required to reflect the availability and use of Announce. This amendment also includes technical and editorial corrections in the description of existing IEEE Std 802.1AS functionality.

Learn More About P802.1ASeb

P802.1AXdz
IEEE Standard for Local and Metropolitan Area Networks--Link Aggregation Amendment: YANG for Link Aggregation

This amendment specifies YANG modules that allow configuration and status reporting for systems implementing Link Aggregation, and optionally Distributed Resilient Network Interconnect, based on the capabilities currently specified in clause 7 (management) and Annex D (Management Information Base definitions). This amendment also includes technical and editorial corrections in the description of existing IEEE Std 802.1AX functionality.

Learn More About P802.1AXdz

P802.1CB-2017/Cor 1
IEEE Standard for Local and metropolitan area networks--Frame Replication and Elimination for Reliability - Corrigendum 1

Correction of technical and editorial errors identified and agreed by the IEEE 802.1 Working Group maintenance activity comprising: https://www.802-1.org/items/431, https://www.802-1.org/items/451, https://www.802-1.org/items/456, and https://www.802-1.org/items/471. The management module changes needed are applicable in the context of IEEE Std 802.1CBcv(TM)-2021.

Learn More About P802.1CB-2017/Cor 1

P802.1CQ
Standard for Local and Metropolitan Area Networks: Multicast and Local Address Assignment

This standard specifies protocols, procedures, and management objects for locally-unique assignment of 48-bit and 64-bit addresses in IEEE 802 networks. Peer-to-peer address claiming and address server capabilities are specified.

Learn More About P802.1CQ

P802.1DC
IEEE Draft Standard for Local and metropolitan area networks--Quality of Service Provision by Network Systems

This standard specifies procedures and managed objects for quality of service (QoS) features specified in IEEE Std 802.1Q, such as Per-Stream Filtering and Policing, queuing, transmission selection, stream control, and frame preemption, in a network system that is not a Bridge.

Learn More About P802.1DC

P802.1DG
IEEE Draft Standard for Time-Sensitive Networking Profile for Automotive In-Vehicle Ethernet Communications

This standard specifies profiles for secure, highly reliable, deterministic latency, automotive in-vehicle bridged IEEE 802.3 Ethernet networks based on IEEE 802.1 Time-Sensitive Networking (TSN) standards and IEEE 802.1 Security standards.

Learn More About P802.1DG

P802.1DP
Standard for Local and Metropolitan Area Networks - Time-Sensitive Networking for Aerospace Onboard Ethernet Communications

This standard specifies profiles of IEEE 802.1 Time-Sensitive Networking (TSN) and IEEE 802.1 Security standards for aerospace onboard bridged IEEE 802.3 Ethernet networks. The profiles select features, options, configurations, defaults, protocols, and procedures of bridges, end stations, and Local Area Networks to build deterministic networks for aerospace onboard communications.

Learn More About P802.1DP

P802.1DU
Standard for Local and Metropolitan Area Networks - Cut-Through Forwarding Bridges and Bridged Networks

This standard specifies Cut-Through Forwarding (CTF) bridges based on the IEEE 802.1Q bridge architecture, including protocols, procedures, and managed objects. CTF bridges interconnect individual local area networks (LANs) using different or identical media access control (MAC) methods with and without support for CTF. This standard also details the usage of CTF bridges in bridged networks.

Learn More About P802.1DU

P802.1Q
Standard for Local and Metropolitan Area Networks--Bridges and Bridged Networks

This standard specifies Bridges that interconnect individual LANs, each supporting the IEEE 802 MAC Service using a different or identical media access control method, to provide Bridged Networks and VLANs.

Learn More About P802.1Q

P802.1Qdd
Standard for Local and Metropolitan Area Networks--Bridges and Bridged Networks Amendment: Resource Allocation Protocol

This amendment specifies protocols, procedures, and managed objects for a Resource Allocation Protocol (RAP) that uses the Link-local Registration Protocol (LRP) and supports and provides backwards compatibility with the stream reservation and quality of service capabilities, controls and protocols specified in IEEE Std 802.1Q. RAP provides support for accurate latency calculation and reporting, can use redundant paths established by other protocols, and is not limited to bridged networks.

Learn More About P802.1Qdd

P802.1Qdq
Standard for Local and Metropolitan Area Networks--Bridges and Bridged Networks Amendment: Shaper Parameter Settings for Bursty Traffic Requiring Bounded Latency

This amendment adds an informative annex that describes recommended shaper parameter settings for bursty traffic requiring bounded latency.

Learn More About P802.1Qdq

P802.1Qdt
Standard for Local and Metropolitan Area Networks--Bridges and Bridged Networks Amendment: Priority-based Flow Control Enhancements

This amendment specifies procedures and managed objects for automated Priority-based Flow Control (PFC) headroom calculation and Media Access Control Security (MACsec) protection of PFC frames, using point-to-point roundtrip measurement and enhancements to the Data Center Bridging Capability Exchange protocol (DCBX). This amendment places emphasis on the requirements for low latency and lossless transmission in large-scale and geographically dispersed data centers. This amendment also addresses errors of the existing IEEE Std 802.1Q functionality.

Learn More About P802.1Qdt

P802.1Qdv
Standard for Local and Metropolitan Area Networks--Bridges and Bridged Networks Amendment: Enhancements to Cyclic Queuing and Forwarding

This amendment specifies procedures, protocols and managed objects to enhance Cyclic Queuing and Forwarding, comprising: a transmission selection procedure that organizes frames in a traffic class output queue into logical bins that are output in strict rotation at a constant frequency; a procedure for storing received frames into bins based on the time of reception of the frame; a procedure for storing received frames into bins based on per-flow octet counters; a protocol for determining the phase relationship between a transmitter's and a receiver's bin boundaries in time; managed objects, Management Information Base (MIB), and YANG modules for controlling these procedures; and an informative annex to provide guidance for applying these procedures. This amendment also addresses errors and omissions in the description of existing IEEE Std 802.1Q functionality.

Learn More About P802.1Qdv

P802.1Qdw
Standard for Local and Metropolitan Area Networks--Bridges and Bridged Networks Amendment: Source Flow Control

This amendment specifies procedures, managed objects, and a YANG data model for the signaling and remote invocation of flow control at the source of transmission in a data center network. This amendment specifies enhancements to the Data Center Bridging Capability (DCBX) protocol to advertise the new capability. This amendment specifies the optional use of existing stream filters to allow bridges at the edge of the network to intercept and convert signaling messages to existing Priority-based Flow Control (PFC) frames. This amendment also addresses technical and editorial corrections to existing IEEE Std 802.1Q functionality.

Learn More About P802.1Qdw

P802.1Qdy
IEEE Draft Standard for Local and Metropolitan Area Networks - Bridges and Bridged Networks -Amendment: YANG for the Multiple Spanning Tree Protocol

This amendment to IEEE Std 802.1Q-2022 as amended by IEEE Std 802.1Qcz-2023, IEEE Std 802.1Qcw-2023, IEEE Std 802.1Qcj-2023, IEEE Std 802.1Qdj-2024, and IEEE Std 802.1Qdx-2024 addresses Multiple Spanning Tree Protocol (MSTP) requirements arising from industrial automation networks. It specifies YANG for bridge and bridge component RSTP and MSTP configuration and status reporting.

Learn More About P802.1Qdy

Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.


802.1AB-2016
IEEE Standard for Local and metropolitan area networks - Station and Media Access Control Connectivity Discovery

This document defines a protocol and a set of managed objects that can be used for discovering the physical topology from adjacent stations in IEEE 802(R) LANs. (The PDF of this standard is available at no cost compliments of the IEEE GET program. Additional downloads are attached or can be downloaded at https://ieeexplore.ieee.org/browse/standards/get-program/page)

Learn More About 802.1AB-2016

802.1ABcu-2021
IEEE Standard for Local and metropolitan networks--Station and Media Access Control Connectivity Discovery Amendment 1: YANG Data Model

This amendment to IEEE Std 802.1AB-2016 specifies a Unified Modeling Language (UML)-based information model and a YANG data model that allows configuration and status reporting for bridges and bridge components with regards to topology discovery. (The PDF of this standard is available at no charge compliments of the IEEE GET program https://ieeexplore.ieee.org/browse/standards/get-program/page/series?id=68)

Learn More About 802.1ABcu-2021

802.1ABdh-2021
IEEE Standard for Local and metropolitan area networks-- Station and Media Access Control Connectivity Discovery Amendment 2: Support for Multiframe Protocol Data Units

This amendment to IEEE Std 802.1AB(TM)-2016 specifies protocols, procedures and managed objects that support the transmission and reception of a set of Link Layer Discovery Protocol (LLDP) Type/Length/Values (TLVs) that exceed the space available in a single frame. (The PDF of this standard is available at no charge compliments of the IEEE GET program at https://ieeexplore.ieee.org/browse/standards/get-program/page/series?id=68)

Learn More About 802.1ABdh-2021

802.1AC-2016
IEEE Standard for Local and metropolitan area networks -- Media Access Control (MAC) Service Definition

The MAC Service and the Internal Sublayer Service (ISS) are defined in this standard. This standard specifies media-dependent convergence functions that map IEEE 802(R) MAC interfaces to the ISS. The MAC Service is derived from the ISS. (The PDF of this standard is available at no charge compliments of the IEEE GET Program https://ieeexplore.ieee.org/browse/standards/get-program/page)

Learn More About 802.1AC-2016

802.1AC-2016/Cor 1-2018
IEEE Standard for Local and Metropolitan Area Networks--Media Access Control (MAC) Service Definition - Corrigendum 1: Logical Link Control (LLC) Encapsulation EtherType

This corrigendum to IEEE Std 802.1AC™-2016 corrects the value of the LLC Encapsulation EtherType.(The PDF of this standard is available at no cost to you compliments of the IEEE GET program https://ieeexplore.ieee.org/browse/standards/get-program/page)

Learn More About 802.1AC-2016/Cor 1-2018

802.1ACct-2021
IEEE Standard for Local and Metropolitan Area networks--Media Access Control (MAC) Service Definition-Amendment 1: Support for IEEE Std 802.15.3

The Internal Sublayer Service for the IEEE 802.15.3 MAC entity is defined in this amendment. (The PDF of this standard is available at no cost via the IEEE GET program at https://ieeexplore.ieee.org/browse/standards/get-program/page/series?id=68)

Learn More About 802.1ACct-2021

802.1AE-2018
IEEE Standard for Local and metropolitan area networks-Media Access Control (MAC) Security

How all or part of a network can be secured transparently to peer protocol entities that use the MAC Service provided by IEEE 802u00ae LANs to communicate is specified in this standard. MAC security (MACsec) provides connectionless user data confidentiality, frame data integrity, and data origin authenticity.(The PDF of this standard is available at no cost to you compliments of the IEEE GET program https://ieeexplore.ieee.org/browse/standards/get-program/page)

Learn More About 802.1AE-2018

802.1AE-2018/Cor 1-2020
IEEE Standard for Local and metropolitan area networks--Media Access Control (MAC) Security Corrigendum 1: Tag Control Information Figure

How all or part of a network can be secured transparently to peer protocol entities that use the MAC Service provided by IEEE 802(R) LANs to communicate is specified in this standard. AC security (MACsec) provides connectionless user data confidentiality, data frame integrity, and data origin authenticity. (The PDF of this standard is available at no cost compliments of the IEEE GET program at https://ieeexplore.ieee.org/browse/standards/get-program/page/series?id=68)

Learn More About 802.1AE-2018/Cor 1-2020

802.1AEdk-2023
IEEE Standard for Local and metropolitan area networks-Media Access Control (MAC) Security Amendment 4: MAC Privacy protection

This amendment specifies a MAC Privacy protection encapsulating protocol and its use in conjunction with the MAC Security protocol (MACsec) to hide the source and destination MAC addresses of user data frames, and to reduce any correlation between observable frame sizes and transmission timing. This helps to protect user and application identities and to hide the purpose and content of communications. Management of MACsec and privacy protection is supported by YANG models and SNMP MIBs. Privacy considerations for bridged networks are reviewed. (The PDF of this standard is available at no cost compliments of the IEEE GET Program https://ieeexplore.ieee.org/browse/standards/get-program/page/series?id=68)

Learn More About 802.1AEdk-2023

802.1AR-2018
IEEE Standard for Local and Metropolitan Area Networks - Secure Device Identity

A Secure Device Identifier (DevID) is cryptographically bound to a device and supports authentication of the device's identity. An Initial Device Identifier (IDevID) provide by the supplier of a device can be supplemented by Local Device Identifiers (LDevIDs) facilitating enrollment (provisioning of authentication and authorization credentials) by local network administrators. (The PDF of this standard is available at no cost compliments of the IEEE GET Program at https://ieeexplore.ieee.org/browse/standards/get-program/page)

Learn More About 802.1AR-2018

802.1AS-2020
IEEE Standard for Local and Metropolitan Area Networks--Timing and Synchronization for Time-Sensitive Applications

Protocols, procedures, and managed objects for the transport of timing over local area networks are defined in this standard. It includes the transport of synchronized time, the selection of the timing source (i.e., best master), and the indication of the occurrence and magnitude of timing impairments (i.e., phase and frequency discontinuities). (The PDF of this standards is available at no cost to you compliments of the IEEE GET program https://ieeexplore.ieee.org/browse/standards/get-program/page/series?id=68)

Learn More About 802.1AS-2020

802.1AS-2020/Cor 1-2021
IEEE Standard for Local and Metropolitan Area Networks--Timing and Synchronization for Time-Sensitive Applications - Corrigendum 1: Technical and Editorial Corrections

Technical and editorial corrections to IEEE Std 802.1AS™-2020 are provided in this corrigendum. (The PDF of this standard is available at no charge compliments of the IEEE GET program at https://ieeexplore.ieee.org/browse/standards/get-program/page/series?id=68)

Learn More About 802.1AS-2020/Cor 1-2021

802.1ASdr-2024
IEEE Standard for Local and Metropolitan Area Networks--Timing and Synchronization for Timeu2010Sensitive Applications Amendment 1: Inclusive Terminology

This amendment to IEEE Std 802.1AS™-2020 replaces terminology with alternative terminology identified by IEEE Std 1588g™-2022. All changes made in figures are only to replace terminology.

Learn More About 802.1ASdr-2024

802.1AX-2020
IEEE Standard for Local and Metropolitan Area Networks--Link Aggregation

Link Aggregation allows parallel point-to-point links to be used as if they were a single link and also supports the use of multiple links as a resilient load-sharing interconnect between multiple nodes in two separately administered networks. This standard defines a MAC-independent Link Aggregation capability and provides general information relevant to specific MAC types.

Learn More About 802.1AX-2020

802.1BA-2021
IEEE Standard for Local and Metropolitan Area Networks--Audio Video Bridging (AVB) Systems

Profiles that select features, options, configurations, defaults, protocols, and procedures of bridges, stations, and LANs that are necessary to build networks that are capable of transporting time-sensitive audio and/or video data streams are defined in this standard. The PDF of this standard is available at no cost via the IEEE GET program at https://ieeexplore.ieee.org/browse/standards/get-program/page/series?id=68

Learn More About 802.1BA-2021

802.1CB-2017
IEEE Standard for Local and metropolitan area networks--Frame Replication and Elimination for Reliability

This standard specifies procedures, managed objects, and protocols for bridges and end systems that provide identification and replication of packets for redundant transmission, identification of duplicate packets, and elimination of duplicate packets. It is not concerned with the creation of the multiple paths over which the duplicates are transmitted.

Learn More About 802.1CB-2017

802.1CBcv-2021
IEEE Standard for Local and metropolitan area networks -- Frame Replication and Elimination for Reliability - Amendment 1: Information Model, YANG Data Model, and Management Information Base Module

This amendment specifies YANG data models and MIB modules that allow configuration and status reporting for bridges and end systems with the capabilities for Frame Replication and Elimination for Reliability (FRER) and Stream identification. (The PDf of this standards is available at no cost to your thru the IEEE GET program https://ieeexplore.ieee.org/browse/standards/get-program/page/series?id=68)

Learn More About 802.1CBcv-2021

802.1CBdb-2021
IEEE Standard for Local and metropolitan area networks--Frame Replication and Elimination for Reliability Amendment 2: Extended Stream Identification Functions

This amendment specifies procedures, managed objects, and protocols for bridges and end systems that provide identification and replication of packets for redundant transmission, identification of duplicate packets, and elimination of duplicate packets. It is not concerned with the creation of the multiple paths over which the duplicates are transmitted.

Learn More About 802.1CBdb-2021

802.1CF-2019
IEEE Recommended Practice for Network Reference Model and Functional Description of IEEE 802(R) Access Network

An access network (which connects terminals to their access routers) utilizing technologies based on the family of IEEE 802(R) standards is specified in this recommended practice. An access network reference model (NRM) that includes entities and reference points along with behavioral and functional descriptions of communications among those entities is provided in this recommended practice. (The PDF of this standard is available at no cost to you compliments of the IEEE GET program https://ieeexplore.ieee.org/browse/standards/get-program/page/series?id=68)

Learn More About 802.1CF-2019

802.1CM-2018
IEEE Standard for Local and metropolitan area networks -- Time-Sensitive Networking for Fronthaul

This standard defines profiles that select features, options, configurations, defaults, protocols, and procedures of bridges, stations, and LANs that are necessary to build networks that are capable of transporting fronthaul streams, which are time sensitive. (The PDF of this standard is available at not cost compliments of the IEEE GET Program at https://ieeexplore.ieee.org/browse/standards/get-program/page)

Learn More About 802.1CM-2018

802.1CMde-2020
IEEE Standard for Local and metropolitan area networks -- Time-Sensitive Networking for Fronthaul - Amendment 1: Enhancements to Fronthaul Profiles to Support New Fronthaul Interface, Synchronization, and Syntonization Standards

Enhancements to fronthaul profiles are defined in this amendment to IEEE Std 802.1CM-2018 in order to address new developments in fronthaul interface standards and in related synchronization and syntonization standards. (The PDF of this standard is available at no cost to you compliments of the IEEE GET program https://ieeexplore.ieee.org/browse/standards/get-program/page/series?id=68)

Learn More About 802.1CMde-2020

802.1CS-2020
IEEE Standard for Local and Metropolitan Area Networks--Link-local Registration Protocol

Protocols, procedures, and managed objects for a Link-local Registration Protocol (LRP) to replicate a registration database from one end to the other of a point-to-point link and to replicate changes to parts of that database are specified in this standard. A facility is provided to purge the replicated database if the source becomes unresponsive. LRP is optimized for databases on the order of 1 Mbyte. (The PDF of this standard is available at no cost to you compliments of the IEEE GET program at https://ieeexplore.ieee.org/browse/standards/get-program/page/series?id=68.

Learn More About 802.1CS-2020

802.1CS-2020/Cor 1-2024
IEEE Standard for Local and Metropolitan Area Networks--Link-local Registration Protocol Corrigendum 1: Corrections to Management Modules and Protocol Encoding

This corrigendum corrects errors in the YANG module, SNMP MIBs, and TLV encoding in IEEE Std 802.1CS-2020.

Learn More About 802.1CS-2020/Cor 1-2024

802.1Q-2022
IEEE Standard for Local and Metropolitan Area Networks--Bridges and Bridged Networks

This standard specifies how the Media Access Control (MAC) Service is supported by Bridged Networks, the principles of operation of those networks, and the operation of MAC Bridges and VLAN Bridges, including management, protocols, and algorithms. (The PDF of this standard is available at no cost compliments of the IEEE GET program https://ieeexplore.ieee.org/browse/standards/get-program/page/series?id=68)

Learn More About 802.1Q-2022

802.1Qcj-2023
IEEE Standard for Local and Metropolitan Area Networks--Bridges and Bridged Networks Amendment 37: Automatic Attachment to Provider Backbone Bridging (PBB) Services

This amendment to IEEE Std 802.1Q-2022 as amended by IEEE Std 802.1Qcz-2023 and IEEE Std 802.1Qcw-2023 specifies protocols, procedures, and management objects for auto attachment of network devices to Provider Backbone service instances using Type, Length, Value (TLVs) within the Link Layer Discovery Protocol (LLDP). (PDF of this Standard is available at no charge, compliments of the IEEE GET program at https://ieeexplore.ieee.org/browse/standards/get-program/page/series?id=68).

Learn More About 802.1Qcj-2023

802.1Qcw-2023
IEEE Standard for Local and Metropolitan Area Networks--Bridges and Bridged Networks Amendment 36: YANG Data Models for Scheduled Traffic, Frame Preemption, and Peru2010Stream Filtering and Policing

This amendment specifies YANG data models that allow configuration and status reporting for Bridges and Bridge components with the capabilities of scheduled traffic, frame preemption, and Per-Stream Filtering and Policing. (The PDF of the standard is available at no cost, compliments of the IEEE GET program at https://ieeexplore.ieee.org/browse/standards/get-program/page/series?id=68).

Learn More About 802.1Qcw-2023

802.1Qcz-2023
IEEE Standard for Local and Metropolitan Area Networks--Bridges and Bridged Networks -- Amendment 35: Congestion Isolation

This amendment to IEEE Std 802.1Q™-2022 specifies protocols, procedures, and managed objects that support the isolation of congesting data flows within data center environments. The PDF of this standard is available at no cost compliments of the IEEE GET program https://ieeexplore.ieee.org/browse/standards/get-program/page/series?id=68.

Learn More About 802.1Qcz-2023

802.1Qdj-2024
IEEE Standard for Local and Metropolitan Area Networks--Bridges and Bridged Networks Amendment 38: Configuration Enhancements for Timeu2010Sensitive Networking

This amendment to IEEE Std 802.1Q-2022 as amended by IEEE Std 802.1Qcz-2023, IEEE Std 802.1Qcw-2023, and IEEE Std 802.1Qcj-2023 describes the relationships and division of responsibilities between Centralized User Configuration (CUC) components, that can be used to configure end stations' use of Time-Sensitive Networking (TSN) capabilities, and a Centralized Network Configuration (CNC) component that can be used to configure network resources within an administrative Configuration Domain. A YANG model and modules that can be used by a network configuration protocol, such as NETCONF, to provide communication between the CNC and a CUC is specified.

Learn More About 802.1Qdj-2024

802.1Qdx-2024
IEEE Approved Draft Standard for Local and Metropolitan Area Networks--Bridges and Bridged Networks Amendment 39: YANG Data Models for the Credit-Based Shaper

This amendment to IEEE Std 802.1Q-2022 as amended by IEEE Std 802.1Qcz-2023, IEEE Std 802.1Qcw-2023, and IEEE Std 802.1Qcj-2023 specifies a YANG data model that supports configuration and status reporting for credit-based shaper algorithm capabilities in bridges and end stations.

Learn More About 802.1Qdx-2024

802.1X-2020
IEEE Standard for Local and Metropolitan Area Networks--Port-Based Network Access Control

Port-based network access control allows a network administrator to restrict the use of IEEE 802(R) LAN service access points (ports) to secure communication between authenticated and authorized devices. This standard specifies a common architecture, functional elements, and protocols that support mutual authentication between the clients of ports attached to the same LAN and that secure communication between the ports, including the media access method independent protocols that are used to discover and establish the security associations used by IEEE 802.1AE(TM) MAC Security.

Learn More About 802.1X-2020

802c-2017
IEEE Standard for Local and Metropolitan Area Networks:Overview and Architecture--Amendment 2: Local Medium Access Control (MAC) Address Usage

An optional local medium access control (MAC) address space structure, known as the Structured Local Address Plan (SLAP), is provided in this amendment to IEEE Std 802u00ae-2014 in order to allow multiple administrations to coexist. This structure designates a range of local MAC addresses for protocols using a Company ID (CID) assigned by the IEEE Registration Authority. Another range of local MAC addresses is designated for assignment by administrators. The amendment recommends a range of local MAC addresses for use by IEEE 802u00ae protocols.(The PDF of this standard is available at no cost to you compliments of the IEEE GET program http://ieeexplore.ieee.org/servlet/opac?punumber=8016707.

Learn More About 802c-2017

802d-2017
IEEE Standard for Local and Metropolitan Area Networks: Overview and Architecture Amendment 1: Allocation of Uniform Resource Name (URN) Values in IEEE 802(R) Standards

How Uniform Resource Name (URN) values are allocated in IEEE 802(R) standards is described in this amendment to IEEE Std 802(R)-2014. (The PDF of this standard is available at no cost compliments of the IEEE GET program at http://ieeexplore.ieee.org/browse/standards/get-program/page/)

Learn More About 802d-2017

802E-2020
IEEE Recommended Practice for Privacy Considerations for IEEE 802(R) Technologies

A privacy threat model for IEEE 802u00ae technologies is specified by this recommended practice. The document also provides recommendations on how to protect against privacy threats and promotes a consistent approach to the mitigation of privacy threats by IEEE 802 protocol developers.

Learn More About 802E-2020

802f-2023
IEEE Standard for Local and Metropolitan Area Network: Overview and Architecture Amendment 3: YANG Data Model for EtherTypes

The YANG module containing the EtherType information, including a compact humanreadable name and description, for a subset of EtherTypes taken from the IEEE Registration Authority EtherType public listing is specified in this amendment. This amendment also addresses errors and omissions in IEEE Std 802 description of existing functionality. (The PDF of the standard is available at no cost at http://ieeexplore.ieee.org/servlet/opac?punumber=10352373 compliments of the IEEE GET program)

Learn More About 802f-2023

8802-1AB
ISO/IEC/IEEE Draft International Standard - Information technology – Telecommunications and information exchange between systems – Local and metropolitan area networks – Specific requirements – Part 1AB: Station and media access control connectivity discovery

A protocol and a set of managed objects that can be used for discovering the physical topology from adjacent stations in IEEE 802u00ae LANs are defined in this document

Learn More About 8802-1AB

8802-1AB-2017
ISO/IEC/IEEE International Standard--Information technology--Telecommunications and information exchange between systems--Local and metropolitan area networks--Specific requirements--Part 1AB: Station and media access control connectivity discovery

A protocol and a set of managed objects that can be used for discovering the physical topology from adjacent stations in IEEE 802u00ae LANs are defined in this document.

Learn More About 8802-1AB-2017

8802-1AB:2017/Amd 1-2023
IEEE/ISO/IEC International Standard--Information technology--Telecommunications and information exchange between systems--Local and metropolitan area networks--Specific requirements--Part 1AB: Station and media access control connectivity discovery AMENDMENT 1: YANG data model

This amendment to IEEE Std 802.1AB-2016 specifies a Unified Modeling Language (UML)-based information model and a YANG data model that allows configuration and status reporting for bridges and bridge components with regards to topology discovery.

Learn More About 8802-1AB:2017/Amd 1-2023

8802-1AB:2017/Amd 2-2023
IEEE/ISO/IEC International Standard--Information technology--Telecommunications and information exchange between systems--Local and metropolitan area networks--Specific requirements--Part 1AB: Station and media access control connectivity discovery AMENDMENT 2: Support for multiframe protocol data units

Abstract: This amendment to IEEE Std 802.1AB™-2016 specifies protocols, procedures, and managed objects that support the transmission and reception of a set of Link Layer Discovery Protocol (LLDP) Type/Length/Values (TLVs) that exceed the space available in a single frame.

Learn More About 8802-1AB:2017/Amd 2-2023

8802-1AC:2018/Amd 1-2023
ISO/IEC/IEEE International Standard - Information technology -- Telecommunications and information exchange between systems -- Local and metropolitan area networks -- Part 1AC: Media access control (MAC) service definition AMENDMENT 1: Support for ISO/IEC/ IEEE 8802-15-3

The Internal Sublayer Service for the IEEE 802.15.3 MAC entity is defined in this amendment.

Learn More About 8802-1AC:2018/Amd 1-2023

8802-1AE/Cor1-2021-2020
IEEE/ISO/IEC International Standard - Telecommunications and exchange between information technology systems--Requirements for local and metropolitan area networks--Part 1AE:Media access control (MAC) security

How all or part of a network can be secured transparently to peer protocol entities that use the MAC Service provided by IEEE 802u00ae LANs to communicate is specified in this standard. MAC security (MACsec) provides connectionless user data confidentiality, frame data integrity, and data origin authenticity.

Learn More About 8802-1AE/Cor1-2021-2020

8802-1AS-2021
IEEE/ISO/IEC International Standard for Information technology--Telecommunications and information exchange between systems--Local and metropolitan area networks--Part 1AS:Timing and synchronization for time-sensitive applications in bridged local area networks

Protocols, procedures, and managed objects for the transport of timing over local area networks are defined in this standard. It includes the transport of synchronized time, the selection of the timing source (i.e., best master), and the indication of the occurrence and magnitude of timing impairments (i.e., phase and frequency discontinuities).

Learn More About 8802-1AS-2021

8802-1AS:2021/Cor 1-2023
ISO/IEC/IEEE--Information technology--Telecommunications and information exchange between systems--Local and metropolitan area networks--Part 1AS: Timing and synchronization for time-sensitive applications in bridged local area networks TECHNICAL CORRIGENDUM 1: Technical and editorial corrections

Technical and editorial corrections to IEEE Std 802.1AS-2020 are provided in this corrigendum.

Learn More About 8802-1AS:2021/Cor 1-2023

8802-1AX-2021
IEEE/ISO/IEC International Standard - Telecommunications and exchange between information technology systems -- Requirements for local and metropolitan area networks -- Part 1AX: Link aggregation

Link Aggregation allows parallel point-to-point links to be used as if they were a single link and also supports the use of multiple links as a resilient load-sharing interconnect between multiple nodes in two separately administered networks. This standard defines a MAC-independent Link Aggregation capability and provides general information relevant to specific MAC types.

Learn More About 8802-1AX-2021

8802-1BA-2023
ISO/IEC/IEEE International Standard--Information technology -- Telecommunications and information exchange between systems -- Local and metropolitan area networks -- Specific requirements -- Part 1BA: Audio video bridging (AVB) systems

Profiles that select features, options, configurations, defaults, protocols, and procedures of bridges, stations, and LANs that are necessary to build networks that are capable of transporting time-sensitive audio and/or video data streams are defined in this standard.

Learn More About 8802-1BA-2023

8802-1BR-2016
ISO/IEC/IEEE International Standard for Information technology – Telecommunications and information exchange between systems – Local and metropolitan area networks – Specific requirements – Part 1BR: Virtual bridged local area networks – Bridge port extension

This standard specifies the operation of Bridge Port Extenders, including management, protocols, and algorithms. Bridge Port Extenders operate in support of the MAC Service by Extended Bridges.

Learn More About 8802-1BR-2016

8802-1CB:2019/Amd 2-2023
IEEE/ISO/IEC International Standard--Information technology--Telecommunications and information exchange between systems--Local and metropolitan area networks--Specific requirements--Part 1CB: Frame replication and elimination for reliability AMENDMENT 2: Extend stream identification functions

This amendment specifies procedures, managed objects, and protocols for bridges and end systems that provide identification and replication of packets for redundant transmission, identification of duplicate packets, and elimination of duplicate packets. It is not concerned with the creation of the multiple paths over which the duplicates are transmitted.

Learn More About 8802-1CB:2019/Amd 2-2023

8802-1CM:2019/Amd1-2021
IEEE/ISO/IEC International Standard-Telecommunications and information exchange between information technology systems--Requirements for local and metropolitan area networks--Part 1CM:Time-sensitive networking for fronthaul - AMENDMENT 1: Enhancements to fronthaul profiles to support new fronthaul interface, synchronization, and syntonization standards

Enhancements to fronthaul profiles are defined in this amendment to IEEE Std 802.1CM(TM)-2018 in order to address new developments in fronthaul interface standards and in related synchronization and syntonization standards.

Learn More About 8802-1CM:2019/Amd1-2021

8802-1CS-2021
ISO/IEC/IEEE International Standard--Telecommunications and exchange between information technology systems--Requirements for local and metropolitan area networks--Part 1CS: Link-local registration protocol

Protocols, procedures, and managed objects for a Link-local Registration Protocol (LRP) to replicate a registration database from one end to the other of a point-to-point link and to replicate changes to parts of that database are specified in this standard. A facility is provided to purge the replicated database if the source becomes unresponsive. LRP is optimized for databases on the order of 1 Mbyte.

Learn More About 8802-1CS-2021

8802-1Q-2020
IEEE/ISO/IEC International Standard - Telecommunications and exchange between information technology systems--Requirements for local and metropolitan area networks--Part 1Q: Bridges and bridged networks

This standard specifies how the Media Access Control (MAC) Service is supported by Bridged Networks, the principles of operation of those networks, and the operation of MAC Bridges and VLAN Bridges, including management, protocols, and algorithms.

Learn More About 8802-1Q-2020

8802-1Q-2020/Amd3-2021
ISO/IEC/IEEE International Standard-Telecommunications and exchange between information technology systems -- Requirements for local and metropolitan area networks -- Part 1Q: Bridges and bridged networks AMENDMENT 3: Virtual station interface (VSI) discovery and configuration protocol (VDP) extension to support network virtualization overlays over layer 3 (NVO3)

Extensions to the Virtual Station Interface (VSI) Discovery and Configuration Protocol (VDP) to support using the protocol between an end station and a device doing encapsulation/decapsulation for Network Virtualization Overlays Over Layer 3 (NVO3) are specified in this amendment to IEEE Std 802.1Q-2018. The extensions include adding format types [e.g., Internet Protocol (IP) addresses] and enhancing indication of migration events.

Learn More About 8802-1Q-2020/Amd3-2021

8802-1Q-2020/Amd31-2021
IEEE/ISO/IEC International Standard-Telecommunications and exchange between information technology systems -- Requirements for local and metropolitan area networks -- Part 1Q: Bridges and bridged networks AMENDMENT 31: Stream Reservation Protocol (SRP) enhancements and performance improvements

Enhancements to the configuration of time-sensitive streams are provided by this amendment to IEEE Std 8802.1Q-2018.

Learn More About 8802-1Q-2020/Amd31-2021

8802-1Q-2020_Amd2-2021
IEEE/ISO/IEC International Standard -Telecommunications and exchange between information technology systems -- Requirements for local and metropolitan area networks--Part 1Q: Bridges and bridged networks AMENDMENT 2: YANG data model

A YANG data model in support of configuration and operational status information for a subset of Bridging capabilities is provided in this amendment to IEEE Std 802.1Q(TM)-2018.

Learn More About 8802-1Q-2020_Amd2-2021

8802-1Q:2016/Cor 1-2017
ISO/IEC/IEEE International Standard-Information technology--Telecommunications and information exchange between systems--Local and metropolitan area networks--Specific requirements--Part 1Q: Bridges and bridged networks TECHNICAL CORRIGENDUM 1: Technical and editorial corrections

Correction of technical and editorial errors identified by the IEEE 802.1 maintenance activity are presented in this document.

Learn More About 8802-1Q:2016/Cor 1-2017

8802-1Q_Amd 1-2017
ISO/IEC/IEEE International Standard -- Information technology -- Telecommunications and information exchange between systems -- Local and metropolitan area networks -- Specific requirements -- Part 1Q: Bridges and bridged networks AMENDMENT 1: Path control and reservation

Explicit path control, bandwidth reservation, and redundancy (protection, restoration) for data flows are specified in this amendment to IEEE Std 802.1Q-2014.

Learn More About 8802-1Q_Amd 1-2017

8802-1Q_Amd 3
ISO/IEC/IEEE International Standard -- Information technology -- Telecommunications and information exchange between systems -- Local and metropolitan area networks -- Specific requirements -- Part 1Q: Bridges and bridged networks AMENDMENT 3: Enhancements for scheduled traffic

Enhancements to the forwarding process that supports scheduled traffic is provided in this amendment to IEEE Std 802.1Q-2014.

Learn More About 8802-1Q_Amd 3

8802-1X-2021
IEEE/ISO/IEC International Standard-Telecommunications and exchange between information technology systems--Requirements for local and metropolitan area networks--Part 1X:Port-based network access control

Port-based network access control allows a network administrator to restrict the use of IEEE 802(R) LAN service access points (ports) to secure communication between authenticated and authorized devices. This standard specifies a common architecture, functional elements, and protocols that support mutual authentication between the clients of ports attached to the same LAN and that secure communication between the ports, including the media access method independent protocols that are used to discover and establish the security associations used by IEEE 802.1AE(TM) MAC Security.

Learn More About 8802-1X-2021

These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.


802-1990
Local and Metropolitan Area Networks: IEEE Standard: Overview and Architecture

Superseded by IEEE Std 802-2001 This IEEE Standards product is part of the 802 family on LAN/MAN. This document provides an overview to the family of IEEE 802 Standards, defines compliance with the family of IEEE 802 Standards, describes the relationship of the IEEE 802 Standards to the Open Systems Interconnections Basic Reference Model [ISO 7498:1984] and explains the relationship of these standards to the higher layer protocols, and provides a standard for identification of public, private, and standard protocols.

Learn More About 802-1990

802-2001
IEEE Standard for Local and Metropolitan Area Networks: Overview and Architecture

IEEE Std 802-2001, IEEE Standards for Local and Metropolitan Area Networks: Overview and Architecture, provides an overview to the family of IEEE 802 Standards. It defines compliance with the family of IEEE 802 Standards; it describes the relationship of the IEEE 802 Standards to the Open Systems Interconnection Basic Reference Model [ISO/IEC 7498-1:1994] and explains the relationship of these standards to the higher layer protocols; it provides a standard for the structure of LAN MAC addresses; and it provides a standard for identification of public, private, and standard protocols.

Learn More About 802-2001

802.1AB-2005
IEEE Standard for Local and metropolitan area networks -- Station and Media Access Control Connectivity Discovery

This document defines a protocol and a set of managed objects that can be used for discovering the physical topology from adjacent stations in 802 LANs.

Learn More About 802.1AB-2005

802.1AB-2009
IEEE Standard for Local and Metropolitan Area Networks-- Station and Media Access Control Connectivity Discovery

This document defines a protocol and a set of managed objects that can be used for discovering the physical topology from adjacent stations in IEEE 802 LANs.

Learn More About 802.1AB-2009

802.1AB-2009/Cor 1-2013
IEEE Standard for Local and metropolitan area networks--Station and Media Access Control Connectivity Discovery Corrigendum 1: Technical and Editorial Corrections

Technical and editorial errors identified by the IEEE 802.1 Working Group's maintenance activity are corrected by this corrigendum.

Learn More About 802.1AB-2009/Cor 1-2013

802.1AB-2009/Cor 2-2015
IEEE Standard for Local and metropolitan area networks-- Station and Media Access Control Connectivity Discovery Corrigendum 2: Technical and Editorial Corrections

Technical and editorial errors identified by the IEEE 802.1 Working Group's maintenance activity are corrected by this corrigendum to IEEE 802.1AB(TM)-2009.

Learn More About 802.1AB-2009/Cor 2-2015

802.1AC-2012
IEEE Standard for Local and metropolitan area networks-Media Access Control (MAC) Service Definition

The MAC service provided by all IEEE 802(R) MACs along with the Internal Sublayer Service (ISS) that is provided by IEEE 802 MACs to the relay function of a Media Access Control(MAC) Bridge are defined in this standard.

Learn More About 802.1AC-2012

802.1ad-2005
IEEE Standard for Local and Metropolitan Area Networks---Virtual Bridged Local Area Networks---Amendment 4: Provider Bridges

This amendment enables a service provider to use the architecture and protocols of IEEE Std 802.1Q to offer the equivalent of separate LANs, Bridged Local Area Networks, or Virtual Bridged Local Area Networks to a number of customers, while requiring no cooperation between the customers, and minimal cooperation between each customer and the service provider.

Learn More About 802.1ad-2005

802.1AE-2006
IEEE Standard for Local and Metropolitan Area Networks: Media Access Control (MAC) Security

This standard specifies how all or part of a network can be secured transparently to peer protocol entities that use the MAC Service provided by IEEE 802u00ae LANs to communicate. MAC security (MACsec) provides connectionless user data confidentiality, frame data integrity, and data origin authenticity.

Learn More About 802.1AE-2006

802.1AEbn-2011
IEEE Standard for Local and metropolitan area networks--Media Access Control (MAC) Security Amendment 1: Galois Counter Mode--Advanced Encryption Standard-- 256 (GCM-AES-256) Cipher Suite

This amendment specifies the GCM-AES-256 Cipher Suite as an option in addition to the existing mandatory to implement Default Cipher Suite, GCM-AES-128.

Learn More About 802.1AEbn-2011

802.1AEbw-2013
IEEE Standard for Local and metropolitan area networks--Media Access Control (MAC) Security Amendment 2: Extended Packet Numbering

The optional use of Cipher Suites that make use of a 64-bit (PN) to allow more than 232 MACsec protected frames to be sent with a single Secure Association Key are specified by this amendment.

Learn More About 802.1AEbw-2013

802.1AEcg-2017
IEEE Standard for Local and metropolitan area networks--Media Access Control (MAC) Security - Amendment 3: Ethernet Data Encryption devices

Ethernet Data Encryption devices (EDEs) are specified in this amendment. An EDE is a two-port bridge that uses MACsec to provide secure connectivity for attached customer bridges, or for attached provider bridges. EDEs may allow the customer (or provider) bridges to continue to use a VLAN Identifier (VID) in transmitted frames to select

Learn More About 802.1AEcg-2017

802.1ag-2007
IEEE Standard for Local and Metropolitan Area Networks Virtual Bridged Local Area Networks Amendment 5: Connectivity Fault Management

This amendment specifies protocols, procedures, and managed objects to support connectivity fault management. These allow discovery and verification of the path, through bridges and LANs, taken for frames addressed to and from specified network users. Connectivity faults can be detected and isolated to an individual bridge or LAN.

Learn More About 802.1ag-2007

802.1ah-2008
IEEE Standard for Local and metropolitan area networks -- Virtual Bridged Local Area Networks Amendment 7: Provider Backbone Bridges

This amendment defines an architecture and bridge protocols for interconnection of multiple Provider Bridged Networks, allowing a Provider to support up tot 2^20 service instances.

Learn More About 802.1ah-2008

802.1aj-2009
IEEE Standard for Local and Metropolitan Area Networks--Virtual Bridged Local Area Networks Amendment 11: Two-Port Media Access Control (Mac) Relay

This amendment to IEEE Std 802.1Q specifies the function of a MAC Relay with two MACs, and the protocols and procedures to support its operation. A MAC Relay is transparent to all frame-based media independent protocols except those explicitly addressed to this device. It is remotely manageable through at least one of its external MACs, and signals a failure of either MAC's LAN through the other MAC.

Learn More About 802.1aj-2009

802.1ak-2007
IEEE Standard for Local and Metropolitan Area Networks - Virtual Bridged Local Area Networks - Amendment 07: Multiple Registration Protocol

This amendment specifies a set of protocols that replaces the GARP, GMRP, and GVRP protocols specified in earlier versions of IEEE Std 802.1Q.

Learn More About 802.1ak-2007

802.1ap-2008
IEEE Standard for Local and Metropolitan Area Networks -- Virtual Bridged Local Area Networks - Amendment 8: Management Information Base (MIB) Definitions for VLAN Bridges

This amendment includes management information base (MIB) definitions in IEEE Std 802.1Q.

Learn More About 802.1ap-2008

802.1aq-2012
IEEE Standard for Local and metropolitan area networks--Media Access Control (MAC) Bridges and Virtual Bridged Local Area Networks--Amendment 20: Shortest Path Bridging

This amendment to IEEE Std 802.1Q-2011 specifies shortest path bridging of unicast and multicast frames, including protocols to calculate multiple active topologies that can share learned station information, and support of a virtual local area network (VLAN) by multiple, per topology VLAN identifiers (VIDs). (Additional downloads for this standard are attached or can be downloaded at http://standards.ieee.org/downloads/802.1/index.html)

Learn More About 802.1aq-2012

802.1AR-2009
IEEE Standard for Local and metropolitan area networks - Secure Device Identity

A secure device identifier (DevID) is cryptographically bound to a device and supports authentication of the device's identity. Locally significant identities can be securely associated with an initial manufacturer-provisioned DevID and used in provisioning and authentication protocols to allow a network administrator to establish the trustworthiness of a device and select appropriate policies for transmission and reception of data and control protocols to and from the device.

Learn More About 802.1AR-2009

802.1AS-2011
IEEE Standard for Local and Metropolitan Area Networks - Timing and Synchronization for Time-Sensitive Applications in Bridged Local Area Networks

This standard defines a protocol and procedures for the transport of timing over bridged and virtual bridged local area networks. It includes the transport of synchronized time, the selection of the timing source (i.e., best master), and the indication of the occurrence and magnitude of timing impairments (i.e., phase and frequency discontinuities).

Learn More About 802.1AS-2011

802.1AS-2011/Cor 1-2013
IEEE Standard for Local and metropolitan area networks– Timing and Synchronization for Time-Sensitive Applications in Bridged Local Area Networks– Corrigendum 1: Technical and Editorial Corrections

This corrigendum to IEEE Std 802.1AS - 2011 corrects minor errors, bugs, ambiguities, and inconsistencies that were missed when the document was balloted. It does not contain new material.

Learn More About 802.1AS-2011/Cor 1-2013

802.1AS-2011/Cor 2-2015
IEEE Standard for Local and metropolitan area networks-- Timing and Synchronization for Time-Sensitive Applications in Bridged Local Area Networks-- Corrigendum 2: Technical and Editorial Corrections

Technical and editorial corrections are provided by this corrigendum to IEEE Std 802.1AS.

Learn More About 802.1AS-2011/Cor 2-2015

802.1AX-2008
IEEE Standard for Local and metropolitan area networks--Link Aggregation

Link Aggregation allows one or more links to be aggregated together to form a Link Aggregation Group, such that a Media Access Control (MAC) Client can treat the Link Aggregation Group as if it were a single link. To this end, it specifies the establishment of data terminal equipu00adment (DTE) to DTE logical links, consisting of N parallel instances of full duplex point-to-point links operating at the same data rate. This standard defines the MAC independent Link Aggregation capability, and general information relevant to specific MAC types that support link aggregation.

Learn More About 802.1AX-2008

802.1AX-2014
IEEE Standard for Local and metropolitan area networks -- Link Aggregation

MAC-independent Link Aggregation capability and general information relevant to specific MAC types are defined in this standard. Link Aggregation allows parallel full-duplex point-to-point links to be used as if they were a single link and also supports the use of multiple links as a resilient load sharing interconnect between multiple nodes in two separately administered networks. (The PDF of this standard is available at no cost compliments of the IEEE GET program. Additional downloads are attached or can be downloaded at https://ieeexplore.ieee.org/browse/standards/get-program/page)

Learn More About 802.1AX-2014

802.1AX-2014/Cor 1-2017
IEEE Standard for Local and metropolitan area networks -- Link Aggregation -- Corrigendum 1: Technical and editorial corrections

Technical and editorial corrections are provided in this corrigendum to IEEE Std 802.1AX-2014.

Learn More About 802.1AX-2014/Cor 1-2017

802.1AXbk-2012
IEEE Standard for Local and metropolitan area networks--Link Aggregation Amendment 1: Protocol Addressing

Link Aggregation allows one or more links to be aggregated together to form a Link Aggregation Group, such that a Media Access Control (MAC) Client can treat the Link Aggregation Group as if it were a single link. To this end, it specifies the establishment of data terminal equipment (DTE) to DTE logical links, consisting of N parallel instances of full-duplex, point-to-point links operating at the same data rate. The MAC independent Link Aggregation capability, and general information relevant to specific MAC types that support Link Aggregation, are defined in this standard.

Learn More About 802.1AXbk-2012

802.1BA-2011
IEEE Standard for Local and metropolitan area networks--Audio Video Bridging (AVB) Systems

Profiles that select features, options, configurations, defaults, protocols and procedures of bridges, stations and LANs that are necessary to build networks that are capable of transporting time-sensitive audio and/or video data streams are defined in this standard. (This PDF of this standard is available as part of the IEEE Get program. Through the IEEE SA and industry support, select IEEE standards are available for download at no charge. For more details go to our web page at https://ieeexplore.ieee.org/browse/standards/get-program/page.)

Learn More About 802.1BA-2011

802.1BA-2011/Cor 1-2016
IEEE Standard for Local and metropolitan area networks-- Audio Video Bridging (AVB) Systems-- Corrigendum 1: Technical and Editorial Corrections

Technical and editorial errors identified by the IEEE 802.1 Working Group's maintenance activity are corrected in this corrigendum to IEEE Std 802.1BA-2011.

Learn More About 802.1BA-2011/Cor 1-2016

802.1D-2004
IEEE Standard for Local and metropolitan area networks: Media Access Control (MAC) Bridges

An architecture for the interconnection of IEEE 802(R) Local Area Networks (LANs) below the MAC Service boundary is defined. MAC Bridges, as specified by this standard, allow communications between end stations attached to separate LANs, each with its own separate MAC, to be transparent to logical link control (LLC) and network layer protocols, just as if the stations were attached to the same LAN.

Learn More About 802.1D-2004

802.1Q-1998
IEEE Standards for Local and Metropolitan Area Networks: Virtual Bridged Local Area Networks

This IEEE Standards product is part of the 802 family on LAN/MAN. This standard defines an architecture for Virtual Bridged LANs, the services provided in Virtual Bridged LANs, and the protocols and algorithms involved in the provision of those services.

Learn More About 802.1Q-1998

802.1Q-2005
IEEE Standard for Local and Metropolitan Area Networks---Virtual Bridged Local Area Networks

This standard specifies how the MAC Service is supported by Virtual Bridged Local Area Networks, the principles of operation of those networks, and the operation of VLAN-aware Bridges, including management, protocols, and algorithms.

Learn More About 802.1Q-2005

802.1Q-2011
IEEE Standard for Local and metropolitan area networks--Media Access Control (MAC) Bridges and Virtual Bridged Local Area Networks

This standard specifies how the MAC Service is supported by Virtual Bridged Local Area Networks, the principles of operation of those networks, and the operation of VLAN-aware Bridges, including management, protocols, and algorithms. Incorporates IEEE Std 802.1Q-2005, IEEE Std 802.1ad-2005, IEEE Std 802.1ak-2007, IEEE Std 802.1ag-2007, IEEE Std 802.1ah-2008, IEEE Std 802-1Q-2005/Cor-1-2008, IEEE Std 802.1ap-2008, IEEE Std 802.1Qaw-2009, IEEE Std 802.1Qay-2009, IEEE Std 802.1aj-2009, IEEE Std 802.1Qav-2009, IEEE Std Qau-2010, and IEEE Std Qat-2010.

Learn More About 802.1Q-2011

802.1Q-2014
IEEE Standard for Local and metropolitan area networks--Bridges and Bridged Networks

This standard specifies how the Media Access Control (MAC) Service is supported by Bridged Networks, the principles of operation of those networks, and the operation of MAC Bridges and VLAN Bridges, including management, protocols, and algorithms. This revision includes the following amendments and corrigenda: IEEE 802.1Qbe-2011 IEEE 802.1Qbc-2011 IEEE 802.1Qbb-2011 IEEE 802.1Qaz-2011 IEEE 802.1Qbf-2011 IEEE 802.1Qbg-2012 IEEE 802.1aq-2012 IEEE 802.1Q-2011/Cor 2-2012 IEEE 802.1Qbp-2014./index.html. It also supersedes IEEE 802.1D-2004.

Learn More About 802.1Q-2014

802.1Q-2018
IEEE Standard for Local and Metropolitan Area Networks–Bridges and Bridged Networks

This standard specifies how the Media Access Control (MAC) Service is supported by Bridged Networks, the principles of operation of those networks, and the operation of MAC Bridges and VLAN Bridges, including management, protocols, and algorithms. Supersedes 802.1Q™-2014. IEEE 802.1Qcd™-2015, IEEE 802.1Qca™-2015,IEEE 802.1Q™-2014_Cor-1-2015, IEEE 802.1Qbv™-2015, IEEE 802.1Qbu™-2016, IEEE 802.1Qbz™-2016, IEEE 802.1Qci™-2017 and IEEE 802.1Qch™-2017.

Learn More About 802.1Q-2018

802.1Q, 2003 Edition-2003
IEEE Standards for Local and Metropolitan Area Networks: Virtual Bridged Local Area Networks

This standard defines an architecture for Virtual Bridged LANs, the services provided in Virtual Bridged LANs, and the protocols and algorithms involved in the provision of those services. (Incorporates IEEE Std 802.1Q-1998, IEEE Std 802.1u-2001, IEEE Std 802.1v-2001, and IEEE Std 802.1s-2002)

Learn More About 802.1Q, 2003 Edition-2003

802.1Q-2005/Cor 1-2008
IEEE Standard for Local and Metropolitan Area Networks - Virtual Bridged Local Area Networks - Corrigendum 1: Corrections to the Multiple Registration Protocol

This corrigendum to IEEE Std 802.1Q corrects errors in the MRP protocol specification.

Learn More About 802.1Q-2005/Cor 1-2008

802.1Q-2011/Cor 2-2012
IEEE Standard for Local and metropolitan area networks--Media Access Control (MAC) Bridges and Virtual Bridged Local Area Networks--Corrigendum 2: Technical and editorial corrections

This corrigendum to IEEE Std 802.1Q-2011 corrects technical and editorial errors identified by the IEEE 802.1 Working Group's maintenance activity.

Learn More About 802.1Q-2011/Cor 2-2012

802.1Q-2014/Cor 1-2015
IEEE Standard for Local and metropolitan area networks--Bridges and Bridged Networks--Corrigendum 1: Technical and editorial corrections

Correction of technical and editorial errors identified by the IEEE 802.1 maintenance activity are presented in this document.

Learn More About 802.1Q-2014/Cor 1-2015

802.1Qat-2010
IEEE Standard for Local and metropolitan area networks--Virtual Bridged Local Area Networks Amendment 14: Stream Reservation Protocol (SRP)

This amendment specifies protocols, procedures, and managed objects, usable by existing higher layer mechanisms, that allow network resources to be reserved for specific traffic streams traversing a bridged local area network. (The PDF of this standard is available at not cost compliments of the GETIEEE802 program located at https://ieeexplore.ieee.org/browse/standards/get-program/page)

Learn More About 802.1Qat-2010

802.1Qau-2010
IEEE Standard for Local and Metropolitan Area Networks-- Virtual Bridged Local Area Networks Amendment 13: Congestion Notification

This amendment specifies protocols, procedures and managed objects that support congestion management of long-lived data flows within network domains of limited bandwidth-delay product. This is achieved by enabling bridges to signal congestion to end stations capable of transmission rate limiting to avoid frame loss.

Learn More About 802.1Qau-2010

802.1Qav-2009
IEEE Standard for Local and metropolitan area networks-- Virtual Bridged Local Area Networks Amendment 12: Forwarding and Queuing Enhancements for Time-Sensitive Streams

This amendment to IEEE Std 802.1Q defines enhancements to the forwarding and queueing functions of a VLAN Bridge to support the transmission of time sensitive data streams.

Learn More About 802.1Qav-2009

802.1Qaw-2009
IEEE Standard for Local and metropolitan area networks-- Virtual Bridged Local Area Networks Amendment 9: Management of Data Driven and Data Dependent Connectivity Faults

This amendment extends the connectivity fault management capabilities introduced in IEEE Std 802.1ag-2007 to include tools to facilitate diagnosis and isolation of faults sensitive to, or caused by, particular data patterns in frames transmitted by a service user.

Learn More About 802.1Qaw-2009

802.1Qay-2009
IEEE Standard for Local and metropolitan area networks-- Virtual Bridged Local Area Networks Amendment 10: Provider Backbone Bridge Traffic Engineering

This amendment specifies changes to IEEE Std 802.1Q-2005, as amended by IEEE Std 802.1ad-2005, IEEE Std 802.1ag-2007, IEEE Std 802.1ak-2007, IEEE Std 802.1ah-2008, and IEEE Std 802.1ap-2008, that support provisioning systems that explicitly select traffic engineered paths within Provider Backbone Bridged Networks. Changes are applied to the base text of IEEE Std 802.1Q-2005 as amended by IEEE Std 802.1ad-2005, IEEE Std 802.1ak-2007, IEEE Std 802.1ag-2007, IEEE Std 802.1ah-2008, and IEEE Std 802.1ap-2008.

Learn More About 802.1Qay-2009

802.1Qaz-2011
IEEE Standard for Local and metropolitan area networks--Media Access Control (MAC) Bridges and Virtual Bridged Local Area Networks--Amendment 18: Enhanced Transmission Selection for Bandwidth Sharing Between Traffic Classes

This amendment to IEEE Std 802.1Q-2011 defines enhancements to transmission selection to support allocation of bandwidth amongst traffic classes, plus a protocol for controlling the application of Data Center Bridging features.

Learn More About 802.1Qaz-2011

802.1Qbb-2011
IEEE Standard for Local and metropolitan area networks--Media Access Control (MAC) Bridges and Virtual Bridged Local Area Networks--Amendment 17: Priority-based Flow Control

This amendment to IEEE Std 802.1Q-2011 specifies protocols, procedures, and managed objects that enable flow control per traffic class on IEEE 802(R) point-to-point full duplex links. This is achieved by a mechanism similar to IEEE 802.3 Annex 31B PAUSE, but operating on individual priorities.

Learn More About 802.1Qbb-2011

802.1Qbc-2011
IEEE Standard for Local and metropolitan area networks--Media Access Control (MAC) Bridges and Virtual Bridged Local Area Networks--Amendment 16: Provider Bridging--Remote Customer Service Interfaces

This amendment to IEEE Std 802.1Q-2011 specifies the use of service virtual local area networks (S-VLANs) to provide customer service interfaces in one Provider Bridged Network for customer interface local area networks (LANs) attached to another Provider Bridged Network.

Learn More About 802.1Qbc-2011

802.1Qbe-2011
IEEE Standard for Local and metropolitan area networks--Media Access Control (MAC) Bridges and Virtual Bridged Local Area Networks-- Amendment 15: Multiple I-SID Registration Protocol

This amendment to IEEE Std 802.1Q-2011 specifies protocols, procedures, and managed objects to support topology change signaling to alter the binding (held in an I-Component) of Customer addresses to Backbone addresses on a per-I-SID basis. This is accomplished by extending the use of the Multiple Registration Protocol (MRP).

Learn More About 802.1Qbe-2011

802.1Qbf-2011
IEEE Standard for Local and metropolitan area networks--Media Access Control (MAC) Bridges and Virtual Bridged Local Area Networks--Amendment 19: PBB-TE Infrastructure Segment Protection

This amendment to IEEE Std 802.1Q-2011 specifies localized protection of selected Traffic Engineered Service Instances traversing a common sequence of Provider Network Ports.

Learn More About 802.1Qbf-2011

802.1Qbg-2012
IEEE Standard for Local and metropolitan area networks--Media Access Control (MAC) Bridges and Virtual Bridged Local Area Networks--Amendment 21: Edge Virtual Bridging

This amendment to IEEE Std 802.1Q-2011 specifies protocols, procedures, and managed objects that -- Provide for the discovery, configuration, and control of a pair of direct-attached limited-function Service VLAN (S-VLAN) components to extend the services of a customer bridge to remote ports and enable coexistence of multiple services onstation-resident ports (e.g., embedded bridging). -- Provide for discovery, configuration, and control of a Reflective Relay Service for a bridge port. -- Provide for discovery of, and coordinated configuration of, edge relays (ERs) and other devices that utilize the reflective relay service. -- Provide for dynamic profile-driven port configuration. (Additional files are attached or can be found at http://standards.ieee.org/downloads/802.1/

Learn More About 802.1Qbg-2012

802.1Qbp-2014
IEEE Standard for Local and metropolitan area networks - Media Access Control (MAC) Bridges and Virtual Bridged Local Area Networks - Amendment 22: Equal Cost Multiple Path (ECMP)

Routing algorithms and relay behavior supporting equal cost multipath forwarding in shortest path bridged VLANs are specified in this amendment to IEEE Std 802.1Q.

Learn More About 802.1Qbp-2014

802.1Qbu-2016
IEEE Standard for Local and metropolitan area networks -- Bridges and Bridged Networks -- Amendment 26: Frame Preemption

Enhancements to the forwarding process that support frame preemption are provided in this amendment to IEEE Std 802.1Q-2014.

Learn More About 802.1Qbu-2016

802.1Qbv-2015
IEEE Standard for Local and metropolitan area networks -- Bridges and Bridged Networks - Amendment 25: Enhancements for Scheduled Traffic

Enhancements to the forwarding process that supports scheduled traffic is provided in this amendment to IEEE Std 802.1Q-2014. Additional downloads are attached or can be downloaded at http://standards.ieee.org/downloads/802.1/index.html)

Learn More About 802.1Qbv-2015

802.1Qbz-2016
IEEE Standard for Local and metropolitan area networks–Bridges and Bridged Networks–Amendment 27: Enhancements to Bridging of IEEE 802.11 Media

Protocols, procedures, and managed objects to allow IEEE 802.11 media to provide internal connections within bridged networks, as well as access to bridged networks, are provided in this amendment.

Learn More About 802.1Qbz-2016

802.1Qca-2015
IEEE Standard for Local and metropolitan area networks-- Bridges and Bridged Networks - Amendment 24: Path Control and Reservation

Explicit path control, bandwidth reservation, and redundancy (protection, restoration) for data flows are specified in this amendment to IEEE Std 802.1Q-2014.

Learn More About 802.1Qca-2015

802.1Qcc-2018
IEEE Standard for Local and Metropolitan Area Networks--Bridges and Bridged Networks -- Amendment 31: Stream Reservation Protocol (SRP) Enhancements and Performance Improvements

Enhancements to the configuration of time-sensitive streams are provided by this amendment to IEEE Std 802.1Q-2018.

Learn More About 802.1Qcc-2018

802.1Qcd-2015
IEEE Standard for Local and metropolitan area networks-- Bridges and Bridged Networks - Amendment 23: Application Virtual Local Area Network (VLAN) Type, Length, Value (TLV)

Enhancements to the set of TLVs used by the Data Center Bridging eXchange protocol (DCBX) for the purpose of simplifying the management of networks utilizing Data Center Bridging (DCB) features are defined in this amendment to IEEE Std 802.1Q-2014.

Learn More About 802.1Qcd-2015

802.1Qch-2017
IEEE Standard for Local and metropolitan area networks--Bridges and Bridged Networks--Amendment 29: Cyclic Queuing and Forwarding

The use of traffic scheduling and per-stream filtering and policing to support cyclic queuing and forwarding are described in this amendment to IEEE Std 802.1Q-2014.

Learn More About 802.1Qch-2017

802.1Qci-2017
IEEE Standard for Local and metropolitan area networks--Bridges and Bridged Networks--Amendment 28: Per-Stream Filtering and Policing

Enhancements to the forwarding process that support per-stream filtering and policing are provided in this amendment to IEEE Std 802.1Q-2014.

Learn More About 802.1Qci-2017

802.1Qcp-2018
IEEE Standard for Local and metropolitan area networks--Bridges and Bridged Networks--Amendment 30: YANG Data Model

A YANG data model in support of configuration and operational status information for a subset of Bridging capabilities is provided in this amendment to IEEE Std 802.1Q-2018.

Learn More About 802.1Qcp-2018

802.1Qcr-2020
IEEE Standard for Local and Metropolitan Area Networks--Bridges and Bridged Networks - Amendment 34:Asynchronous Traffic Shaping

Procedures and managed objects for Bridges and end stations to perform Asynchronous Traffic Shaping over full-duplex links with constant bit data rates are specified in this amendment to IEEE Std 802.1Q(TM)-2018.

Learn More About 802.1Qcr-2020

802.1Qcx-2020
IEEE Standard for Local and Metropolitan Area Networks--Bridges and Bridged Networks Amendment 33: YANG Data Model for Connectivity Fault Management

YANG data model that supports configuration, status reporting, and monitoring for Connectivity Fault Management (CFM) for Two-Port MAC Relays, Customer VLAN Bridges, and Provider Bridges is further developed by this amendment to IEEE Std 802.1Q™-2018. See also IEEE Std 802.1Qcp™-2018 for the introduction of this YANG data model.

Learn More About 802.1Qcx-2020

802.1Qcy-2019
IEEE Standard for Local and Metropolitan Area Networks--Bridges and Bridged Networks Amendment 32: Virtual Station Interface (VSI) Discovery and Configuration Protocol (VDP) Extension to Support Network Virtualization Overlays Over Layer 3 (NVO3)

Extensions to the Virtual Station Interface (VSI) Discovery and Configuration Protocol (VDP) to support using the protocol between an end station and a device doing encapsulation/decapsulation for Network Virtualization Overlays Over Layer 3 (NVO3) are specified in this amendment to IEEE Std 802.1Q-2018. The extensions include adding format types [e.g., Internet Protocol (IP) addresses] and enhancing indication of migration events.

Learn More About 802.1Qcy-2019

802.1s-2002
IEEE Standards for Local and Metropolitan Area Networks - Amendment to 802.1Q Virtual Bridged Local Area Networks: Multiple Spanning Trees

This standard extends the architecture, protocols, and algorithms specified in IEEE Std 802.1Q, 1998 Edition, to allow data traffic belonging to different VLANs to be allocated to different spanning trees, while retaining interoperability with bridges conformant to that prior specification.

Learn More About 802.1s-2002

802.1u-2001
IEEE Standard for Virtual Bridged Local Area Networks - Corrigendum 1: Technical and Editorial Corrections

This amendment to IEEE 802.1Q,1998 Edition is intended to document maintenance items identified in the text of IEEE Std 802.1Q, 1998 Edition.IEEE Std 802.1u-2001 identifies any proposed changes to IEEE Std 802.1Q, 1998 Edition that have arisen as a consequence of maintenance activity. The changes are documented in the usual form for an amendment to IEEE 802 standards; i.e., as an explicit set of editing instructions that, if correctly applied to the text of IEEE Std 802.1Q,1998 Edition, will create a corrected document.

Learn More About 802.1u-2001

802.1v-2001
IEEE Standard for Local and metropolitan area networks--Virtual Bridged Local Area Networks -- Amendment 2: VLAN Classification by Protocol and Port

This amendment to IEEE Std 802.1Q,1998 Edition describes enhancements to allow for classification of incoming packets by methods other than source port. Specifically, it defines rules for classification based on data-link layer protocol identification. The document identifies proposed changes to the text of IEEE Std 802.1Q,1998 Edition that have arisen as a consequence of this activity. These are documented in the usual form for amendments to IEEE 802 standards; i.e., as an explicit set of editing instructions that, if correctly applied to the text of IEEE Std 802.1Q,1998 Edition, will create a corrected document.

Learn More About 802.1v-2001

802.1X-2004
IEEE Standard for Local and metropolitan area networks - Port-Based Network Access Control

Revision of IEEE Std 802.1X-2001 Port-based network access control makes use of the physical access characteristics of IEEE 802 Local Area Networks (LAN) infrastructures in order to provide a means of authenticating and authorizing devices attached to a LAN port that has point-to-point connection characteristics, and of preventing access to that port in cases in which the authentication and authorization process fails.

Learn More About 802.1X-2004

802.1X-2010
IEEE Standard for Local and metropolitan area networks--Port-Based Network Access Control

Port-based network access control allows a network administrator to restrict the use of IEEE 802 LAN service access points (ports) to secure communication between authenticated and authorized devices. This standard specifies a common architecture, functional elements, and protocols that support mutual authentication between the clients of ports attached to the same LAN and that secure communication between the ports, including the media access method independent protocols that are used to discover and establish the security associations used by IEEE 802.1AE MAC Security.

Learn More About 802.1X-2010

802.1Xbx-2014
IEEE Standard for Local and metropolitan area networks -- Port-Based Network Access Control Amendment 1: MAC Security Key Agreement Protocol (MKA) Extensions

Media Access Control security (MACsec) Key Agreement protocol (MKA) data elements and procedures that provide additional security and manageability capabilities, including the ability to maintain secure communication while the operation of MKA is suspended, when used in conjunction with MACsec Cipher Suites that support Extended Packet Numbering are added in this amendment.

Learn More About 802.1Xbx-2014

802.1Xck-2018
IEEE Standard for Local and metropolitan area networks - Port-Based Network Access Control Amendment 2: YANG Data Model

The YANG data model specified in this amendment to IEEE Std 802.1X-2010 allows configuration and status reporting for port-based network access control, in the scenarios described in Clause 7 of this standard and Clause 11 of IEEE Std 802.1AE-2018, using the information model previously specified in this standard.

Learn More About 802.1Xck-2018

802a-2003
IEEE Standard for Local and Metropolitan Area Networks: Overview and Architecture - Amendment 1: Ethertypes for Prototype and Vendor-Specific Protocol Development

IEEE Std 802-2001, IEEE Local and Metropolitan Area Networks: Overview and Architecture, provides an overview to the family of IEEE 802 Standards. This amendment to IEEE Std 802 identifies a set of Ethertypes that may be used for prototype and vendor specific use, and defines how the Ethertypes should be used.

Learn More About 802a-2003

802b-2004
IEEE Standard for Local and Metropolitan Area Networks: Overview and Architecture - Amendment 2: Registration of Object Identifiers

IEEE Std 802-2001, IEEE Local and Metropolitan Area Networks: Overview and Architecture, provides an overview to the family of IEEE 802 standards. This amendment to IEEE Std 802-2001 specifies an Object Identifier hierarchy used within IEEE 802 for uniform allocation of Object Identifiers used in IEEE 802 standards.

Learn More About 802b-2004

8802-1BA-2016
ISO/IEC/IEEE International Standard - Information technology – Telecommunications and information exchange between systems – Local and metropolitan area networks – Specific requirements – Part 1BA: Audio video bridging (AVB) systems

Profiles that select features, options, configurations, defaults, protocols and procedures of bridges, stations and LANs that are necessary to build networks that are capable of transporting time-sensitive audio and/or video data streams are defined in this standard.

Learn More About 8802-1BA-2016

8802-1Q-2016
ISO/IEC/IEEE International Standard - Information technology -- Telecommunications and information exchange between systems -- Local and metropolitan area networks -- Specific requirements -- Part 1Q: Bridges and bridged networks

This international standard specifies how the Media Access Control (MAC) Service is supported by Bridged Networks, the principles of operation of those networks, and the operation of MAC Bridges and VLAN Bridges, including management, protocols, and algorithms

Learn More About 8802-1Q-2016

These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.


802.1F-1993
IEEE Standards for Local and Metropolitan Area Networks: Common Definitions and Procedures for IEEE 802 Management Information

Management information and procedures applicable across the entire family of IEEE 802 LAN/MAN standards within the architectural framework for LAN/MAN Management specified in IEEE Std 802-1990 are identified. Common management information, such as attributes to represent MAC address and managed objects to represent configurable gauges, are specified. The need of developers of LAN/MAN management specifications for common procedures to develop, describe, and register management information is addressed.

Learn More About 802.1F-1993

802.1H-1995
IEEE Standards for Local and Metropolitan Area Networks: Recommended Practice for Media Access Control (MAC) Bridging of Ethernet V2.0 in IEEE 802 Local Area Networks

Administratively withdrawn January 2011. Extensions to the behavior of ISO/IEC 10038 (IEEE 802.1D) media access control (MAC) Bridges, in order to facilitate interoperability in bridged local area networks (LANs) comprising CSMA/CD networks interconnected with other types of LAN using MAC Bridges, where the CSMA/CD networks contain a mixture of ISO/IEC 8802-3 and Ethernet V2.0 end stations, are specified. Additionally, guidelines are provided for the development of nonstandard 802 protocols, with particular emphasis on conversion of existing Ethernet protocols and the behavior to be expected from a Bridge, for the purpose of avoiding future incompatibilities.

Learn More About 802.1H-1995

These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.


802.1BR-2012
IEEE Standard for Local and metropolitan area networks--Virtual Bridged Local Area Networks--Bridge Port Extension

This standard specifies the operation of Bridge Port Extenders, including management, protocols, and algorithms. Bridge Port Extenders operate in support of the MAC Service by Extended Bridges.

Learn More About 802.1BR-2012

Subscribe to our Newsletter

Sign up for our monthly newsletter to learn about new developments, including resources, insights and more.