Tag: smart grid

IEEE Guide for Safety in Substation Grounding

IEEE Standard for Low-Frequency (less than 500 kHz) Narrowband Power Line Communications for Smart Grid Applications – Amendment 1

Changes to clarify how and when to encrypt header and payload information elements, update the interleaver design in order to eliminate some drawbacks in certain channels, a new PHY data…

IEEE Standard for Ethernet Amendment 7: Media Access Control Parameters, Physical Layers, and Management Parameters for 2.5 Gb/s and 5 Gb/s Operation, Types 2.5GBASE-T and 5GBASE-T

Ethernet Media Access Control (MAC) parameters, Physical Layer specifications, and management objects for the transfer of Ethernet format frames at 2.5 Gb/s and 5 Gb/s over balanced twisted-pair transmission media…

IEC/IEEE International Standard – Communication networks and systems for power utility automation – Part 9-3: Precision time protocol profile for power utility automation

This part of IEC 61850 specifies a precision time protocol (PTP) profile of IEC 61588:2009 ¦ IEEE Std 1588-2008 applicable to power utility automation, which allows compliance with the highest…

IEEE Standard for Local and metropolitan area networks–Bridges and Bridged Networks–Amendment 29: Cyclic Queuing and Forwarding

The use of traffic scheduling and per-stream filtering and policing to support cyclic queuing and forwarding are described in this amendment to IEEE Std 802.1Q-2014.

IEEE Recommended Practice for the Planning and Design of the Microgrid

The factors that should be taken into account for planning and designing microgrids are covered in this recommended practice. It provides approaches and good practices to be considered in the…

IEEE Standard for Local and metropolitan area networks– Timing and Synchronization for Time-Sensitive Applications in Bridged Local Area Networks– Corrigendum 2: Technical and Editorial Corrections

Technical and editorial corrections are provided by this corrigendum to IEEE Std 802.1AS.

IEEE Standard for Local and metropolitan area networks – Station and Media Access Control Connectivity Discovery

This document defines a protocol and a set of managed objects that can be used for discovering the physical topology from adjacent stations in IEEE 802(R) LANs. (The PDF of…

IEEE Standard for Ethernet

Ethernet local area network operation is specified for selected speeds of operation from 1 Mb/s to 100 Gb/s using a common media access control (MAC) specification and management information base…
Subscribe to our Newsletter

Sign up for our monthly newsletter to learn about new developments, including resources, insights and more.