A list of graphic symbols for the designation of electrical, electronic, and pole line devices for layout drawings of cable television (CATV) systems is provided. This standard does not use…
This standard specifies methods for measurement of the luminance signal-to-noise ratio of video magnetic-tape recording systems operating on CCIR System Mu (525/60) with NTSC color encoding. See [Bl], [B2], [B3],…
This standard describes methods for measuring the linear waveform distortions of TV video signals, that is, distortions which are caused by amplitude-independent (linear) transmission characteristics of television equipment and facilities.…
The basic requirements for a test circuit that can be used to measure longitudinal balance are defined. Resistive elements are specified because they are generally considered easy to duplicate and…
One-port and two-port impedance standards and measurement techniques in the frequency range 100 kHz to 110 GHz. Limited to linear passive devices. Techniques to include at least bridges, slotted lines,…
The methods that are used to measure telephone-set transmission performance may be divided into two classes: objective methods and subjective methods. The objective methods, which are those discussed in this…
Superseded by IEEE Std 269-2002. Practical methods for measuring the transmission characteristics of both digital and conventional to wire analog telephone sets by means of objective measurements on a test…
Practical methods for making laboratory measurements of electroacoustic characteristics of analog and digital telephones, handsets, and headsets are provided in this revised standard. The methods may also be applicable to…
Construction Drawings of Line Impedance Network Required for Measurement of Conducted Interference to the Power Line from FM and Television Broadcast Receivers in the Range of 300 kHz to 25…
