Project Details
This standard is intended for use as a basis for performance and interchangeability of equipment covered, and to assist in the proper selection of such equipment. Safety precautions are also addressed. This standard covers certain electrical, dimensional, and mechanical characteristics, and takes into consideration certain safety features of current and inductively coupled voltage transformers of types generally used in the measurement of electricity and the control.
Standards Committee | |
PAR Approval |
2019-03-21
|
PARs |
Additional Resources Details
Historical Base Standard |
Working Group Details
Working Group |
Instrument-WGC57.13 - Instrument Transformers - Req for Inst. Xfrmrs
|
Standards Committee | |
Society | |
IEEE Program Manager | |
Existing Standards |
Superseded. Electrical, dimensional, and mechanical characteristics are covered, taking into consideration certain safety features, for current and inductively coupled voltage transformers of types generally used in the measurement of electricity and the control of equipment associated with the generation, transmission, and distribution of alternating current. The aim is to provide a basis for performance, interchangeability, and safety of equipment covered and to assist in the proper selection of such equipment. Accuracy classes for metering service are provided. The test code covers measurment and calculation of radio and phase angle, demagnetization, impedance and excitation measurements, polarity determination, resistance measurements, short-time characteristics, temperature rise tests, dielectric tests, and measurment of open-circuit voltage of current transformers.
|
Superseded by IEEE Std C57.13-2008. Electrical, dimensional, and mechanical characteristics are covered, taking into consideration certain safety features, for current and inductively coupled voltage transformers of types generally used in the measurement of electricity and the control of equipment associated with the generation, transmission, and distribution of alternating current. The aim is to provide a basis for performance, interchangeability, and safety of equipment covered, and to assist in the proper selection of such equipment. Accuracy classes for metering service are provided. The test code covers measurement and calculation of ratio and phase angle, demagnetization, impedance and excitation measurements, polarity determination, resistance measurements, short-time characteristics, temperature-rise tests, dielectric tests, and measurement of open-circuit voltage of current transformers. Interpretations are available at http://standards.ieee.org/reading/ieee/interp/C57.13-1993.html
|
|
The purpose of this standard is to cover conformance test requirements for current and inductively coupled voltage transformers used for measurement and control functions in unit substations at primary system voltages above 600 V, but not exceeding 38 kV. The report describes relevant performance tests to demonstrate compliance with the applicable standards. The test specimen is normally subjected to all planned routine tests prior to the initiation of the conformance test program.
|
|
Conformance test requirements are provided for current and inductively-coupled voltage transformers used for measurement and control functions in unit substations at primary system voltages above 600 V, but not exceeding 38 kV, except for those in certain installations as set forth in the standard. The selection of transformers for conformance testing, the basis for conformance, and the treatment of failures within a test sequence are covered. Impulse, voltage-withstand, accuracy, and temperature rise are specified. Insulation systems acceptance and production monitoring are considered
|
|
Electrical, dimensional, and mechanical characteristics are covered, taking into
consideration certain safety features, for current and inductively coupled voltage transformers of
types generally used in the measurement of electricity and the control of equipment associated
with the generation, transmission, and distribution of alternating current. The aim is to provide a
basis for performance and interchangeability of equipment covered and to assist in the proper
selection of such equipment. Safety precautions are also addressed. Accuracy classes for
metering service are provided. The test code covers measurement and calculation of ratio and
phase angle, demagnetization, impedance and excitation measurements, polarity determination,
resistance measurements, short-time characteristics, temperature rise tests, dielectric tests, and
measurement of open-circuit voltage of current transformers.
|
|
Electrical, dimensional, and mechanical characteristics are covered, taking into consideration certain safety features, for current and inductively coupled voltage transformers of types generally used in the measurement of electricity and the control of equipment associated with the generation, transmission, and distribution of alternating current. The aim is to provide a basis for performance and interchangeability of equipment covered and to assist in the proper selection of such equipment. Safety precautions are also addressed. Accuracy classes for metering service are provided. The test code covers measurement and calculation of ratio and phase angle, demagnetization, impedance and excitation measurements, polarity determination, resistance measurements, short-time characteristics, temperature rise tests, dielectric tests, and measurement of open-circuit voltage of current transformers.
|