Project Details
The requirements in this standard apply to all 50 Hz and 60 Hz synchronous generators driven by various sources such as reciprocating engines, steam turbines and/or by combustion gas turbines. The drive may be direct or through a gearbox or other device that permits different speeds for the turbine and the generator. Also included are synchronous compensators (condensers) of the same output range connected to a grid. Hydraulic driven applications are covered in ANSI/IEEE C50.12.
The generators covered by this standard are to have rated outputs of 10 MVA and above. Generators below this rating are generally covered by NEMA-MG 1 [B19]
Standards Committee | |
PAR Approval |
2019-05-21
|
PARs |
Additional Resources Details
Historical Base Standard |
Working Group Details
Working Group |
GEN - WG8 - Generator SC - Coordination of C50s and IEC - WG#8
|
Standards Committee | |
Society | |
IEEE Program Manager | |
Existing Standards |
The requirements in this standard are applied to 50 Hz and 60 Hz, two-pole and four-pole, cylindrical-rotor synchronous generators driven by steam turbines and/or by combustion gas turbines. The drive may be direct or through a gearbox or other device that permits different speeds for the turbine and the generator. The generators covered by this standard are to have rated outputs of 10 MVA and above.
|
The requirements in this standard are applied to 50 Hz and 60 Hz, two-pole and four pole, cylindrical-rotor synchronous generators driven by steam turbines and/or by combustion gas turbines. The drive may be direct or through a gearbox or other device that permits different speeds for the turbine and the generator. The generators covered by this standard are to have rated outputs of 10 MVA and above.
|