Two types of design tests for relays and relay systems that relate to the immunity of this equipment to repetitive electrical transients are specified. Test generator characteristics, test wave-forms, selection of equipment terminals on which tests are to be conducted, test procedures, criteria for acceptance, and documentation of test results are described. This standard has been harmonized with IEC standards where consensus could be reached.
- Sponsor Committee
- PE/PSRCC - Power System Relaying and Control
Learn More About PE/PSRCC - Power System Relaying and Control - Status
- Superseded Standard
- PAR Approval
- 1995-03-16
- Superseded by
- C37.90.1-2012
- Superseding
- C37.90.1-1989
- Board Approval
- 2002-03-21
- History
-
- ANSI Approved:
- 2002-08-01
- Published:
- 2002-05-24
Additional Resources
- Erratas
- C37.90.1-2002_errata.zip
Working Group Details
- Society
- IEEE Power and Energy Society
Learn More About IEEE Power and Energy Society - Sponsor Committee
- PE/PSRCC - Power System Relaying and Control
Learn More About PE/PSRCC - Power System Relaying and Control - Working Group
-
C37.111_WG - (Inactive) Revision of PC37.111 Comtrade std.
- IEEE Program Manager
- Malia Zaman
Contact Malia Zaman - Working Group Chair
- Mark Adamiak
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
62843-2013
Standard for N times 64 kilobit per second optical fiber interfaces between teleprotection and multiplexer equipment
An optical interface for use between teleprotection and digital multiplexer equipment that can operate at a data rate of N times 64 kilobit per second where N = 1, 2u202612 is described. Requirements for both physical connection and the communications timing are also included.
C93.3-1995
American National Standard--Requirements for Power-Line Carrier Line Traps
This standard applies to a line trap inserted into a power circuit to minimize carrier-frequency signal losses. The standard covers line traps in which the main coil is designed as a single phase, air-cooled inductor of the dry type.
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
C37.111-2013
IEEE/IEC International Standard - Measuring relays and protection equipment - Part 24: Common format for transient data exchange (COMTRADE) for power systems
Also known as IEC 60255-24 Ed.2, this standard defines a format for files containing transient waveform and event data collected from power systems or power system models. The format is intended to provide an easily interpretable form for use in exchanging data. The standard is for files stored on currently used physical media such as portable external hard drives, USB drives, flash drives, CD, DVD. It is not a standard for transferring data files over communication networks.