A generic standard that may be applied in all fields of electronics where equipment and installations are required to conform to the 482.6 mm (19 in) equipment practice based on IEEE Std 1101.1-1991, IEC 297-3 (1984), and IEC 297-4 (1995). Dimensions are provided that will ensure mechanical interchangeability of subracks and plug-in units.
- Standard Committee
- C/MSC - Microprocessor Standards Committee
- Status
- Inactive-Reserved Standard
- Board Approval
- 1996-12-10
- History
-
- ANSI Approved:
- 1997-05-23
- Published:
- 1996-11-30
- Reaffirmed:
- 2008-01-31
- Inactivated Date:
- 2019-11-07
Working Group Details
- Society
- IEEE Computer Society
- Standard Committee
- C/MSC - Microprocessor Standards Committee
- Working Group
-
1101_WG - Equipment Practice Working Group
- IEEE Program Manager
- Tom Thompson
Contact Tom Thompson - Working Group Chair
- Ralph Kearfott
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
1101.1-1998
IEEE Standard for Mechanical Core Specifications for Microcomputers Using IEC 60603-2 Connectors
The basic dimensions of a range of modular subracks conforming to IEC 60297-3 (1984-01) and IEC 60297-4 (1995-03) for mounting in equipment according to IEC 60297-1 (1986-09) and ANSI/EIA 310-D-1992, together with the basic dimensions of a compatible range of plug-in units, printed boards, and backplanes, are covered. The dimensions and tolerances necessary to ensure mechanical function compatibility are provided. This standard offers total system integration guidelines with attendant advantages, such as reduction in design and development time, manufacturing cost savings, and distinct marketing advantages.
1101.11-1998
IEEE Standard for Mechanical Rear Plug-in Units Specifications for Microcomputers Using IEEE 1101.1 and IEEE 1101.10 Equipment Practice
Additional dimensions that will ensure mechanical interchangeability of subracks and plug-in units based on IEEE P1101.1 (D1.0, 1997), IEEE Std 1101.10-1996, and the environmental requirements of IEC 61587-1 (May 1998-Draft) and IEC 61587-3 (May 1998-Draft) are specified.
1101.2-1992
IEEE Standard for Mechanical Core Specifications for Conduction-Cooled Eurocards
Mechanical characteristics of conduction-cooled versions of Eurocard-based circuit card assemblies are described. This specification is applicable to, but not limited to, the VMEbus standard, an internal interconnect (backplane) bus intended for connecting processing elements to their immediate fundamental resources. The aim is to ensure mechanical interchangeability of conduction-cooled circuit card assemblies in a format suitable for military and rugged applications and to ensure their compatibility with commercial, double-height 16 mm, Eurocard chassis. Reaffirmed 2001