Inactive-Reserved Standard

IEEE 1101.1-1998

IEEE Standard for Mechanical Core Specifications for Microcomputers Using IEC 60603-2 Connectors

The basic dimensions of a range of modular subracks conforming to IEC 60297-3 (1984-01) and IEC 60297-4 (1995-03) for mounting in equipment according to IEC 60297-1 (1986-09) and ANSI/EIA 310-D-1992, together with the basic dimensions of a compatible range of plug-in units, printed boards, and backplanes, are covered. The dimensions and tolerances necessary to ensure mechanical function compatibility are provided. This standard offers total system integration guidelines with attendant advantages, such as reduction in design and development time, manufacturing cost savings, and distinct marketing advantages.

Standard Committee
C/MSC - Microprocessor Standards Committee
Status
Inactive-Reserved Standard
Superseding
1101.1-1991
Board Approval
1998-09-28
History
ANSI Approved:
2008-05-19
Published:
1998-12-18
Reaffirmed:
2008-01-31
Inactivated Date:
2019-11-07

Working Group Details

Society
IEEE Computer Society
Standard Committee
C/MSC - Microprocessor Standards Committee
Working Group
1101_WG - Equipment Practice Working Group
IEEE Program Manager
Tom Thompson
Contact Tom Thompson
Working Group Chair
Ralph Kearfott

Other Activities From This Working Group

Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.


No Active Projects

Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.


No Active Standards

These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.


No Superseded Standards

These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.


No Inactive-Withdrawn Standards

These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.


1101.10-1996
IEEE Standard for Additional Mechanical Specifications for Microcomputers Using the IEEE 1101.1-1998 Equipment Practice

A generic standard that may be applied in all fields of electronics where equipment and installations are required to conform to the 482.6 mm (19 in) equipment practice based on IEEE Std 1101.1-1991, IEC 297-3 (1984), and IEC 297-4 (1995). Dimensions are provided that will ensure mechanical interchangeability of subracks and plug-in units.

Learn More About 1101.10-1996

1101.11-1998
IEEE Standard for Mechanical Rear Plug-in Units Specifications for Microcomputers Using IEEE 1101.1 and IEEE 1101.10 Equipment Practice

Additional dimensions that will ensure mechanical interchangeability of subracks and plug-in units based on IEEE P1101.1 (D1.0, 1997), IEEE Std 1101.10-1996, and the environmental requirements of IEC 61587-1 (May 1998-Draft) and IEC 61587-3 (May 1998-Draft) are specified.

Learn More About 1101.11-1998

1101.2-1992
IEEE Standard for Mechanical Core Specifications for Conduction-Cooled Eurocards

Mechanical characteristics of conduction-cooled versions of Eurocard-based circuit card assemblies are described. This specification is applicable to, but not limited to, the VMEbus standard, an internal interconnect (backplane) bus intended for connecting processing elements to their immediate fundamental resources. The aim is to ensure mechanical interchangeability of conduction-cooled circuit card assemblies in a format suitable for military and rugged applications and to ensure their compatibility with commercial, double-height 16 mm, Eurocard chassis. Reaffirmed 2001

Learn More About 1101.2-1992

Subscribe to our Newsletter

Sign up for our monthly newsletter to learn about new developments, including resources, insights and more.