Project Icon

Computer Technology Projects

Displaying results 1 - 40 of 105
123»
Project Name
StatusHelp
P730 - Software Quality Assurance Processes The activities described in this standard are intended to enable the software project to use the software quality assurance processes to produce... Active Project
P802.1AC - Draft Media Access Control (MAC) Service Definition The MAC service was originally defined within an ISO/IEC standard (ISO/IEC 15802-1), and the Internal Sublayer Services are defined within IEEE... Active Project
P802.1AEbw - Media Access Control (MAC) Security Amendment: Extended Packet Numbering This standard specifies the optional use of Cipher Suites that make use of a 64-bit PN to allow more than 2**32 packets to be sent with a single... Active Project
P802.1AS-2011/Cor 1 - Timing and Synchronization for Time-Sensitive Applications in Bridged Local Area Networks - Corrigendum 1: Technical and editorial corrections The purpose of this corrigendum is to correct minor errors, bugs, ambiguities, and inconsistencies that were missed during the balloting of IEEE... Active Project
P802.1ASbt - Timing and Synchronization for Time-Sensitive Applications in Bridged Local Area Networks Amendment: Enhancements and performance improvements This amendment allows IEEE 802.1AS to be used: - With a greater number of network media types and a greater variety of network configurations, and... Active Project
P802.1AX - Link Aggregation Link Aggregation allows the establishment of full duplex point-to-point links that have a higher aggregate bandwidth than the individual links... Active Project
P802.1AXbq - Link Aggregation Amendment: Distributed Resilient Network Interconnect The purpose of this amendment is to enhance Link Aggregation so that a set of physical and/or virtual bridge components or end stations provide a... Active Project
P802.1Q-2011/Cor 2 - Media Access Control (MAC) Bridges and Virtual Bridged Local Area Networks - Corrigendum 2: Technical and editorial corrections This corrigendum to IEEE Std 802.1Q - 2011 corrects minor technical and editorial errors and inconsistencies that have been notified to the 802.1... Active Project
P802.1Qbp - Virtual Bridged Local Area Networks Amendment: Equal Cost Multiple Paths (ECMP) This standard provides the additional capability to use many more equal cost paths than 802.1aq's current Equal Cost Tree (ECT) mechanism due to... Active Project
P802.1Qbu - Media Access Control (MAC) Bridges and Virtual Bridged Local Area Networks Amendment: Frame Preemption. The purpose of this amendment is to provide reduced latency transmission for scheduled, time-critical frames in a bridged LAN. Active Project
P802.1Qbv - Media Access Control (MAC) Bridges and Virtual Bridged Local Area Networks Amendment: Enhancements for Scheduled Traffic Bridges are increasingly used to interconnect devices that support scheduled applications (e.g., industrial automation, process control and... Active Project
P802.1Xbx - Port-Based Network Access Control Amendment: MAC Security Key Agreement protocol (MKA) extensions This project will extend MKA to realize additional security and manageability capabilities made possible by the IEEE Std 802.1AEbw amendment that... Active Project
P802.3.1 - Management Information Base (MIB) definitions for Ethernet The purpose of the standard is to publish the SMIv2 and GDMO MIB module specifications in a single document that is separate from IEEE Std 802.3,... Active Project
P802.3 - Draft Ethernet This standard defines Ethernet local area, access and metropolitan area networks. Ethernet is specified at selected speeds of operation; and uses... Active Project
P802.3bj - Specific Requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications Amendment: Physical Layer Specifications and Management Parameters for 100 Gb/s Operation Over Backplanes and Copper Cables The scope of this project is to specify additions to and appropriate modifications of IEEE Std 802.3 to add 100 Gb/s 4 lane Physical Layer (PHY)... Active Project
P802.3bk - Specific requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications Amendment: Physical Layer Specifications and Management Parameters for Extended Ethernet Passive Optical Networks The purpose of this project is to extend the optical loss budgets supported by Ethernet Passive Optical Networks to support higher density and... Active Project
P802.11ac - Draft IT - LAN/MAN - Specific Requirements - Part 11: Wireless LAN Medium Access Control and Physical Layer Specifications - Amd: Enhancements for Very High Throughput for operation in bands below 6GHz The purpose of the amendment is to improve the 802.11 wireless local area network (LAN) user experience by providing significantly higher basic... Active Project
P802.11ad - Draft Specific Requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications - Amendment 3: Enhancements for Very High Throughput in the 60 GHz Band The purpose of the amendment is to improve the 802.11 user experience by providing significantly higher throughput for local area networking Active Project
P802.11af - Specific Requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications; Amendment: TV White Spaces Operation The purpose of this amendment is to allow 802.11 wireless networks to be used in the TV white space. Active Project
P802.11ah - Specific Requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications: Amendment- Sub 1 GHz License-Exempt Operation The purpose of this amendment defines operation of license-exempt IEEE 802.11 wireless networks in frequency bands below 1 GHz excluding the TV... Active Project
P802.11ai - Specific Requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications: Amendment- Fast Initial Link Setup This amendment defines mechanisms that provide IEEE 802.11 networks with fast initial link set-up methods which do not degrade the security... Active Project
P802.15.4 - Approved Draft Part 15.4: Low-Rate Wireless Personal Area Networks (WPANs) The standard provides for ultra low complexity, ultra low cost, ultra low power consumption and low data rate wireless connectivity among... Active Project
P802.15.4j - Specific Requirements - Part 15.4: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low Rate Wireless Personal Area Networks (WPANs) Amendment: Alternative Physical Layer Extension to support Medical Body Area Network (MBAN) services operating in the 2360-2400 MHz band This amendment describes support for Medical Body Area Networks (MBAN) operating in the band from 2360 to 2400 MHz. The FCC rules define the use... Active Project
P802.15.4k - Part 15.4: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low Rate Wireless Personal Area Networks (WPANs) Amendment - Physical Layer (PHY) Specifications for Low Energy, Critical Infrastructure Monitoring Networks (LECIM) The purpose of this amendment is to facilitate point to multi-thousands of points communications for critical infrastructure monitoring devices.... Active Project
P802.15.4m - Part 15.4: Low Rate Wireless Personal Area Networks (LR-WPANs) Amendment: TV White Space Between 54 MHz and 862 MHz Physical Layer This amendment specifies a physical layer for 802.15.4 meeting TV white space regulatory requirements in as many regulatory domains as practical... Active Project
P802.15.4n - Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs) Amendment: Physical Layer Utilizing Dedicated Medical Bands in China This amendment defines a physical layer for IEEE Std. 802.15.4 utilizing the approved 174-216 MHz, 407-425 MHz and 608-630 MHz medical bands in... Active Project
P802.15.4p - Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs) Amendment: Positive Train Control (PTC) System Physical Layer This amendment specifies a physical layer (PHY) for IEEE STD 802.15.4, and any media access control (MAC) changes needed to support this PHY, for... Active Project
P802.15.7 - Approved Draft Short-Range Wireless Optical Communication Using Visible Light The purpose of this standard is to provide a global standard for short-range optical wireless communication using visible light. The standard will... Active Project
P802.15.8 - Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Peer Aware Communications (PAC) The purpose is to provide a global standard for scalable, low power, and highly reliable wireless communications for emerging services such as... Active Project
P802.15.9 - Recommended Practice for Transport of Key Management Protocol (KMP) Datagrams This Recommended Practice describes support for transporting KMPs datagrams to support the security functionality present in IEEE Std 802.15.4 and... Active Project
P802.16.1 - Draft WirelessMAN-Advanced Air Interface for Broadband Wireless Access Systems This standard enables rapid worldwide deployment of innovative, cost-effective, and interoperable multivendor broadband wireless access products,... Active Project
P802.16.1a - WirelessMAN-Advanced Air Interface for Broadband Wireless Access Systems - Amendment: Higher Reliability Networks This amendment addresses higher reliability requirements that are not supported by IEEE Std 802.16.1. Active Project
P802.16.1b - Draft WirelessMAN-Advanced Air Interface for Broadband Wireless Access Systems - Amendment: Enhancements to Support Machine-to-Machine Applications This amendment describes enhancements to enable a range of Machine-to-Machine applications in which the device communications require wide area... Active Project
P802.16 - Draft Part 16: Air Interface for Broadband Wireless Access Systems This standard enables rapid worldwide deployment of innovative, cost-effective, and interoperable multivendor broadband wireless access products,... Active Project
P802.16n - Part 16: Air Interface for Broadband Wireless Access Systems Amendment: Higher Reliability Networks This amendment addresses higher reliability requirements that are not supported by IEEE Std. 802.16. Active Project
P802.16p - Draft Air Interface for Broadband Wireless Access Systems Amendment: Enhancements to Support Machine-to-Machine Applications This amendment describes enhancements to enable a range of Machine-to-Machine applications in which the device communications require wide area... Active Project
P802.19.1 - Specific Requirements - Part 19: TV White Space Coexistence Methods The purpose of the standard is to enable the family of IEEE 802 Wireless Standards to most effectively use TV White Space by providing standard... Active Project
P802.21c - Part 21: Media Independent Handover Services Amendment:Optimized Single Radio Handovers The purpose of this amendment is to enhance the user experience by enabling optimized single radio handover solutions between heterogeneous... Active Project
P802.21d - Part 21: Media Independent Handover Services Amendment: Multicast Group Management The purpose of this standard is to enable the handover for a group of users across the same or multiple access networks. Additionally, this... Active Project
P802.22.2 - Draft Recommended Practice for Information Technology - Wireless Regional Area Networks (WRAN) - Specific requirements - Part 22.2: Recommended Practice for the Installation and Deployment of IEEE 802.22 Systems This document provides detailed technical guidance to installers, deployers, and operators of IEEE 802.22 compliant systems to help assure that... Active Project
Displaying results 1 - 40 of 105 - all
123»