Project Icon

IEEE Project

PC95.1-2345 - IEEE Draft Standard for Military Workplaces--Force Health Protection Regarding Personnel Exposure to Electric, Magnetic and Electromagnetic Fields, 0 Hz to 300 GHz

The purpose of this standard is to provide science-based exposure limits for incorporation into a safety and occupational health (SOH) risk management program to protect personnel in a military workplace against established adverse health effects associated with exposure to electric, magnetic and electromagnetic fields, induced and contact currents, and contact (and arcing) voltages over the frequency range of 0 Hz to 300 GHz.This standard provides recommendations to protect personnel in military environments against established adverse health effects associated with exposure to electric, magnetic, and electromagnetic fields, induced and contact current, and contact and arcing voltages over the frequency range of 0 Hz to 300 GHz. The recommendations, expressed as dosimetric reference limits (DRLs) and exposure reference levels (ERLs), incorporate safety factors that address uncertainties such as uncertainties in the experimental data, measurement uncertainties, and differences in sensitivity between individuals, so as to establish an appropriate margin of safety. The DRLs are expressed in terms of in situ electric field strength, specific absorption rate (SAR), and incident power density. The ERLs are expressed in terms of environmental exposure fields and power densities. In the case of contact current, however, only ERLs are provided. The DRLs and ERLs are intended to protect against established adverse human health effects associated with electrostimulation of tissue and partial and whole-body heating, but may not protect against electromagnetic interference (EMI) with implanted medical devices. This standard does not apply to exposure of informed volunteers in medical or scientific research studies subject to approval by institutional review boards for the use of human subjects, nor does it include exposure assessment techniques, risk management/safety program procedures, warning sign design, procedures for medical treatment of suspected overexposures, or assessment of hazards associated with exposure of ordnance, fuel, or electro-explosive devices.
  • Status: Active Project Help

Get Involved In The Development Of This Standard

Contact the IEEE-SA Liaison Simply click here to voice your interest. Joan Woolery
Learn More About Standards ParticipationAnyone can participate, there are a variety of programs and services to facilitate the involvement of industry and the public. More
Become a Member and Ballot on this StandardMembership empowers you to participate & lead in the development of standards. Tell Me More

Standards Help

IEEE-SA Standards Development Services are proven to expedite the process by 40%. Click here to learn more!