IEEE Standards Association
Corporate Standards in Development
Project Name
Status 
P1667 - Standard for Discovery, Authentication, and Authorization in Host Attachments of Storage Devices This standard defines discovery, authentication, and authorization protocols between hosts and storage devices over multiple transports. This standard specifies a new Silo Type Identifier (STID)... 
P1735 - Standard Recommended Practice for Encryption and Management of Electronic Design Intellectual Property (IP) This standard specifies embeddable and encapsulating markup syntaxes for design IP encryption and rights management, together with recommendations for integration with ...
P1858 - Standard for Camera Phone Image Quality (CPIQ)This standard addresses the fundamental attributes that contribute to image quality, as well as identifying existing metrics and other useful information relating to these attributes.
P1860 - Standard for Voltage and Reactive Power in 1000kV or Greater (Ultra High Voltage) AC SystemsThis standard specifies basic requirements of voltage and reactive power, allowed voltage deviation, as well as technical measures for voltage and reactive power allocation and adjustment in 1000kV or greater AC systems.
P1861 - Standard for Acceptance Tests on Sitehand-Over Test of 1000kV or Greater (Ultra High Voltage) AC Electric Equipment and Commissioning ProceduresThis standard applies to acceptance tests on site of 1000kV or greater voltage level electric equipment. It establishes criteria and requirements for test items, conditions, methods and results.
P1862 - Standard for Overvoltage and Insulation Coordination of 1000kV or Greater (Ultra High Voltage) AC Transmission ProjectsThis standard applies to three-phase ultra high voltage (UHV) AC systems having a voltage of 1000kV or greater. It specifies the overvoltage and insulation co-ordination of a UHV AC transmission project.
P1888.1 - Standard for a Ubiquitous Community Network: Control and ManagementThis standard mainly specifies the network gateway signal flow for access control, registration management, state querying, event reporting, and remote management.
P1888.2 - Standard for Ubiquitous Green Community Control Network: Heterogeneous Networks Convergence and ScalabilityThis standard distinguishes the device identity from its location information, and the access method from core transmission, therefore supporting compatibility in heterogeneous network technologies, while meeting security requirements, offering system robustness and supplying better performance in system operation and management.
P1888.3 - Standard for Ubiquitous Green Community Control Network: SecurityThis standard describes security requirements for the ubiquitous green community control network and specifies the system security architecture along with security procedures and protocols.
P1900.4.1 - Standard for Interfaces and Protocols Enabling Distributed Decision Making for Optimized Radio Resource Usage in Heterogeneous Wireless Networks This standard uses the IEEE 1900.4 standard as a baseline standard. It provides detailed description of interfaces and service access points defined in the IEEE 1900.4 standard...
P1901.2 - Standard for Low Frequency (less than 500 kHz) Narrow Band Power Line Communications for Smart Grid Applications This standard specifies communications for low frequency (less than 500 kHz) narrowband power line devices via alternating current and direct current electric power lines.
P1904.1 - Standard for Service Interoperability in Ethernet Passive Optical Networks This standard describes the system-level requirements needed to ensure service-level, multi-vendor interoperability of Ethernet Passive Optical Network (EPON) equipment.
P1904.1-Conformance01 - Standard for Conformance Test Procedures for Service Interoperability in Ethernet Passive Optical Networks, IEEE Std 1904.1 Package A This standard specifies a suite of conformance tests for system-level requirements of Ethernet Passive Optical Network (EPON) equipment, defined in IEEE Std 1904.1, Package A.
P1904.1-Conformance02 - Standard for Conformance Test Procedures for Service Interoperability in Ethernet Passive Optical Networks, IEEE Std 1904.1 Package B This standard specifies a suite of conformance tests for system-level requirements of Ethernet Passive Optical Network (EPON) equipment, defined in IEEE Std 1904.1, Package B.
P1904.1-Conformance03 - Standard for Conformance Test Procedures for Service Interoperability in Ethernet Passive Optical Networks, IEEE Std 1904.1, Package C This standard specifies a suite of conformance tests for system-level requirements of Ethernet Passive Optical Network (EPON) equipment, defined in IEEE Std 1904.1, Package C.
P2030.3 - Standard for Test Procedures for Electric Energy Storage Equipment and Systems for Electric Power Systems Applications This standard establishes test procedures for electric energy storage equipment and systems for electric power systems (EPS) applications.
P3333.2 - Standard for Three-Dimensional Model Creation Using Unprocessed 3D Medical DataThis standard establishes the minimum requirements for enabling portability and consistent display of 3-D medical images across dedicated 3D display equipment, computers, mobile smart pads and smart phones.