Directions and requirements are provided for the conversion of qualified power switchgear equipment. Examples such as low-voltage power circuit breakers; high-voltage outdoor and medium-voltage indoor drawout power circuit breakers; medium-voltage…
This Standard collects the common requirements that are in many IEEE Power Switchgear Standards. These include: Service Conditions, Design (type) Tests, Design and Construction, Production (routine) Tests and Ratings. This…
This standard is intended for use as a basis for establishing the performance, interchangeability, and safety of the equipment covered and to assist in the proper selection of such equipment.
Conformance tests and requirements for the coating integrity of pole-mounted enclosures for application in coastal environments containing apparatus energized in excess of 600 V, typically located out of reach of…
Conformance tests and requirements for the coating integrity of carbon steel polemounted enclosures containing apparatus energized in excess of 600 V, typically located out of reach of the general public,…
Characteristics relating to performance, limited electrical and mechanical interchangeability, and guidance to assist in the proper selection of sealed dry-type transformers are provided in this standard. Specific rating combinations are…
The electrical characteristics and mechanical features of liquid-immersed transformers 69 kV or less (but not limited to 69 kV), used for supplying electric power to direct arc-melting furnaces are covered…
To correct technical omission/errors to IEEE Std 1015-2006 Chapter 4 4.12 Normative references Annex 7A (informative) MCCB or MCP data record 7A.6 TEST INSTRUCTIONS 7A.6.2 PRIMARY CIRCUIT INSULATION RESISTANCE 7A.6.2…
