Superseded by IEEE Std C57.110-2008. Methods are developed to conservatively evaluate the feasibility of supplying additional nonsinusoidal load currents from an existing installed dry-type or liquified transformer, as a portion…
Tests and evaluation procedures for silicone transformer fluid are recommended. Criteria for maintenance and methods of reconditioning silicone fluid are described. The aim is to assist the transformer operator in…
This test procedure applies to the detection and measurement by the wide-band apparent charge method of partial discharges occurring in liquid-filled power transformers and shunt reactors during dielectric test where…
The detection and measurement by the wide-band apparent charge method of partial discharges occurring in liquid-filled power transformers and shunt reactors during dielectric tests are covered. This standard covers the…
IEEE C57.114-1990, IEEE Seismic Guide for Power Transformers and Reactors, specifies recommendations for the design and installation of power transformers and reactors to withstand the effects of earthquakes.
The guide covers modern power transformers rated above 100 MVA, three-phase equivalent and 65°C rise. The general approach is tutorial. Four different types of loading, that is, normal life expectancy…
The selection, application, and specification considerations for the unit transformer and unit auxiliaries transformers are described, taking into account their connections, voltage and kilovoltampere ratings, and excitation and through-fault capabilities…
Conformance test requirements are provided for current and inductively-coupled voltage transformers used for measurement and control functions in unit substations at primary system voltages above 600 V, but not exceeding…