Standard Details
The requirements in this standard are applied to 50 Hz and 60 Hz, two-pole and four pole, cylindrical-rotor synchronous generators driven by steam turbines and/or by combustion gas turbines. The drive may be direct or through a gearbox or other device that permits different speeds for the turbine and the generator. The generators covered by this standard are to have rated outputs of 10 MVA and above.
Standards Committee | |
Status |
Active
|
Board Approval |
2014-03-27
|
History |
Published Date:2014-05-09
|
Additional Resources Details
PAR |
Working Group Details
Working Group |
GEN - WG8 - Generator SC - Coordination of C50s and IEC - WG#8
|
Working Group Chair |
James Lau
|
Standards Committee | |
Society | |
IEEE Program Manager | |
Active Projects |
The requirements in this standard apply to all 50 Hz and 60 Hz synchronous generators driven by various sources such as reciprocating engines, steam turbines and/or by combustion gas turbines. The drive may be direct or through a gearbox or other device that permits different speeds for the turbine and the generator. Also included are synchronous compensators (condensers) of the same output range connected to a grid. Hydraulic driven applications are covered in ANSI/IEEE C50.12.
The generators covered by this standard are to have rated outputs of 10 MVA and above. Generators below this rating are generally covered by NEMA-MG 1 [B19]
|
Existing Standards |
The requirements in this standard are applied to 50 Hz and 60 Hz, two-pole and four-pole, cylindrical-rotor synchronous generators driven by steam turbines and/or by combustion gas turbines. The drive may be direct or through a gearbox or other device that permits different speeds for the turbine and the generator. The generators covered by this standard are to have rated outputs of 10 MVA and above.
|