A method for properly sizing the PV array and battery for stand-alone PV systems where PV is the only charging source is recommended (in conjunction with IEEE Std 1013(TM)). Load calculations and determination of solar radiation in the sizing of the system need special attention. Additionally, the critical nature of the load in deciding an acceptable annual availability needs to be considered.
- Sponsor Committee
- PE/ESSB - Energy Storage & Stationary Battery Committee
Learn More About PE/ESSB - Energy Storage & Stationary Battery Committee - Status
- Inactive-Reserved Standard
- PAR Approval
- 2000-01-30
- Superseded by
- 1562-2021
- Board Approval
- 2007-12-05
- History
-
- ANSI Approved:
- 2008-05-12
- Published:
- 2008-05-12
- Inactivated Date:
- 2021-03-25
Working Group Details
- Society
- IEEE Power and Energy Society
Learn More About IEEE Power and Energy Society - Sponsor Committee
- PE/ESSB - Energy Storage & Stationary Battery Committee
Learn More About PE/ESSB - Energy Storage & Stationary Battery Committee - Working Group
-
ESS_WG_1562 - Working Group for Energy Storage Subsystems
- IEEE Program Manager
- Michael Kipness
Contact Michael Kipness - Working Group Chair
- Curtis Ashton
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
1013-2019
IEEE Recommended Practice for Sizing Lead-Acid Batteries for Stand-Alone Photovoltaic (PV) Systems
A method for determining the energy-capacity requirements (sizing) of both vented and valve-regulated lead-acid batteries used in terrestrial stand-alone photovoltaic (PV) systems is described in this recommended practice. Sizing batteries for hybrid or grid-connected PV systems is beyond the scope of this recommended practice. Installation, maintenance, safety, testing procedures, and consideration of battery types other than lead-acid are beyond the scope of this recommended practice. Recommended practices for the remainder of the electrical systems associated with PV installations are also beyond the scope of this recommended practice.
1561-2019
IEEE Guide for Optimizing the Performance and Life of Lead-Acid Batteries in Remote Hybrid Power Systems
This guide is applicable to lead-acid batteries that are used as the energy storage component in remote hybrid power supplies. The remote hybrid application, with its dual generator option, i.e., both renewable and dispatchable generation, is advantageous in that the battery can usually be charged at will and under circumstances that may also be advantageous for the dispatchable generator.
1562-2021
IEEE Recommended Practice for Sizing Stand-Alone Photovoltaic (PV) Systems
Provided in this recommended practice is information to assist in sizing the array and battery of a stand-alone photovoltaic (PV) system. Systems considered in this recommended practice consist of PV as the only power source and a battery for energy storage. These systems also commonly employ controls to protect the battery from being over- or under-charged and may employ a power conversion subsystem (inverter or converter). This recommended practice is applicable to all stand-alone PV systems where PV is the only charging source. This recommended practice does not include PV hybrid systems nor grid-connected systems. This recommended practice covers lead-acid batteries only; nickel-cadmium and other battery types are not included. This recommended practice does not include the sizing of the system controller, inverter, wiring, or other system components.
1661-2019
IEEE Guide for Test and Evaluation of Lead-Acid Batteries Used in Photovoltaic (PV) Hybrid Power Systems
This guide is specifically prepared for a PV/engine generator hybrid power system, but may also be applicable to all hybrid power systems where there is at least one renewable power source, such as PV, and a dispatchable power source, such as an engine generator. Taper-charge parameters for PV hybrid systems are suggested to help in preparing the battery for a capacity test. A test procedure is provided to ensure appropriate data acquisition, battery characterization, and capacity measurements. Finally, a process to review test results and make appropriate decisions regarding the battery is provided. No cycle-life predictions are made.
937-2019
IEEE Recommended Practice for Installation and Maintenance of Lead-Acid Batteries for Photovoltaic (PV) Systems
Design considerations and procedures for storage, location, mounting, ventilation, assembly, and maintenance of lead-acid storage batteries for photovoltaic power systems are provided in this standard. Safety precautions and instrumentation considerations are also included. Even though general recommended practices are covered, battery manufacturers may provide specific instructions for battery installation and maintenance.
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
1013-2007
IEEE Recommended Practice for Sizing Lead-Acid Batteries for Stand-Alone Photovoltaic (PV) Systems
A method for determining the energy-capacity requirements (sizing) of both vented and valve-regulated lead-acid batteries used in terrestrial stand-alone photovoltaic (PV) systems is described. Sizing batteries for hybrid or grid-connected PV systems is beyond the scope of this document. Installation, maintenance, safety, testing procedures, and consideration of battery types other than lead-acid are beyond the scope of this document. Recommended practices for the remainder of the electrical systems associated with PV installations are also beyond the scope of this document.
1361-2003
IEEE Guide for Selection, Charging, Test and Evaluation of Lead-Acid Batteries Used in Stand-Alone Photovoltaic (PV) Systems
This guide is applicable to all stand-alone photovoltaic (PV) systems where PV is the only charging source. Stand-alone photovoltaic (PV) system parameters and operating conditions are discussed in relation to battery characteristics and expected system performance. Charging parameters for PV systems are suggested to help in the selection of a battery for a specific application. Finally, a performance test to verify the battery selection and system parameters is provided, including discussions on how to interpret test results. Test results only provide information on initial battery performance. No cycle-life predictions are made.
1561-2007
IEEE Guide for Optimizing the Performance and Life of Lead-Acid Batteries in Remote Hybrid Power Systems
This guide is applicable to lead-acid batteries that are used as the energy storage component in remote hybrid power supplies. The remote hybrid application, with its dual generator option, i.e., both renewable and dispatchable generation, is advantageous in that the battery can usually be charged at will and under circumstances that may also be advantageous for the dispatchable generator. The normative references provide guidance to battery safety, installation, and maintenance considerations. This guide discusses battery selection, sizing, and management issues, e.g., cycling, charging, and the effect of temperature and charge-discharge rates on performances such as life and capacity. An informative annex discusses the several lead-acid technologies.
1661-2007
IEEE Guide for Test and Evaluation of Lead-Acid Batteries Used in Photovoltaic (PV) Hybrid Power Systems
This guide is specifically prepared for a PV/engine generator hybrid power system, but may also be applicable to all hybrid power systems where there is at least one renewable power source, such as PV, and a dispatchable power source, such as an engine generator. Taper-charge parameters for PV hybrid systems are suggested to help in preparing the battery for a capacity test. A test procedure is provided to ensure appropriate data acquisition, battery characterization, and capacity measurements. Finally, a process to review test results and make appropriate decisions regarding the battery is provided. No cycle-life predictions are made.
937-2000
IEEE Recommended Practice for Installation and Maintenance of Lead-Acid Batteries for Photovoltaic (PV) Systems
Design considerations and procedures for storage, location, mounting, ventilation, assembly, and maintenance of lead-acid storage batteries for terrestrial photovoltaic (PV) power systems are provided. Safety precautions and instrumentation considerations are included. This standard applies to all terrestrial photovoltaic power systems, regardless of size or application, that contain storage subsystems. The installations addressed apply to the operation of an ac, ac/dc, or dc system with the battery, PV generating subsystem, and load all connected in parallel.
937-2007
IEEE Recommended Practice for Installation and Maintenance of Lead-Acid Batteries for Photovoltaic (PV) Systems
Design considerations and procedures for storage, location, mounting, ventilation, assembly, and maintenance of lead-acid secondary batteries for photovoltaic power systems are provided. Safety precautions and instrumentation considerations are also included. Even though general recommended practices are covered, battery manufacturers may provide specific instructions for battery installation and maintenance.
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards