The problems of system grounding, that is, connection to ground of neutral, of the corner of the delta, or of the midtap of one phase, are covered. The advantages and disadvantages of grounded vs. ungrounded systems are discussed. Information is given on how to ground the system, where the system should be grounded, and how to select equipment for the ground of the neutral circuits. Connecting the frames and enclosures of electric apparatus, such as motors, switchgear, transformers, buses, cables, conduits, building frames, and portable equipment, to a ground system is addressed. The fundamentals of making the interconnection of a ground conductor system between electric equipment and the ground rods, water pipes, etc., are outlined. The problems of static electricity– how it is generated, what processes may produce it, how it is measured, and what should be done to prevent its generation or to drain the static charges to earth to prevent sparking–are treated. Methods of protecting structures against the effects of lightning are also covered. Obtaining a low-resistance connection to earth, use of ground rods, connections to water pipes, etc., are discussed. A separate chapter on electronic equipment is included.
- Standard Committee
- IAS/ICPS/SDC - Industrial & Commercial Power Systems Standards Development Committee
- Status
- Inactive-Reserved Standard
- PAR Approval
- 2003-12-10
- Superseding
- 142-1991
- Board Approval
- 2007-06-07
- History
-
- ANSI Approved:
- 2007-10-04
- Published:
- 2007-11-30
- Inactivated Date:
- 2021-03-25
Additional Resources
- Erratas
- 142-2007_errata.pdf
Working Group Details
- Society
- IEEE Industry Applications Society
- Standard Committee
- IAS/ICPS/SDC - Industrial & Commercial Power Systems Standards Development Committee
- Working Group
-
P1668 - P1668 Working Group
- IEEE Program Manager
- Michael Kipness
Contact Michael Kipness - Working Group Chair
- Mark Stephens
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards