The term askarel generally describes a widely used, broad class of non-flammable synthetic halogenated hydrocarbon insulating liquid. As treated in this Guide it applies solely to askarel used in transformers, reactors, and accessory equipment operated at power frequencies. Certain essential properties must be retained if askarel is to perform reliably its dual role of electrical insulation and heat-transfer agent. It must have adequate dielectric strength to withstand the electric stresses imposed in service. It must retain a sufficiently low viscosity so that its ability to circulate and transfer heat is not impaired. The dielectric losses should not become excessive. It should not be allowed to become so deteriorated or contaminated that it adversely affects other materials in the apparatus. This guide attempts to assist the power equipment operator in his efforts to maintain askarel in serviceable condition. It recommends standardized tests and evaluation procedures. Methods are outlined for reconditioning and reclaiming askarel whenever necessary
- Status
- Inactive-Withdrawn Standard
- Superseded by
- 76-1974
- History
-
- Published:
- 1958-11-30
Working Group Details
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards