Superseded Standard

IEEE 524-2003

IEEE Guide to the Installation of Overhead Transmission Line Conductors

Revision of IEEE Std 524-1992. SUMMARY: This guide provides general recommendations for the selection of methods, equipment, and tools that have been found to be practical for the stringing of overhead transmission line conductors and overhead groundwires. The guide also includes a comprehensive list of definitions for equipment and tools used in stringing and for stringing terms commonly employed. This guide does not address special conductors such as those used for river and canyon crossing. These conductors may be custom designed and often may require special considerations.

Sponsor Committee
PE/T&D - Transmission and Distribution
Learn More
Status
Superseded Standard
PAR Approval
2000-09-21
Superseded by
524-2016
Superseding
524-1992
Board Approval
2003-10-17
History
ANSI Approved:
2003-12-29
Published:
2004-03-11

Working Group Details

Society
IEEE Power and Energy Society
Learn More
Sponsor Committee
PE/T&D - Transmission and Distribution
Learn More
Working Group
TPC-15.11.03 - Construction of Overhead Lines Working Group
IEEE Program Manager
Michael Kipness
Contact
Working Group Chair
Robert Millies

P691

Guide for Transmission Structure Foundation Design and Testing

The material presented in this design guide pertains to the design of foundations for conventional transmission line structures, which include lattice towers, single or multiple shaft poles, H-frame structures, and anchors for guyed structures. It discusses the mode of loads that those structures impose on their foundations and applicable foundation performance criteria. The design guide addresses subsurface investigations and the design of foundations, such as spread foundations (footings), drilled shafts, direct embedded poles, driven piles, and anchors. The full-scale load testing of the above-listed foundation types is also presented. This design guide does not include the structural design of the foundations nor the design of the structure. The foundation engineer should have an understanding of the magnitudes and time-history of various loading conditions imposed on the foundations in order to provide a suitable foundation to support the transmission line structures under the actual loading conditions that may be reasonably expected in actual service.

Learn More

524-2016

IEEE Guide for the Installation of Overhead Transmission Line Conductors

General recommendations for the selection of methods, equipment, and tools that have been found to be practical for the stringing of overhead transmission line conductors and overhead groundwires are provided.

Learn More

No Superseded Standards
No Inactive-Withdrawn Standards

977-2010

IEEE Guide to Installation of Foundations for Transmission Line Structures

Various approaches to good construction practices that could improve the installation of transmission line structure foundations are presented. Spread foundations, drilled shaft foundations, pile foundations, and anchors are treated. This guide is intended to be used as a reference source for those involved in the ownership, design, and construction of transmission structures.

Learn More

Subscribe

Stay up to date about new developments, including resources, insights and more.