FM and television broadcast receivers are frequently potential sources of interference to other FM and television broadcast receivers as well as to receivers in other services. In the range of 300 kc to 25 Mc, this interference can arise from high-level receiver signals such as the IF and, in television receivers, the horizontal deflection system. This standard defines a method for obtaining a measure of the interference conducted by the power line from these various interference sources in the frequency range of 300 kc to 25 Mc. It supersedes and replaces the following three standards: IRE Standards on Receivers: Methods of Measurement of Interference Output of Television Receivers in the Range of 300 to 10,000 kc, 1954 (54 IRE 17.S1), IRE Standards on Methods of Measurement of the Conducted Interference Output of Broadcast and Television Receivers in the Runge of 300 kc to 25 Mc, 1956 (56 IRE 27.S1), and 'Supplement to IRE Standards on Receivers: Methods of Measurement of Interference Output of Television Receivers in the Range of 300 to 10,000 kc, 1954 (54 IRE 17. SI) (58 IRE 27. SI). This standard describes standard input signals, the equipment set-up and measurement techniques.
- Status
- Superseded Standard
- Superseded by
- 213-1987
- Board Approval
- 1961-02-09
- History
-
- ANSI Approved:
- 1977-11-09
- Published:
- 1961-04-06
Working Group Details
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards