The system-level requirements needed to ensure service-level, multi-vendor interoperability of Ethernet Passive Optical Network (EPON) equipment is described. The existing IEEE 802.3 and IEEE 802.1 standards, which ensure the interoperability at the Physical Layer (PHY) and Data Link Layer, are complemented by the specifications. Specifically included in this specification are - EPON system-level interoperability specifications covering equipment functionality, traffic engineering, and service-level quality of service/class of service (QoS/CoS) mechanisms; - Management specifications covering equipment management, service management, and EPON power-saving mechanism.
- Standard Committee
- COM/AccessCore-SC - Access and Core Networks Standards Committee
- Status
- Active Standard
- PAR Approval
- 2015-03-26
- Superseding
- 1904.1-2013
- Board Approval
- 2017-02-14
- History
-
- Published:
- 2017-07-24
Working Group Details
- Society
- IEEE Communications Society
- Standard Committee
- COM/AccessCore-SC - Access and Core Networks Standards Committee
- Working Group
-
1904_WG - Access Networks Working Group
- IEEE Program Manager
- Dalisa Gonzalez
Contact Dalisa Gonzalez - Working Group Chair
- Glen Kramer
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
P1904.4
Standard for Service Interoperability in 25 Gb/s and 50 Gb/s Ethernet Passive Optical Networks
This standard describes the system-level requirements needed to provide service-level, multi-vendor interoperability of Ethernet Passive Optical Network (EPON) equipment. The specifications complement the existing IEEE 802.3(TM) and IEEE 802.1Q(TM) standards, which enable the interoperability at the Physical Layer and Data Link Layer. Specifically included in this specification are: - 25G-EPON and 50G-EPON system-level interoperability specifications covering equipment functionality, traffic engineering, and service-level quality of service/class of service (QoS/CoS) mechanisms; - Management specifications covering equipment management, service management, and power utilization.
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
1904.1-Conformance01-2014
IEEE Standard for Conformance Test Procedures for Service Interoperability in Ethernet Passive Optical Networks, IEEE Std 1904.1(TM) Package A
This standard specifies a suite of conformance tests for system-level requirements of Ethernet Passive Optical Network (EPON) equipment, defined in IEEE 1904.1 Package A.
1904.1-Conformance02-2014
IEEE Standard for Conformance Test Procedures for Service Interoperability in Ethernet Passive Optical Networks, IEEE Std 1904.1(TM) Package B
This standard specifies a suite of conformance tests for system-level requirements of Ethernet Passive Optical Network (EPON) equipment, defined in IEEE 1904.1 Package B.
1904.1-Conformance03-2014
IEEE Standard for Conformance Test Procedures for Service Interoperability in Ethernet Passive Optical Networks, IEEE Std 1904.1(TM) Package C
This standard specifies a suite of conformance tests for system-level requirements of Ethernet Passive Optical Network (EPON) equipment, defined in IEEE 1904.1 Package C.
1904.2-2021
IEEE Standard for Control and Management of Virtual Links in Ethernet-based Subscriber Access Networks
Control mechanisms and management methods necessary to enable creation and operation of virtual links in Ethernet-based subscriber access networks are described. The key characteristics of the Virtual Link Control (VLC) mechanisms are: - The ability to transit Layer 2 bridges in a single IEEE 802 Media Access Control (MAC) domain to allow remote device management - Extensibility to accommodate new protocols and new types of devices - The ability to simultaneously send messages to multiple VLC-aware stations using broadcast or multicast addressing The message format, as well as processing operations at the stations participating in the VLC protocol, are described.
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
1904.1-2013
IEEE Standard for Service Interoperability in Ethernet Passive Optical Networks (SIEPON)
This standard describes the system-level requirements needed to ensure service-level, multi-vendor interoperability of Ethernet Passive Optical Network (EPON) equipment. The specifications complement the existing IEEE 802.3 and IEEE 802.1 standards, which ensure the interoperability at the Physical Layer (PHY) and Data Link Layer. Specifically included in this specification are - EPON system-level interoperability specifications covering equipment functionality, traffic engineering, and service-level quality of service/class of service (QoS/CoS) mechanisms; - Management specifications covering equipment management, service management, and EPON power-saving mechanism.
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards