The intent of this standard revision is to establish objective performance evaluation of wearable, cuffless blood pressure (BP) measuring devices. The standard is independent of the form of the device or the vehicle to which the device is attached or in which it is embedded. The standard is applicable to all types of wearable BP measurement devices that have different modes of operation (e.g., to measure short-term, long-term, snapshot, continuous, beat(s)-to-beat(s) BP, or BP variability). This standard is, however, limited to evaluation of devices that do not use a cuff during measurement and does not cover evaluation of all sphygmomanometers that are used with an occluding or inflatable cuff for the indirect determination of BP on the upper arm or wrist.
- Standard Committee
- EMB/Stds Com - Standards Committee
- Status
- Active PAR
- PAR Approval
- 2017-03-23
- Superseding
- 1708-2014
Working Group Details
- Society
- IEEE Engineering in Medicine and Biology Society
- Standard Committee
- EMB/Stds Com - Standards Committee
- Working Group
-
WC-BPM - Wearable Cuffless Blood Pressure Monitors
- IEEE Program Manager
- Malia Zaman
Contact Malia Zaman - Working Group Chair
- Yuanting ZHANG
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
1708-2014
IEEE Standard for Wearable Cuffless Blood Pressure Measuring Devices
IEEE Std 1708 establishes a normative definition of wearable cuffless blood pressure (BP) measuring devices and the objective performance evaluation of this kind of device. The standard is independent of the form of the device or the vehicle to which the device is attached or in which it is embedded. The standard is applicable to all types of wearable BP measurement devices including epidermal and unobtrusive BP devices that have different modes of operation (e.g., to measure short-term, long-term, snapshot, continuous, beat(s)-to-beat(s) BP, or BP variability). This standard is, however, limited to evaluation of devices that do not use a cuff during measurement and do not cover evaluation of all sphygmomanometers that are used with an occluding or inflatable cuff for the indirect determination of BP on the upper arm or wrist. This standard provides guidelines for manufacturers to qualify and validate their products, potential purchasers or users to evaluate and select prospective products, and health care professionals to understand the manufacturing practices on wearable BP devices.
1708a-2019
IEEE Standard for Wearable, Cuffless Blood Pressure Measuring Devices - Amendment 1
Clarifying and furthering the subject selection of the sample size in the clinical study; looking into the results of the validation study with respect to the patient's body position and activity level for their applicability to ambulatory patients; and addressing the issues of motion artifact is covered in the amendment.
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards