Active Standard

IEEE 1591.3-2020

IEEE Standard for Qualifying Hardware for Helically-Applied Fiber Optic Cable System (WRAP Cable)

Performance and testing specifications for hardware used on helically-applied cable systems (WRAP) in order to standardize testing, simplify procurement specifications, and improve product quality is established in this standard.

Sponsor Committee
PE/PSCC - Power System Communications and Cybersecurity
Learn More About PE/PSCC - Power System Communications and Cybersecurity
Status
Active Standard
PAR Approval
2017-05-18
Superseding
1591.3-2011
Board Approval
2020-12-03
History
Published:
2021-04-28

Working Group Details

Society
IEEE Power and Energy Society
Learn More About IEEE Power and Energy Society
Sponsor Committee
PE/PSCC - Power System Communications and Cybersecurity
Learn More About PE/PSCC - Power System Communications and Cybersecurity
Working Group
SC5-WG - Working Group for Fiber Optic Standards
IEEE Program Manager
Tom Thompson
Contact Tom Thompson
Working Group Chair
Delavar Khomarlou

Other Activities From This Working Group

Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.


P1591.4
Standard for Testing and Performance of Hardware for Optical Fiber Composite Overhead Phase Conductor (OPPC)

This standard describes the construction, mechanical and electrical performance, test requirements, environmental considerations, and acceptance criteria for qualifying hardware for use with Optical Fiber Composite Overhead Phase Conductor (OPPC).

Learn More About P1591.4

Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.


1138-2021
IEEE Standard for Testing and Performance of Optical Ground Wire (OPGW) for use on Electric Utility Power Lines

The performance, test requirements, procedures, and acceptance criteria for a transmission line overhead ground wire (a.k.a. shield wire, static wire, earth wire, skywire) with optical fibers commonly known as optical ground wire (OPGW) are covered in this standard. Functional requirements such as electrical, mechanical, optical fiber, environmental, and packaging, and test requirements related to design, installation, in-service, and maintenance, including routine tests are also covered.

Learn More About 1138-2021

1222-2019
IEEE Standard for Testing and Performance for All-Dielectric Self-Supporting (ADSS) Fiber Optic Cable for Use on Electric Utility Power Lines

The construction, mechanical, electrical, and optical performance, installation guidelines, acceptance criteria, test requirements, environmental considerations, and accessories for a nonmetallic, all-dielectric self-supporting (ADSS) fiber optic cable are covered by this standard. The ADSS cable is designed to be located primarily on overhead utility facilities.

Learn More About 1222-2019

1591.1-2023
IEEE Standard for Testing and Performance of Hardware for Optical Ground Wire (OPGW)

Hardware performance, test requirements, procedures, and acceptance criteria for a transmission line overhead ground wire (also known as shield wire, static wire, earth wire, and sky wire) with optical fibers commonly known as optical ground wire (OPGW) are covered. Functional requirements--such as electrical, mechanical, optical fiber, environmental, and test requirements related to design, installation, in service, and maintenance, including routine tests--are included.

Learn More About 1591.1-2023

1591.2-2017
IEEE Standard for Testing and Performance of Hardware for All-Dielectric Self-Supporting (ADSS) Fiber Optic Cable

Hardware performance, test requirements, procedures, and acceptance criteria for an all dielectric self-supporting overhead cable with optical fibers are covered in this standard. Functional requirements, such as electrical, mechanical, optical fiber, environmental and test requirements related to design, installation, in-service, and maintenance, including routine tests, are covered.

Learn More About 1591.2-2017

1594-2020
IEEE Standard for Helically-Applied Fiber Optic Cable Systems (WRAP) for Use on Overhead Utility Lines

An all-dielectric fiber optic cable (WRAP) designed to be helically wrapped around a conductor or other messenger on overhead power facilities is covered by this standard.

Learn More About 1594-2020

1595-2022
IEEE Standard for Testing and Performance for Optical Phase Conductor (OPPC) for Use on Electrical Utility Power Lines

The performance, test requirements, procedures, and acceptance criteria for an OPPC are covered in this standard. Optical phase conductor (OPPC) is a phase conductor with optical fibers for telecommunication purposes. Functional requirements, such as electrical, mechanical, optical fiber, environmental, and packaging, and test requirements related to design, installation, in-service, and maintenance, including routine tests, are also covered.

Learn More About 1595-2022

These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.


1222-2003
IEEE Standard for All-Dielectric Self-Supporting Fiber Optic Cable

SUMMARY: This standard covers construction, mechanical, electrical, and optical performance, installation guidelines, acceptance criteria, test requirements, environmental considerations, and accessories for an all-dielectric, non-metallic, self-supporting fiber optic (ADSS) cable. The ADSS cable is designed to be located primarily on overhead utility facilities. This standard provides both construction and performance requirements that insure within the guidelines of the standard that the dielectric capabilities of the cable components and maintenance of optical fiber integrity and optical transmissions are proper.

Learn More About 1222-2003

1222-2011
IEEE Standard for Testing and Performance for All-Dielectric Self-Supporting (ADSS) Fiber Optic Cable for Use on Electric Utility Power Lines

This standard covers the construction, mechanical, electrical and optical performance, installation guidelines, acceptance criteria, test requirements, and environmental considerations for an all-dielectric self-supporting fiber optic cable designed to be located on overhead electric power utility and telecommunications facilities. This does not include cables used for underground installations.

Learn More About 1222-2011

1591.3-2011
IEEE Standard for Qualifying Hardware for Helically-Applied Fiber Optic Cable Systems (WRAP Cable)

The purpose of this standard is to establish performance and testing specifications for hardware used on WRAP CABLE systems in order to standardize testing, simplify procurement specifications, and assure product quality.

Learn More About 1591.3-2011

1594-2008
IEEE Standard for Helically Applied Fiber Optic Cable Systems (Wrap Cable) for Use on Overhead Utility Lines

This standard covers an all-dielectric fiber optic (wrap) cable designed to be helically wrapped around a conductor or other messenger on overhead power facilities. This covers the mechanical, electrical, and optical performance, installation guidelines, acceptance criteria, test requirements, environmental considerations, packaging and shipping guidelines, and accessories.

Learn More About 1594-2008

These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.


No Inactive-Withdrawn Standards

These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.


1138-2009
IEEE Standard for Testing and Performance for Optical Ground Wire (OPGW) for Use on Electric Utility Power Lines

This standard covers the performance, test requirements, procedures, and acceptance criteria for a transmission line overhead ground wire (a.k.a. shield wire, static wire, earth wire, skywire) with optical fibers commonly known as optical ground wire (OPGW). An OPGW cable has the dual performance functions of a ground wire with telecommunications capabilities. This standard includes functional requirements such as electrical, mechanical, optical fiber, environmental and packaging, and test requirements related to design, installation, in-service, maintenance, including routine tests. This standard is not intended to supersede any established safety rules, codes, regulations, or practices associated with the use of OPGW cables. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

Learn More About 1138-2009

1138-2009/Cor 1-2014
IEEE Standard for Testing and Performance for Optical Ground Wire (OPGW) Use on Electric Utility Power Lines -- Corrigendum 1: Stress-Strain Temperature Correction, Aeolian Vibration Velocity

This corrigendum corrects the temperature associated with the Stress-Strain clause; and corrects the use of the term velocity in the Aeolian Vibration clause of IEEE Std 1138(TM)-2009.

Learn More About 1138-2009/Cor 1-2014

1591.1-2012
IEEE Standard for Testing and Performance of Hardware for Optical Ground Wire (OPGW)

Hardware performance, test requirements, procedures, and acceptance criteria for a transmission line overhead ground wire (also known as shield wire, static wire, earth wire, sky wire) with optical fibers commonly known as optical ground wire (OPGW) are covered. Functional requirements, such as electrical, mechanical, optical fiber, environmental, and test requirements related to design, installation, in service, and maintenance, including routine tests, are included.

Learn More About 1591.1-2012

Subscribe to our Newsletter

Sign up for our monthly newsletter to learn about new developments, including resources, insights and more.