The various important aspects that need to be considered for satisfactory long-term performance of room-temperature vulcanizing (RTV) silicone rubber high-voltage insulator coatings (HVIC) are outlined in the guide. Methods of application, pre-coated applications, maintenance issues on coated applications, factors affecting long-term performance, erosion resistance, temporary loss of hydrophobicity, aging, laboratory accelerated tests, partially coated insulation, and functional outdoor evaluation are described.
- Sponsor Committee
- DEI/SC - Standards Committee
Learn More About DEI/SC - Standards Committee - Status
- Active Standard
- PAR Approval
- 2017-06-15
- Superseding
- 1523-2002
- Board Approval
- 2018-10-23
- History
-
- Published:
- 2018-12-21
Working Group Details
- Society
- IEEE Dielectrics and Electrical Insulation Society
Learn More About IEEE Dielectrics and Electrical Insulation Society - Sponsor Committee
- DEI/SC - Standards Committee
Learn More About DEI/SC - Standards Committee - Working Group
-
OITC WG - DEIS Outdoor Insulation Technical Committee (DEI/SC/Outdoor Insulation)
- IEEE Program Manager
- Dalisa Gonzalez
Contact Dalisa Gonzalez - Working Group Chair
- Refat Ghunem
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
2652-2021
IEEE Guide for DC Inclined Plane Tracking and Erosion Test for Outdoor Insulation Applications
This guide is intended for a suitable use of dc voltages with the inclined plane tracking and erosion test for the evaluation of the tracking and erosion resistance of high voltage outdoor insulating materials.
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards