This standard provides recommendations to protect personnel in military environments against established adverse health effects associated with exposure to electric, magnetic, and electromagnetic fields, induced and contact current, and contact and arcing voltages over the frequency range of 0 Hz to 300 GHz. The recommendations, expressed as dosimetric reference limits (DRLs) and exposure reference levels (ERLs), incorporate safety factors that address uncertainties such as uncertainties in the experimental data, measurement uncertainties, and differences in threshold variability between individuals, so as to establish an appropriate margin of safety. The DRLs are expressed in terms of in situ electric field strength, specific absorption rate (SAR), and incident power density. The ERLs are expressed in terms of environmental exposure fields and power densities. In the case of contact current, however, only ERLs are provided. The DRLs and ERLs are intended to protect against established adverse human health effects associated with electrostimulation of tissue and partial and whole-body heating, but may not protect against electromagnetic interference (EMI) with implanted medical devices. This standard does not apply to exposure of informed volunteers in medical or scientific research studies subject to approval by institutional review boards for the use of human subjects, nor does it include exposure assessment techniques, risk management/safety program procedures, warning sign design, procedures for medical treatment of suspected overexposures, nor assessment of hazards associated with exposure of ordnance, fuel, or electro-explosive devices.
- Sponsor Committee
- BOG/ICES - International Committee on Electromagnetic Safety
Learn More About BOG/ICES - International Committee on Electromagnetic Safety - Status
- Active PAR
- PAR Approval
- 2019-05-21
- Superseding
- C95.1-2345-2014
Working Group Details
- Society
- IEEE SA Board of Governors
- Sponsor Committee
- BOG/ICES - International Committee on Electromagnetic Safety
Learn More About BOG/ICES - International Committee on Electromagnetic Safety - Working Group
-
SC3_4 - SC3/SC4 NATO WG
- IEEE Program Manager
- Patricia Roder
Contact Patricia Roder - Working Group Chair
- Roel Escobar
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
C95.1-2345-2014
IEEE Standard for Military Workplaces--Force Health Protection Regarding Personnel Exposure to Electric, Magnetic, and Electromagnetic Fields, 0 Hz to 300 GHz
Recommendations to protect personnel in military environments against established adverse health effects associated with exposure to electric, magnetic, and electromagnetic fields, induced and contact current, and contact and arcing voltages over the frequency range of 0 Hz to 300 GHz are provided in this standard. IEEE Std C95.1-2345(TM) was developed to replace North Atlantic Treaty Organization (NATO) Standardization Agreement (STANAG) 2345 (Edition 3), Evaluation and Control of Personnel Exposure to Radio Frequency Fields–3 kHz to 300 GHz, (13 February 2003). (The PDF of this standard is available at no charge at the compliments of the United States Navy, United States Air Force, and United States Army and the IEEEGETC95 program located at http://standards.ieee.org/getieee/C95/download/C95.1-2345-2014.pdf)
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards