The practices described in this guide apply to all instrument transformers, including capacitive voltage transformers (VTs) and linear couplers, irrespective of primary voltage or whether the primary windings are connected to, or are in, power circuits or are connected in the secondary circuits of other transformers as auxiliary current transformers (CTs) or VTs. This guide does not discuss the grounding of some applications. For example, grounding of gas insulated substations and metal clad switchgear is not discussed in this guide; the reader will find these topics addressed in IEEE Std 242. The grounding of circuits of core-balance CTs is also not discussed in this guide. The reader can also find this information in IEEE Std 242. Another issue that is not discussed in this guide is the practice of using separate safety and control grounds. For discussion on this topic, the reader is directed to IEEE Std 665.
- Standard Committee
- PE/PSRCC - Power System Relaying and Control
- Status
- Superseded Standard
- PAR Approval
- 1998-06-25
- Superseded by
- C57.13.3-2014
- Superseding
- C57.13.3-1983
- Board Approval
- 2005-11-08
- History
-
- ANSI Approved:
- 2006-03-20
- Published:
- 2006-05-08
Working Group Details
- Society
- IEEE Power and Energy Society
- Standard Committee
- PE/PSRCC - Power System Relaying and Control
- Working Group
-
C57.13.3_WG/i - (INACTIVE) Working Group for Grounding of Instrument Transformer Secondary Circuits and Cases
- IEEE Program Manager
- Malia Zaman
Contact Malia Zaman - Working Group Chair
- M Sachdev
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards