1301.1-1991 Metric Equipment Practice for Microcomputers - Convention-Cooled 2 mm Conn (PDF)
- Standard Committee
- C/MSC - Microprocessor Standards Committee
- Status
- Inactive-Withdrawn Standard
- Board Approval
- 1991-06-27
- History
-
- Withdrawn:
- 2007-01-18
- ANSI Approved:
- 1992-04-14
- Published:
- 1991-11-30
- Reaffirmed:
- 2001-06-14
Working Group Details
- Society
- IEEE Computer Society
- Standard Committee
- C/MSC - Microprocessor Standards Committee
- Working Group
-
1301_WG - 1301 Working Group
- IEEE Program Manager
- Tom Thompson
Contact Tom Thompson - Working Group Chair
- Ralph Kearfott
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
1301-1991
IEEE Standard for a Metric Equipment Practice for Microcomputers - Coordination Document
Administratively withdrawn January 2007 The metric mechanical coordination of microcomputer components, including the cabinet, rack, subracks, printed boards, and common connector-dependent dimensions for connector pitches of 2.5, 2.0, 1.5, 1.0, and 0.5 mm is addressed. This generic standard may be applied in all fields of electronics where equipment and installations are required to conform to a metric modular order. This choice of coordination dimensions for the mechanical structure for heights, widths, and depths lies within a homogeneous, metric, modular, three-dimensional grid as specified in IEC 917. The intent is to provide a single metric equipment practice for worldwide use.
1301.2-1993
IEEE Recommended Practices for the Implementation of a Metric Equipment Practice (IEEE Std 1301-1991)
Recommendations provide guidance in the implementation of the generic standard, IEEE Std 1301-1991, and the connector-related standards, such as IEEE Std 1301.1-1991 and IEEE Std 1301.3-1992. This recommended practice may be applied in all fields of electronics where equipment and installations are required to conform to a metric modular order. The IEEE 1301 metric equipment practices are in accordance with IEC 917 (1988) and IEC 917-0 (1989), including cabinet, rack, subracks, printed boards, and common connector-dependent dimensions for connector pitches of 2.5, 2.0, 1.5, 1.0, and 0.5 mm.
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
1301.3-1992
IEEE Standard for a Metric Equipment Practice for Microcomputers - Convection-Cooled with 2.5 mm Connectors
Recommendations provide guidance in the implementation of the generic standard, IEEE Std 1301-1991, and the connector-related standards, such as IEEE Std 1301.1-1991 and IEEE Std 1301.3-1992. This recommended practice may be applied in all fields of electronics where equipment and installations are required to conform to a metric modular order. The IEEE 1301 metric equipment practices are in accordance with IEC 917 (1988) and IEC 917-0 (1989), including cabinet, rack, subracks, printed boards, and common connector-dependent dimensions for connector pitches of 2.5, 2.0, 1.5, 1.0, and 0.5 mm.
1301.4-1996
IEEE Standard for a Metric Equipment Practice for Microcomputers - Coordination Document for Mezzanine Cards
This standard establishes the metric modular order and coordination dimensions for mezzanine cards for use on host modules.