IEEE C62.82.1-2010 - IEEE Standard for Insulation Coordination--Definitions, Principles, and Rules

Standard

Standard Details

Revision of IEEE Std 1313.1-1996. The procedure for selection of the withstand voltages for equipment phase-to-ground and phase-to-phase insulation systems is specified. A list of standard insulation levels, based on the voltage stress to which the equipment is being exposed, is also identified. This standard applies to three-phase ac systems above 15 kV.

Standards Committee	PE/SPDHV - Surge Protective Devices/High Voltage
Status	Inactive-Reserved
Board Approval	2010-12-08
History	Published Date:2011-04-15 Withdrawn Date:2021-03-25

Additional Resources Details

PAR	Approved PAR

Working Group Details

Working Group	HV3.4.18 - 3.4.18 Preferred Voltages & Insulation Coordination Std Maintenance WG
Working Group Chair	Iuda Morar
Standards Committee	PE/SPDHV - Surge Protective Devices/High Voltage
Society	IEEE Power and Energy Society
IEEE Program Manager	Christian Orlando
Active Projects	Active IEEE PC62.82.2 - IEEE Draft Guide for the Application of Insulation Coordination The calculation method for selection of phase-to-ground and phase-to-phase insulation withstand voltages for equipment is presented. This guide gives methods for insulation coordination of different air-insulated systems like transmission lines and substations. The methods of analysis are illustrated by practical examples.
Existing Standards	Inactive-Withdrawn IEEE 1312-1993 - IEEE Standard Preferred Voltage Ratings for Alternating-Current Electrical Systems and Equipment Operating at Voltages Above 230 kV Nominal Perferred voltage ratings above 230 kV nominal for alternating-current (ac) systems and equipment are provided, along with definitions of various types of system voltages.
	Superseded IEEE 1313.1-1996 - IEEE Standard for Insulation Coordination - Definitions, Principles and Rules The procedure for selection of the withstand voltages for equipment phase-to-ground and phase-to-phase insulation systems is specified. A list of standard insulation levels, based on the voltage stress to which the equipment is being exposed, is also identified. This standard applies to three-phase ac systems above 1 kV.
	Inactive-Reserved IEEE 1313.2-1999 - IEEE Guide for the Application of Insulation Coordination The calculation method for selection of phase-to-ground and phase-to-phase insulation withstand voltages for equipment is presented. This guide gives methods for insulation coordination of different air-insulated systems like transmission lines and substations. The methods of analysis are illustrated by practical examples.