Working Group Details
LV3.6.6 - 3.6.6 LV AC Power Circuit Protective Devices WG
|Working Group Chair||
|IEEE Program Manager|
PC62.72a - IEEE Draft Guide for the Application of Surge Protective Devices for Low Voltage (1000 Volts or Less) AC Power Circuits Amendment: SPD Disconnector Application Considerations and Coordination for use in Low Voltage AC (1000 V or Less, 50 or 60 Hz) Power Circuits
The scope of this amendment is to define the application considerations for SPD Disconnectors and the coordination of these devices in Low Voltage AC Power Circuits. Application consideration details, potential issues and recommendations are provided.
C62.62-2000 - IEEE Standard Test Specifications for Surge Protective Devices for Low Voltage AC Power Circuits
" This standard establishes methods for testing and measuring the performance charac-teristics for surge-protective devices used in low-voltage ac power circuits. Definitions are statedthat apply specifically to surge-protective devices. The testing requirements are categorized intotwo groups, in which a minimum set of basic tests (BTs) are prescribed for all surge-protectivedevices within the scope of its documents, supplemented by additional tests (ATs) that might beneeded to establish particular application requirements. "
C62.62-2010 - IEEE Standard Test Specifications for Surge-Protective Devices (SPDs) for Use on the Load Side of the Service Equipment in Low Voltage (1000 V and less) AC Power Circuits
Surge-protective devices (SPDs) intended to be installed on the load side of the service equipment connected to 50 Hz or 60 Hz AC power circuits rated at 1000 V (root mean squared [rms]) or less are the focus of this standard. Performance characteristics and standard methods for testing and rating are established for these devices, which may be composed of any combination of components. The tests in this standard are aimed at providing comparisons among the variety of SPDs available.
C62.72-2016 - IEEE Guide for the Application of Surge-Protective Devices for Use on the Load Side of Service Equipment in Low-Voltage (1000 V or Less, 50 Hz or 60 Hz) AC Power Circuits
Guidance is provided to specifiers, users and manufacturers of surge-protective devices (SPDs) about the application considerations of SPDs to power distribution systems and associated equipment. This guide applies to SPDs to be connected to the load side of the service equipment (and main over current protective device) of 50 Hz or 60 Hz ac power circuits rated 1000 V ac or less. Information on surge origins, effects of surges, number and magnitude of surge events, location categories, power distribution system (PDS) configurations, grounding and bonding, SPD specifications, SPD ratings, SPD characteristics, SPD lifetime, interactions of SPDs with a PDS, and SPD coordination considerations are provided in the guide.
C62.62-2018 - IEEE Standard Test Specifications for Surge-Protective Devices (SPDs) for Use on the Load Side of the Service Equipment in Low-Voltage (1000 V and Less) AC Power Circuits
Recommended practices for the engineering and design of flexible and rigid bus connections for bus and equipment in electric power substations located in seismically active areas are provided in this document.