The method requires a suitable Artificial Mouth. It also specifies a standard Artificial Ear, standard circuits comprising direct-current power feed and connecting loops, and a standard pressure microphone. 2.3 This Standard is intended for use in measuring the transmission characteristic over the frequency range most useful for speech, e.g. 150 to 5000 hertz. It is to be used for single-frequency measurements and for measurements with continuously varying frequencies such as slow sweeps and warble bands. 2.4 It is suitable also for measuring the transmission performance of conventional telephone sets equipped with handsets using carbon transmitters and used with 2-wire circuits. It is not intended to be applicable to special devices such as noise-exclusion transmitters, distant-talking transmitters, insert-type receivers, or noise-exclusion receivers equipped with large ear pads. 2.5 This Standard is based on a standard pressure microphone to measure the sound field produced by the Artificial Mouth and to measure the pressure developed in the Artificial Ear. 2.6 Drawings and test procedures as well as other pertinent information have been included as an aid to designers in setting up the tests.
- Superseded Standard
- Superseded by
Working Group Details
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards