Inactive-Withdrawn Standard

IEEE C62.32-2004

IEEE Standard Test Methods for Low-Voltage Air Gap Surge-Protective Device Components (Excluding Valve and Expulsion Types)

This standard applies to air gaps for overvoltage protection applications on systems with operating voltages equal to or less than 600 V rms. This standard contains a series of standard tests for determining the electrical characteristics of these air gap devices. This standard's test criteria and definitions provide a common engineering language beneficial to users and manufacturers of air gap surge protective devices.

Sponsor Committee
PE/SPDLV - Surge Protective Devices/Low Voltage
Learn More About PE/SPDLV - Surge Protective Devices/Low Voltage
Status
Inactive-Withdrawn Standard
PAR Approval
2002-08-15
Superseding
C62.32-1981
Board Approval
2004-12-08
History
Withdrawn:
2010-01-09
ANSI Approved:
2005-04-12
Published:
2005-05-11

Working Group Details

Society
IEEE Power and Energy Society
Learn More About IEEE Power and Energy Society
Sponsor Committee
PE/SPDLV - Surge Protective Devices/Low Voltage
Learn More About PE/SPDLV - Surge Protective Devices/Low Voltage
Working Group
LV3.6.1 - 3.6.1 LV Gap Type Surge Protective Device Components WG
IEEE Program Manager
Christian Orlando
Contact Christian Orlando
Working Group Chair
Hans-Wo Oertel

Other Activities From This Working Group

Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.


No Active Projects

Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.


C62.31-2020

IEEE Standard for Test Methods and Preferred Values for Low-Voltage Gas Discharge Tube Surge-Protective Components

This standard applies to low-voltage gas discharge tube (GDT ) surge-protective components for application on systems with voltages less than or equal to 1000 V rms or 1500 V dc. These protective components are designed to limit voltage surges on balanced or unbalanced communication circuits and on power circuits operating from dc to 420 Hz. This standard contains a series of standard test criteria for determining the electrical characteristics and ratings of gas discharge tube surge-protective components.

Learn More About C62.31-2020

These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.


C62.31-1987

IEEE Standard Test Specification for Gas-Tube Surge Protective Devices

Superseded. Gas-tube surge-protective devices for application on systems with voltages 1000 V rms or 1200 V dc are covered. These protective devices are designed to limit voltage surges on balanced or unbalanced communication circuits and on power circuits operating from dc to 420 Hz. Test criteria for determining the electrical characteristics of these devices are provided.

Learn More About C62.31-1987

C62.31-2006

IEEE Standard Test Methods for Low-Voltage Gas-Tube Surge-Protective Device Components

This standard applies to gas-tube surge-protective devices for application on systems with voltages, 1000 V rms or 1200 V dc.

Learn More About C62.31-2006

C62.32-1981

IEEE Standard Test Specifications for Low-Voltage Air Gap Surge-Protective Devices (Excluding Valve and Expulsion Type Devices)

Air gaps for overvoltage protection applications on systems with operating voltages equal to or less than 600 V rms are covered. These protective devices are designed for limiting the voltages on balanced or unbalanced communication, power, and signaling circuits. A series of standard design tests for determining the electrical characteristics of these air gap devices is specified. The tests provide a means of comparison among various air gap surge-protective devices.

Learn More About C62.32-1981

These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.


No Inactive-Withdrawn Standards

These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.


No Inactive-Reserved Standards
Subscribe to our Newsletter

Sign up for our monthly newsletter to learn about new developments, including resources, insights and more.