This document has been prepared as a guide for technical committees to use when standards are being prepared or revised, with the object of obtaining consistency, as far as practicable, among the standards for various kinds of electric equipment, which must often operate under the same service conditions. Service conditions are specified to give the limiting conditions of operation for which standard equipment is designed. For example, ambient temperature values should be selected which, in combination with standard temperature rises, limit total insulation temperatures to suitable values. By specifying a limiting ambient value in service conditions, a readily usable simple means of stating conditions for which standard ratings are suitable is provided. This document consists of two parts. As far as possible selections should be made from Part I for the statement of service conditions for particular equipment standards. For uniformity it is suggested that the exact wording be used where it applies. Part II covers application and testing. Selections from this part are recommended for inclusion as supplementary information to specific standards where applicable and desirable.
- Sponsor Committee
- BOG/SESCom/SC04 - SC04 - Electrical Insulation
Learn More About BOG/SESCom/SC04 - SC04 - Electrical Insulation - Status
- Inactive-Withdrawn Standard
- Board Approval
- 1969-12-01
- History
-
- Withdrawn:
- 1993-03-18
- ANSI Approved:
- 1970-01-01
- Published:
- 1969-12-31
Working Group Details
- Society
- IEEE-SASB Coordinating Committees
- Sponsor Committee
- BOG/SESCom/SC04 - SC04 - Electrical Insulation
Learn More About BOG/SESCom/SC04 - SC04 - Electrical Insulation
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards