The following general methods of test are either discussed or referred to in this publication:Low-frequency, low- and high-voltage losscharacteristic measurements. The measurement at power frequencies of power factor, dissipation factor or watts loss and capacitance or charging current; or equivalent quantities which define the electric circuit constants of the test specimen in the voltage range of approximately 80 volts to 50 kilovolts or higher. (2) Alternating-voltage corona measurements. The determination of the presence of corona discharge in the test specimen, usually related to the magnitude of the applied power-frequency voltage. The presence and the severity of corona are usually determined by indirect means; for example, by the resultant increase in dielectric loss or by the measurement of high-frequency components in the current (3) Alternating-voltage distribution measurements. The measurement of the potential of the terminal electrodes and of one or more defined points between the high-and low-voltage electrodes of the test specimen, usually with applied voltage of power frequency.
- Status
- Superseded Standard
- Superseding
- 62-1956
- History
-
- Published:
- 1957-11-30
Working Group Details
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
No Inactive-Reserved Standards