IEEE 1785.2-2016 - IEEE Standard for Rectangular Metallic Waveguides and Their Interfaces for Frequencies of 110 GHz and Above?Part 2: Waveguide Interfaces

Standard

Active

IEEE 1785.2-2016 - IEEE Standard for Rectangular Metallic Waveguides and Their Interfaces for Frequencies of 110 GHz and Above—Part 2: Waveguide Interfaces

Buy This Standard

Access Via Subscription

Standard Details

Specifications for rectangular waveguide interfaces are given in this standard. It considers the tolerances of the waveguide interface dimensions and the effect these have on the electrical properties (in terms of reflection coefficient) of the waveguide.

Sponsor Committee	MTT/SCC - Standards Coordinating Committee
Status	Active
Board Approval	2016-03-03
History	Published Date:2016-09-09

Additional Resources Details

PAR	Approved PAR

Working Group Details

Working Group	WMSMW_WG - Waveguides for Millimeter and Sub-Millimeter Wavelengths
Working Group Chair	Nick Ridler
Sponsor Committee	MTT/SCC - Standards Coordinating Committee
Society	MTT - IEEE Microwave Theory and Techniques Society
IEEE Program Manager	Vanessa Lalitte
Existing Standards	Active 1785.1-2012 - IEEE Standard for Rectangular Metallic Waveguides and Their Interfaces for Frequencies of 110 GHz and Above?Part 1: Frequency Bands and Waveguide Dimensions Specifications for the waveguide (including aperture dimensions, frequency range, cutoff frequency, etc.) are given in this standard. This standard considers the tolerances of the waveguide aperture dimensions and the effect these have on the electrical properties (in terms of return loss, transmission loss, etc.) of the waveguide.
	Active 1785.3-2016 - IEEE Recommended Practice for Rectangular Metallic Waveguides and Their Interfaces for Frequencies of 110 GHz and Above?Part 3: Recommendations for Performance and Uncertainty Specifications Recommendations for summarizing the performance and the expected uncertainty of the reflection coefficient of rectangular-waveguide apertures and interfaces for 110 GHz and above are provided in this recommended practice. The information provided also facilitates the development of a complete uncertainty analysis for the performance of rectangular waveguide interfaces. For example, it includes the dimensional information essential for calculating the uncertainty of both reflection and transmission coefficients through interfaces provided by different manufacturers if both follow this recommended practice.