Internet of Things Related Standards In Development

Internet of Things Related Standards In Development

Below is a partial listing of IEEE standards in development related to the Internet of Things.

IEEE P802.11af™ – IEEE Draft Standard for Information Technology – Telecommunications and Information Exchange Between Systems – Local and Metropolitan Area Networks – Specific Requirements – Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications; Amendment: TV White Spaces Operation

IEEE P802.11ah™ – IEEE Draft Standard for Information Technology – Telecommunications and Information Exchange Between Systems – Local and Metropolitan Area Networks – Specific Requirements – Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications: Amendment- Sub 1 GHz License-Exempt Operation

IEEE P802.11ai™ – IEEE Draft Standard for Information Technology – Telecommunications and Information Exchange Between Systems – Local and Metropolitan Area Networks – Specific Requirements – Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications: Amendment- Fast Initial Link Setup

IEEE P802.15.4j™– IEEE Draft Standard for Information Technology – Telecommunications and Information Exchange Between Systems – Local and Metropolitan Area Networks – Specific Requirements – Part 15.4: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low Rate Wireless Personal Area Networks (WPANs) Amendment: Alternative Physical Layer Extension to support Medical Body Area Network (MBAN) services operating in the 2360-2400 MHz band

IEEE P802.15.4k™ – IEEE Draft Standard for Local and Metropolitan Area Networks – Part 15.4: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low Rate Wireless Personal Area Networks (WPANs) Amendment – Physical Layer (PHY) Specifications for Low Energy, Critical Infrastructure Monitoring Networks (LECIM)

IEEE P802.15.4m™- IEEE Draft Standard for Local and Metropolitan Area Networks Part 15.4: Low Rate Wireless Personal Area Networks (LR-WPANs) Amendment: TV White Space Between 54 MHz and 862 MHz Physical Layer

IEEE P802.15.4n™ – IEEE Draft Standard for Local and metropolitan area networks–Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs) Amendment: Physical Layer Utilizing Dedicated Medical Bands in China

IEEE P802.15.4p™ – IEEE Draft Standard for Local and metropolitan area networks–Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs) Amendment: Positive Train Control (PTC) System Physical Layer

IEEE P802.15.4q™ – IEEE Draft Standard for Local and Metropolitan Area Networks – Part 15.4: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low Rate Wireless Personal Area Networks (WPANs) Amendment – Physical Layer (PHY) Specifications for Low Energy, Critical Infrastructure Monitoring Networks (LECIM)

IEEE P802.15.8™ – IEEE Draft Standard for Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Peer Aware Communications (PAC)

IEEE P802.15.9™ – IEEE Draft Recommended Practice for Transport of Key Management Protocol (KMP) Datagrams

IEEE P802.16n™ – IEEE Draft Standard for local and metropolitan area networks Part 16: Air Interface for Broadband Wireless Access Systems

IEEE P802.21d™ – IEEE Draft Standard for Local and metropolitan area networks — Part 21: Media Independent Handover Services Amendment: Multicast Group Management

IEEE P802.22b™ – IEEE Draft Standard for Information Technology–Telecommunications and information exchange between systems Wireless Regional Area Networks (WRAN)–Specific requirements Part 22: Cognitive Wireless RAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications: Policies and Procedures for Operation in the TV Bands Amendment: Enhancement for Broadband Services and Monitoring Applications

IEEE P1451.2™ – IEEE Draft Standard for a Smart Transducer Interface for Sensors and Actuators – Serial Point-to-Point Interface

IEEE P1451.4a™ – IEEE Draft Standard for A Smart Transducer Interface for Sensors and Actuators–Mixed-Mode Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats – Amendment

IEEE P1547.7™ – IEEE Draft Guide to Conducting Distribution Impact Studies for Distributed Resource Interconnection

IEEE P1547.8™ – IEEE Draft Recommended Practice for Establishing Methods and Procedures that Provide Supplemental Support for Implementation Strategies for Expanded Use of IEEE Standard 1547

IEEE P1609.0™– IEEE Draft Guide for Wireless Access in Vehicular Environments (WAVE) – Architecture

IEEE P1609.5™ – IEEE Draft Standard for Wireless Access in Vehicular Environments (WAVE) – Communication Manager

IEEE P1704™ – IEEE Draft Standard for Utility Industry End Device Communications Module

IEEE P1705™ – IEEE Draft Standard for Compliance Testing to Utility Industry Metering Communications Protocol Standards

IEEE P1828™ – IEEE Draft Standard for Systems with Virtual Components

IEEE P1856™ – IEEE Draft Standard Framework for Prognostics and Health Management of Electronic Systems

IEEE P1888.1™ – IEEE Draft Standard for a Ubiquitous Community Network : Control and Management

IEEE P1888.2™ – IEEE Draft Standard for Ubiquitous Green Community Control Network: Heterogeneous Networks Convergence and Scalability

IEEE P1888.3™ – IEEE Draft Standard for Ubiquitous Green Community Control Network: Security

IEEE P1900.7™ – IEEE Draft Standard for Radio Interface for White Space Dynamic Spectrum Access Radio Systems Supporting Fixed and Mobile Operation

IEEE P1901.2™ – IEEE Draft Standard for Low Frequency (less than 500 kHz) Narrow Band Power Line Communications for Smart Grid Applications

IEEE P1904.1™-Conformance 01 – IEEE Draft Standard for Conformance Test Procedures for Service Interoperability in Ethernet Passive Optical Networks, IEEE Std 1904.1 Package A-Conformance 01- IEEE Draft Standard for Conformance Test Procedures for Service Interoperability in Ethernet Passive Optical Networks, IEEE Std 1904.1 Package A

IEEE P1904.1™-Conformance 02 – IEEE Draft Standard for Conformance Test Procedures for Service Interoperability in Ethernet Passive Optical Networks, IEEE Std 1904.1 Package B

IEEE P1904.1™-Conformance 03 – IEEE Draft Standard for Conformance Test Procedures for Service Interoperability in Ethernet Passive Optical Networks, IEEE Std 1904.1 Package C

IEEE P1907.1™ – IEEE Draft Standard for Network-Adaptive Quality of Experience (QoE) Management Scheme for Real-Time Mobile Video Communications

IEEE P2030.1™ – IEEE Draft Guide for Electric-Sourced Transportation Infrastructure

IEEE P2301™ – IEEE Draft Guide for Cloud Portability and Interoperability Profiles (CPIP)

IEEE P2302™ – IEEE Draft Standard for Intercloud Interoperability and Federation (SIIF)

IEEE P3333.1™ – IEEE Draft Standard for the Quality Assessment of Three Dimensional (3D) Displays, 3D Contents and 3D Devices based on Human Factors

IEEE P3333.2™ – IEEE Draft Standard for Three-Dimensional Model Creation Using Unprocessed 3D Medical Data

IEEE P11073-10423™ – IEEE Draft Standard for Health informatics -Personal health device communication – Device specialization – Sleep Monitor

IEEE P11073-10424™ – IEEE Draft Standard for Health informatics – Personal health device communication – Device specialization – Sleep apnea breathing therapy equipment

IEEE P11073-10419™ – IEEE Draft Standard for Health informatics – Personal health device communication – Device specialization – Insulin pump

IEEE P21451-001™ – IEEE Draft Recommended Practice for Signal Treatment Applied to Smart Transducers

IEEE P21451-1™ – IEEE Draft Standard for Smart Transducer Interface for Sensors and Actuators – Common Network Services

IEEE P21451-1-4™ – IEEE Draft Standard for a Smart Transducer Interface for Sensors, Actuators, and Devices – eXtensible Messaging and Presence Protocol (XMPP) for Networked Device Communication

IEEE P62704-4™ – IEEE Draft Standard for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices, 30 MHz – 6 GHz: General Requirements for Using the Finite Element Method (FEM) for SAR Calculations and Specific Requirements for Modeling Vehicle-Mounted Antennas and Personal Wireless Devices

Newswire

Sign up for our monthly newsletter to learn about new developments, including resources, insights and more.