Superseded Standard

IEEE C62.11-1987

IEEE Standard for Metal-Oxide Surge Arresters for AC Power Circuits

Metal-oxide surge arresters designed to repeatedly limit the voltage surges on 48 Hz to 62 Hz power circuits by passing surge discharge current and automatically limiting the flow of system power current are discussed. This standard applies to devices for separate mounting and to those supplied integrally with other equipment.

Sponsor Committee
PE/SPDC - Surge Protective Devices Committee
Learn More
Status
Superseded Standard
Superseded by
C62.11-1993
Board Approval
1985-12-12
History
ANSI Approved:
1987-01-16
Published:
1987-07-24

Working Group Details

Society
IEEE Power and Energy Society
Learn More
Sponsor Committee
PE/SPDC - Surge Protective Devices Committee
Learn More
Working Group
HV3.3.11 - 3.3.11 Continuous Revision of C62.11 Standard WG
Learn More
IEEE Program Manager
Christian Orlando
Contact
Working Group Chair
Timothy Smith

P2770

60099-11 Surge Arresters - Part 11: Metal-Oxide Line Surge Arresters to Protect Power Line Insulation

This standard defines the design/type tests, routine test, acceptance tests and classifications for line surge arresters (LSA). The arresters covered by this standard are Non-Gapped Line Arresters (NGLA) and Externally Gapped Line Arresters (EGLA) for use on AC or DC transmission and distribution power lines with system voltages > 1kV.

Learn More

PC62.11

Standard for Metal-Oxide Surge Arresters for AC Power Circuits (>1 kV)

This standard applies to metal-oxide surge arresters (MOSAs) designed to repeatedly limit the voltage surges on 48 Hz to 62 Hz power circuits (>1000 V) by passing surge discharge current and automatically limiting the flow of system power current. This standard applies to devices for separate mounting and to devices supplied integrally with other equipment.

Learn More

C62.11-2020

IEEE Standard for Metal-Oxide Surge Arresters for AC Power Circuits (>1 kV)

Metal-oxide surge arresters (MOSAs) designed to repeatedly limit the voltage surges on 48 Hz to 62 Hz power circuits (>1000 V) by passing surge discharge current and automatically limiting the flow of system power current are addressed in this standard. This standard applies to devices for separate mounting and to devices supplied integrally with other equipment. The tests demonstrate that an arrester is able to survive the rigors of reasonable environmental conditions and system phenomena while protecting equipment and/or the system from damaging overvoltages caused by lightning, switching, and other undesirable surges.

Learn More

C62.11-1993

IEEE Standard for Metal-Oxide Surge Arresters for Alternating Current Power Circuits

Metal-oxide surge arresters designed to repeatedly limit the voltage surges on 48-Hz to 62-Hz power circuits by passing surge discharge current and automatically limiting the flow of system power current,are discussed. This standard applies to devices for separate mounting and to those supplied integrally with other equipment.

Learn More

C62.11-1999

IEEE Standard for Metal-Oxide Surge Arresters for Alternating Current Power Circuits (>1KV)

Superseded by IEEE Std C62.11-2005. Metal-oxide surge arresters designed to repeatedly limit the voltage surges on 48u201362 Hz power circuits (>1 kV) are covered in this standard. These devices operate by discharging surge current. Devices for separate mounting and those supplied integrally with other equipment are also discussed.

Learn More

C62.11-2005

IEEE Standard for Metal-Oxide Surge Arresters for AC Power Circuits (> 1 kV)

This standard applies to metal-oxide surge arresters (MOSAs) designed to repeatedly limit the voltage surges on 48 Hz to 62 Hz power circuits (>1000 V) by passing surge discharge current and automatically limiting the flow of system power current. This standard applies to devices for separate mounting and to devices supplied integrally with other equipment. The tests demonstrate that an arrester can survive the rigors of reasonable environmental conditions and system phenomena while protecting equipment and/or the system from damaging overvoltages caused by lightning, switching, and other undesirable surges.

Learn More

C62.11-2012

IEEE Standard for Metal-Oxide Surge Arresters for AC Power Circuits (>1 kV)

Metal-oxide surge arresters (MOSAs) designed to repeatedly limit the voltage surges on 48 Hz to 62 Hz power circuits (> 1000 V) by passing surge discharge current and automatically limiting the flow of system power current are addressed in this standard. This standard applies to devices for separate mounting and to devices supplied integrally with other equipment. The tests demonstrate that an arrester is able to survive the rigors of reasonable environmental conditions and system phenomena while protecting equipment and/or the system from damaging overvoltages caused by lightning, switching, and other undesirable surges.

Learn More

C62.11a-2008

IEEE Standard for Metal-Oxide Surge Arresters for AC Power Circuits (>1 kV) Amendment 1: Short-Circuit Tests for Station, Intermediate, and Distribution Arresters

Metal-oxide surge arresters designed to repeatedly limit the voltage surges on 48 Hz to 62 Hz power circuits (>1000 V) by passing surge discharge current and automatically limiting the flow of system power current applies to this amendment. This amendment covers devices for separate mounting and to those supplied integrally with other equipment. The tests demonstrate that an arrester can survive the rigors of reasonable environmental conditions and system phenomena, while, at the same time, protect equipment and/or the system from damaging overvoltages caused by lightning, switching, or other undesirable surges.

Learn More

No Inactive-Withdrawn Standards
No Inactive-Reserved Standards
Subscribe

Stay up to date about new developments, including resources, insights and more.