This project establishes a standard for wireless communication methods and data format for transducers (sensors and actuators). The standard defines a TEDS based on the IEEE 1451 concept and protocols to access TEDS and transducer data. It adopts necessary wireless interfaces and protocols to facilitate the use of technically differentiated, existing wireless technology solutions. It does not specify transducer design, signal conditioning, wireless system physical design or use, or use of TEDS.
- Standard Committee
- IM/ST - TC9 - Sensor Technology
- Joint Sponsors
-
IES/IES
- Status
- Active PAR
- PAR Approval
- 2017-12-06
- Superseding
- 1451.5-2007
Working Group Details
- Society
- IEEE Instrumentation and Measurement Society
- Standard Committee
- IM/ST - TC9 - Sensor Technology
- Working Group
-
WS - Wireless Sensor Working Group
- IEEE Program Manager
- Vanessa Lalitte
Contact Vanessa Lalitte - Working Group Chair
- Kang Lee
Other Activities From This Working Group
Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.
No Active Projects
Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.
No Active Standards
These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.
No Superseded Standards
These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.
No Inactive-Withdrawn Standards
These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.
1451.5-2007
IEEE Standard for a Smart Transducer Interface for Sensors and Actuator -- Wireless Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats
This standard defines a wireless interface for sensors. It specifies radio-specific protocols for this wireless interface. It defines communication modules that connect the wireless transducer interface module (WTIM) and the network capable applications processor (NCAP) using the radio-specific protocols. It also defines the transducer electronic data sheets (TEDS) for the radio-specific protocols.