Standard Icon

Wired and Wireless Communications Standards

Displaying results 241 - 280 of 300
Standard Name
Status Help less all
802.15.4d-2009 - Specific requirements-- Part 15.4: Amendment 3: Alternative Physical Layer Extensionto support the Japanese 950 MHz bandsThis amendment to IEEE Std 802.15.4-2006 is limited to defining a new PHY and such changes to the MAC as are necessary to support a new frequency... Superseded Standard
802.15.4c-2009 - Specific requirements-- Part 15.4: Amendment 2: Alternative Physical Layer Extension to support one or more of the Chinese 314-316 MHz, 430-434 MHz, and 779-787 MHz bandsThis amendment defines alternate PHY and modifications to the MAC needed to support the PHY that complies with the applicable Chinese regulations,... Superseded Standard
802.15.4a-2007 - Specific requirements-- Part 15.4: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low-Rate Wireless Personal Area Networks (WPANs): Amendment 1: Add Alternate PHYsThis standard defines the protocol and compatible interconnection for data communication devices using low-data-rate, low-power and low-complexity... Superseded Standard
802.15.5-2009 - Recommended Practice for Information technology-- Specific requirements Part 15.5: Mesh Topology Capability in Wireless Personal Area Networks (WPANs)This IEEE recommended practice defines the architectural framework that enables WPAN devices to promote interoperable, stable, and scaleable... Active Standard
802.16-2001 - Part 16: Air Interface for Fixed Broadband Wireless Access SystemsThis standard specifies the air interface of fixed (stationary) point-to-multipoint broadband wireless access systems providing multiple services.... Superseded Standard
802.16-2004 - Part 16: Air Interface for Fixed Broadband Wireless Access SystemsThis standard specifies the air interface of fixed broadband wireless access (BWA) systems supporting multimedia services. The medium access... Superseded Standard
802.16h-2010 - Part 16: Air Interface for Broadband Wireless Access Systems Amendment 2: Improved Coexistence Mechanisms for License-Exempt OperationSuperseded by IEEE Std 802.16-2012. This amendment specifies improved mechanisms, as policies and medium access control enhancements, to enable... Superseded Standard
802.16m-2011 - Part 16: Air Interface for Broadband Wireless Access Systems Amendment 3: Advanced Air InterfaceThis amendment specifies the WirelessMAN-Advanced Air Interface, an enhanced air interface designated as "IMT-Advanced" by the International... Superseded Standard
802.16-2009 - Part 16: Air Interface for Broadband Wireless Access SystemsThis standard specifies the air interface, including the medium access control layer (MAC) and physical layer (PHY), of combined fixed and mobile... Superseded Standard
802.16.2-2001 - Recommended Practice for Recommended Practice for Coexistence of Fixed Broadband Wireless Access SystemsThis IEEE recommended practice provides guidelines for minimizing interference in fixed broadband wireless access (BWA) systems operating in the... Superseded Standard
802.16.2-2004 - Recommended Practice for Coexistence of Fixed Broadband Wireless Access SystemsIEEE Std 802.16.2 provides the IEEE recommended practice for local and metropolitan area networks with regard to the coexistence of fixed... Active Standard
802.16-2001/Conformance01-2003 - Conformance to 802.16 -- Part 1: Protocol Implementation Conformance Statement (PICS) Proforma for 10-66 GHz WirelessMAN-SC Air InterfaceThis standard represents the Protocol Implementation Conformance Statement Proforma, per ISO/IEC 9646-7 (1995) and ITU-T X.296, for conformance... Withdrawn Standard
802.16-2004/Cor 1-2005 - Corrigendum to Standard for Part 16: Air Interface for Fixed Broadband Wireless Access SystemsThis corrigendum contains substantive corrections to IEEE Std 802.16-2004. It corrects errors, inconsistencies, and ambiguities in that standard.... Superseded Standard
802.16/Conformance02-2003 - Conformance to Standard 802.16 - Part 2: Test Suite Structure and Test Purposes (TSS&TP) for 10-66 GHz WirelessMAN-SC Air Interface(Conformance to IEEE Std 802.16-2001 as amended by IEEE Std 802.16a ™ -2003 and IEEE Std 802.16c ™ -2002). This standard represents the Test Suite... Withdrawn Standard
802.16/Conformance03-2004 - Conformance to Standard 802.16 - Part 3: Radio Conformance Tests (RCT) for 10-66 GHz WirelessMAN-SC Air InterfaceThis standard represents the Radio Conformance Tests (RCT) specification for base stations and subscriber stations based upon the WirelessMAN-SC... Withdrawn Standard
802.16/Conformance04-2006 - Conformance to 802.16 - Part 4: Protocol Implementation Conformance Statement (PICS) Proforma for Frequencies below 11 GHzConformance to IEEE Std 802.16-2004 This amendment updates and expands IEEE Std 802.16-2004 to allow for mobile subscriber stations. Active Standard
802.16a-2003 - Amendment to Part 16: Air Interface for Fixed Broadband Wireless Access Systems - Medium Access Control Modifications and Additional Physical Layer Specifications for 2-11 GHzThis document amends IEEE Std 802.16-2001 by enhancing the medium access control layer and providing additional physical layer specifications in... Superseded Standard
802.16c-2002 - Part 16: Air Interface for Fixed Broadband Wireless Access Systems - Amendment 1: Detailed System Profiles for 10-66 GHzThis amendment updates and expands Clause 12 of IEEE Std 802.16-2001, which concerns system profiles that list sets of features and functions to... Superseded Standard
802.16f-2005 - Part 16: Air Interface for Fixed Broadband Wireless Access Systems - Amendment 1: Management Information BaseThis document amends IEEE Std 802.16-2004 by defining a management information base (MIB) for the MAC and PHY and associated management procedures. Superseded Standard
802.16g-2007 - Part 16: Air Interface for Fixed and Mobile Broadband Wireless Access Systems - Amendment 3: Management Plane Procedures and ServicesThis standard defines management procedures as enhancements to the IEEE 802.16 air interface standard for fixed and mobile broadband wireless... Superseded Standard
802.16j-2009 - Part 16: Air Interface for Broadband Wireless Access Systems Amendment 1: Multihop Relay SpecificationThis amendment specifies OFDMA physical layer and medium access control layer enhancements to IEEE Std 802.16 for licensed bands to enable the... Active Standard
802.16k-2007 - Media Access Control (MAC) Bridges - Amendment 2: Bridging of 802.16This document amends IEEE Std 802.1D, as previously amended by IEEE Std 802.17a¿-2004, to support the bridging of the IEEE 802.16 medium access... Superseded Standard
802.17-2004 - Specific Requirements - Part 17: Resilient Packet Ring (RPR) Access Method and Physical Layer SpecificationsThis standard defines the medium access control characteristics, physical layer interface methods and layer management parameters for the... Superseded Standard
802.17c-2010 - Specific requirements Part 17: Resilient packet ring (RPR) access method and physical layer specifications Amendment 2: Protected inter-ring connectionA service provider's use of the architecture and protocols of IEEE 802.17 to support ring interconnection through dual station homing, providing... Superseded Standard
802.17a-2004 - Media Access Control (MAC) Bridges - Amendment 1: Bridging of Std 802.17This amendment to IEEE Std 802.1D-2004 defines support of the internal sublayer service by the IEEE 802.17 MAC. Superseded Standard
802.17b-2007 - Specific Requirements - Part 17: Resilient Packet Ring (RPR) Access Method and Physical Layer Specifications - Amendment 1 - Spatially Aware SublayerThis amendment enables a service provider to use the architecture and protocols of IEEE Std 802.17™-2004 to offer improvements in bandwidth... Superseded Standard
802.20-2008 - Part 20: Air Interface for Mobile Broadband Wireless Access Systems Supporting Vehicular Mobility -- Physical and Media Access Control Layer SpecificationThe technical requirements of this standard form a compatibility standard for mobile broadband wireless access systems. The standard ensures that... Active Standard
802.20b-2010 - Virtual Bridged Local Area Networks Amendment 15: Bridging of 802.20This amendment specifies the mechanism for the support of bridging of IEEE 802.20 networks. Active Standard
802.20.2-2010 - Conformance to 802.20 Systems--Protocol Implementation Conformance Statement (PICS) ProformaThis standard represents the Protocol Implementation Conformance Statement Proforma, per ISO/IEC 9646-7 and ITU-T X.296, for conformance... Active Standard
802.20.3-2010 - Minimum Performance Characteristics of 802.20 Terminals and Base Stations/Access NodesThis standard specifies minimum performance parameters and the associated test methodologies for implementation of IEEE 802.20 compliant systems.... Active Standard
802.21-2008 - Media Independent Handover ServicesThis standard specifies IEEE 802reg media access-independent mechanisms that optimize handovers between heterogeneous IEEE 802 systems and between... Active Standard
802.21a-2012 - Media Independent Handover Services - Amendment for Security Extensions to Media Independent Handover Services and ProtocolAmendment to IEEE Std 802.21-2008. Extensions to IEEE Std 802.21-2008 are provided for security mechanisms to protect media independent handover... Active Standard
802.22.1-2010 - Specific requirements Part 22.1: Standard to Enhance Harmful Interference Protection for Low-Power Licensed Devices Operating in TV Broadcast BandsThis standard defines the protocol and data formats for communication devices forming a beaconing network that are used to protect low-power,... Active Standard
802a-2003 - Overview and Architecture - Amendment 1: Ethertypes for Prototype and Vendor-Specific Protocol DevelopmentIEEE Std 802-2001, IEEE Local and Metropolitan Area Networks: Overview and Architecture, provides an overview to the family of IEEE 802 Standards.... Active Standard
802b-2004 - Overview and Architecture - Amendment 2: Registration of Object IdentifiersIEEE Std 802-2001, IEEE Local and Metropolitan Area Networks: Overview and Architecture, provides an overview to the family of IEEE 802 standards.... Active Standard
1802.3-1991 - Conformance Test Methodology- CSMA/CD Access Method and Physical Layer Specifications - Currently Contains Attachment Unit Interface (AUI) Cable (Section 4)Methods for conformance testing to satisfy requirements arising from the ISO/IEC 8802-3 (ANSI/IEEE Std 802.3) standard are defined. The... Superseded Standard
1802.3-2001 - Conformance Test Methodology for IEEE Standards for Specific Requirements - Part 3: Carrier Sense Multiple Access With Collision Detection (CSMA/CD) Access Method and Physical Layer SpecificationsAbstract methods for the conformance testing of 802.3 Clause 14 (10BASE-T MAU)implementations in order to satisfy conformance requirements arising... Withdrawn Standard
Displaying results 241 - 280 of 300 - all results